Using iTunes on Mac or Windows device comes with several distressing error and glitches. One such error is iTunes error 50, which is mostly faced when users are downloading or updating their iOS device to the latest version or rollback to the previous version respectively. And this iTunes error has been complained by several to be the most stressing issue and also quite hard to fix. This iTunes error comes with an error message reading “An unknown error occurred(50).” Such kind of iTunes error code can occur due to many reasons. Internet connection issue and outdated iTunes version might be the main culprit for this error. Hence, check and attempt to fix this iTunes error on your own with the effective methods discussed below. Following the methods discussed in this article, you can easily eradicate this problem and continue with the normal workings of the iTunes application.
What Factors are Responsible for iTunes Error 50
Before moving on to the troubleshooting section, you need to know the proper reason behind the iTunes error 50. Basically, iTunes error -50 is a permission error that appears either on your iDevice or computer. And it arises when you don’t have the permission to modify the data. But, it can also appear for some other reasons. To identify them, take a deep look right below:
- Outdated iTunes version
- Virus or malware infection
- Corrupted system files
- Improper installation of iTunes software
- Corrupted iTunes files
- Third-party software conflicts
Outdated iTunes Version
If you are using an outdated or old version of iTunes, then you might encounter this iTunes error 50. Most of the users have reported that when they are running an older version of iTunes, they faced this error code 50.
Virus or Malware Infection
In most cases, due to the malware or virus infection, the iTunes related files get corrupted. Besides, common bugs and malware can also erase files and folders associated with iTunes. Usually, this issue arises when there is a severe power failure and the device shuts down during the booting process.
Corrupted System Files
Another potential cause behind this trouble is damaged or corrupted system files. Booting related files and folders can suddenly disappear if you take out the installation disk and stop the procedure. And as a result, users get stuck with iTunes error 50 and the display screen turns black for a fraction of second.
Improper Installation of iTunes Software
Sometimes, error 50 occurs due to an incomplete or corrupted installation of iTunes software. In such a situation, when users are trying to open iTunes software, “iTunes error 50” error message pop up on their display screen.
Corrupted iTunes Files
Similarly, due to an iOS update failure, the iTunes files become corrupted or damaged. And as a result, such kind of error code appears. In addition, in certain cases, due to malware or spyware attack, iTunes files gets corrupted.
Third-Party Software Conflicts
If you have more than 1 third-party software installed on your device, then it can conflict with each other and create several major to minor issues. iTunes error -50 is one such issue that can arise due to the software conflicts.
These are the major causes behind iTunes error 50. And this can damage your device and computer entirely. So, it is quite essential to learn the proper ways to eliminate this iTunes error permanently.
How to Fix iTunes Error 50?
Here, in this section of the article, we will be going to mention some simple hacks that can resolve the iTunes error 50 efficiently. However, you need to follow these hacks in the same order as we have given. So, let’s begin.
Solution 1: Restart Both Computer and Device
Before performing a more technical task, it is necessary to restart both of your computer and device. In most cases, after restarting both the computer and iDevice, the majority of iTunes error codes will be resolved. But if this process doesn’t work for you, then you can proceed to the next trick.
Solution 2: Update iTunes to the Latest Version
Compatibility issues can sometimes show iTunes error 50. So, if the previous method has been unsuccessful, then updating the iTunes to the newest version can make the issue go away. So, in order to update iTunes to the latest version, you need to open the iTunes first. Then, hit the Help option that is present on the top menu. Now, click on Check For Updates. Once you are done, you will see the updates (if available). Here, just press the Install Update button. Once you hit this button, the updates will automatically download in the background. After that, restart your device and check the difference.
Solution 3: Open iTunes with Administrator Access
After updating iTunes to the latest version, if you don’t find any positive result, then there is a high chance that the issue is indeed related to the permissions. Therefore, if you don’t have the adequate access to manage the files that required to be synced, then you can attempt starting the iTunes with Administrator Access.
In order to start iTunes with Administrator Access, you need to click on the desktop icon and then hit the Run As Administrator option. Now, open the iTunes with Administrator Access and check whether is iTunes error 50 is resolved or not.
After performing the actions, if you don’t see the iTunes error, then, to resolve it permanently, you need to click on the iTunes shortcut and press the Properties option. Now, you need to navigate to the Compatibility tab and then, locate the “Run This Program As An Administrator” option. Finally, click on the Apply button as well as the OK button in order to save the new changes.
Solution 4: Modify the Permissions for iTunes
If the previous solution has been unsuccessful to resolve the iTunes error code 50, then there is another way that you can check that the problem is not associated with your device permissions. But, before performing this process, you need to make sure that you have already updated your iTunes software to the latest version. You can modify the permissions for iTunes by applying the instructions as given below.
- At first, you need to close iTunes along with all the dialog boxes related to it.
- Once you are done, go to the File Explorer menu and then select the iTunes folder. You might find it within the default Music folder.
Note– If you don’t find iTunes there, you need to reset a custom location for it.
- Now, navigate to the General tab and then uncheck the “Read Only” option.
- After that, select the Apply button in order to confirm.
- Once you hit the Apply button, immediately after, you will be prompted to define your changes.
- Here, you require to toggle next to “Apply Changes To This Folder, Subfolder, And Files” and then, hit the OK button in order to confirm the changes.
- Now, select the iTunes folder and choose Properties again.
- This time, go for the Security tab and select the System that is present under the “Group Or User Names”, and then hit the Edit option.
- Here, navigate to the “Permissions For System” and be sure that the “Allow Box” of Full Control option is selected. Now, press the Apply button to confirm the changes.
In this way, you can easily modify the permissions for iTunes and check whether the issue has been resolved or not. If not, then you can go to the next solution.
Solution 5: Edit the Windows Registry Entries
At times, corrupted Windows registry entries might lead you to the iTunes error 50. If this
is the case, then, you need to edit the Windows registry entries.
To perform this action, you have to select the Start menu and then, go to the Search box. Now, in the Search box, enter “Command” and hit the Enter key or click on the OK button. Here, you will find a permission box, just write “regedit” and hit the Enter button. Now, you will find a new window, where you need to click on File>Export and save the selected key to a folder you want. Next, you have to see if the “Selected Branch” option is checked in Export Range and then, hit the Apply button in order to save the new changes.
Solution 6: Update the iOS
If you are running an outdated version of iOS which is not compatible with the latest version of iTunes, then Microsoft may show you such kind of error codes. To overcome this situation, it is recommended to update the iOS to the latest version. To do so, primarily, you need to navigate to the Settings, and then, go to the General Settings. Now, in the General Settings, you need to hit the Software Update button. If updates are available, then select the Download And Install button.
Note– While processing this action, if a pop up appears with a message that asks you to temporarily delete applications because iOS requires more space to install the updates, then click on Continue or Cancel. And iOS will reinstall that removed application again.
Solution 7: Check Anti-virus Software and Firewall
If none of the solutions work, then you might need to check your antivirus software and firewall settings which might block the Apple server. Basically, iTunes requires many networks servers to finish the sync and update process, but sometimes, these directories check iTunes as virus software. So, you have to do a bit of investigation. To do so, follow the steps below:
Step 1: Firstly, you can open your antivirus software which is installed on your device. Here, check whether iTunes is blocked on not. Now, navigate to Firewall and make sure that iTunes is present on the exempted list.
Step 2: After that, close the virtualization app. Basically, outdated virtualization apps are noted to prevent USB communication, so, closing the virtualization app is required. Here, in conjunction with your software being updated, include and be sure the security software is updated as well.
Solution 8: Restore iDevice to Factory Settings
To restore your iDevice to the factory settings, you need to follow the instructions below:
Stage 1: Get your device ready:
- First of all, you have to make sure your iTunes software has been updated to the latest version.
- Then, you can make a backup of iTunes related important keys.
- Then, go to the Settings, and then, write your name and hit the iCloud. Just disable “Find My iPhone.”
Stage 2: Restore your Device
- First, open iTunes, and then, connect your iDevice with your computer via a cable.
- Now, you will be asked to “Trust This Computer” option, then, follow the on-screen prompts.
- Once you are done, choose your device when it appears in iTunes.
- Then, go to the summary panel and tap on Restore Device button.
- Now, hit the Restore button to confirm the process.
- Once your iDevice is set to the factory settings, you have to restart your device and set it up as a new one.
Solution 9: Reinstall iTunes
After following all the above solutions, if you are still stuck with the same issue, then reinstalling iTunes is the last option for you. And you can do this by applying the steps as mentioned below.
At first, go to Settings, and then, tap on your name. After that, select the iTunes & App Store. Here, you have to click on your Apple ID and choose View Apple ID. Here, if you might be prompted to type your password. Now, scroll down to select the iTunes in the iCloud section. Next, hit the Remove button in order to remove iTunes from that device. Once you are done, follow the on-screen instructions in order to reinstall the iTunes software.
These solutions are quite helpful and have been effective in resolving iTunes error 50 for many. So, make sure that you implement them well. However, if you face any difficulty while performing these solutions, then you can share your doubts in the feedback section below. On the other hand, you always have the option to look up to the help provided by a professional.