Category Archives: Macbook Support

Contact Apple Technical Support Number Now:

Fix Sound Problem on MacBook

How to Fix Sound Problem on MacBook?

Mac systems showing sound problems are very common among the users. Without sound, how will you hear your favorite songs or how you can use voice commands to run various applications controlled by sound system on Mac? Let it fix by trying few effective troubleshooting process to restore the sound settings and other issues.

Check the Volume Control Button

The first and most common mistakes, when a user mute the volume and try to run music files or watch video that not make any noise. Volume button located on right-side of the keyboard on F11 key, press it up and if it doesn’t works then go to menu bar and move the volume slider up. If any issue, get MacBook support for online help.


Check the Headphone you are plugging

Your headphone may also have some problem that can create errors or you will not able to hear the sound on your MacBook. Check whether it is not connected with your Mac, if yes, then you will be not able to hear the sound through open speaker on any Mac device.

Check System Preferences

Go into the system preferences and open sound and click on output tab and also on internal speakers. If in the system preferences output volume is muted, then uncheck the box showing mute button. And also make sure the volume key output volume slider is dragged to extreme right. Adjust these settings carefully to avoid major issues.

Adjust or Reset the SMC Service

System management controller, another important setting you need to reset for listening Mac computers sound output. This is a very important setting you should take help from tech professionals who will do this job better while troubleshooting this problem. To change first shut down your computer disconnect from power cord and wait for few seconds before restarting. Now call to MacBook support phone number +1-855-242-5902 for help.

Reset Parallel Random-Access Machine (PRAM)

You can also try another troubleshooting process that is resetting of PRAM by restarting your computer and pressing keys Command, Option, P, and R and keep them holding down until system restarts and you hear chimes sound. Keep them pressing until rings again and release to complete the PRAM reset process successfully. It will help to improve the performance of RAM and sound output of your MacBook device.

How to fix Bluetooth Not Available on MacBook

How to Fix Bluetooth Not Available Error on a MacBook?

Bluetooth helps to connect Mac with other devices for transferring various types of files wirelessly. But if it is not working or showing a problem while using in your MacBook how you will share data to other devices using this wireless technology.

Actually, there are multiple reasons that can cause Bluetooth related issues in MacBook devices. And you may encounter random appearance and disappearance of Bluetooth functionality even after rebooting your system.

When you try to open Bluetooth menu of Mac OS X you will find “Bluetooth Not Available” error displaying on your screen and sometimes “No Information found” also appears there through hardware system profiler. And situation becomes critical when Bluetooth frequently disconnects from our MacBook which can be solved by following troubleshooting process.



Remove Bluetooth from System and Shutdown Your Mac

Go to Bluetooth plist file under system preferences and delete “” permanently from your MacBook system. You can also use shortcut Command+Shift+G through OS X finder where you will find the “” that should be deleted to install new one. However, if you face any kind of technical problem you can take MacBook tech support help for quick online assistance at your desk.

Reboot Mac SMC on Your System

Now reset the SMC that stands for “System Management Controller” which may affect other hardware settings and power functions, which is also use to solve other hardware issues. Now shutdown your Mac properly and remove battery and connected adapter. If you have MacBook Air get MacBook Air support to perform this action.

To boot your Mac as normal mode hold down the power button for less than half minutes and then place the battery and adapter in right manner. If your MacBook battery is non-removable you can shut down your Mac while pressing Control+Shift+Option+power button together for at least two seconds before releasing all of them.

Reset Power Functions or PRAM

Similarly you have to reset PRAM by pressing power button then hold down Command+Option+P+R keys simultaneously till you receive the computer sound two times. The processes of resetting of these functions are slightly different as per the hardware configurations of different MacBook devices.



MacBook, MacBook Pro, MacBook Air, Mac Mini and iMac all have minor differences to complete this process. However, despite all these efforts if your Bluetooth is not working properly or you are unable to fix Bluetooth Not Available Error, you can get MacBook Technical Support to check the problem at professional level, perhaps there is could be hardware problem affecting it.

Prevent MacBook from Overheating

How to Prevent MacBook from Overheating?

MacBook runs with higher processor speed for better performance and output. Running Mac machine nonstop heats-up its engine that can create a problem if taken lightly. Overheating of Mac devices affects its speed and performance at various stages of use.

Overheating becomes a major issue when Mac restart itself or frizzes without a notification, and consequences could be damaging in terms of data loss or system crash. But you can avoid such snags, if you follow steps given below for preventing MacBook from overheating.

Close High Demanding Applications

When a workload on processer overrides it generates extra amount of heat from the processing engine section. If you run multiple applications or software at time, close down the high demanding software that consumes extra CPU usages. User can get MacBook technical support to manage such software that start automatically.

Use MacBook at Elevated Position 

Mainly the bottom of MacBook becomes hotter compare to other parts, because all the crucial parts that help to run this Mac machine are assembled inside this metal shell. To cool down this particular surface a contact of free-flow of air should be allowed to keep your device calm. Hence, it is recommended to use laptops at higher position to allow air underneath and to do that always use a laptop stand having gap in the bottom.



Set Fan at Higher RPM for Better Speed

You can control the speed of fan that helps to control the temperature of MacBook Air & Pro devices. Excusive apps comes with a shortcut feature using that you can anytime set fan speed of your MacBook device at higher RPM, and that would be possible at one click. However, if there is issue with fan speed, contact to MacBook Air Support.

Clean and Keep Your MacBook Dust-free

Older models of Mac machine arrested in the cluster of mesh and dust that accumulated surrounding of vents and fan chamber that block airflow triggering the overheating of Mac. Hence, if your MacBook Pro becomes older, you should clean it to remove dust and tissues from the every corner. To do this job carefully you can take help of technicians working MacBook Pro Support +1-855-242-5902 and protect the device from overheating.

Protect Your Apple MacBook Laptop from Cyber Threats

How to Protect Your Apple MacBook Laptop from Cyber Threats?

MacBook devices are highly secured with inbuilt security Features of Mac OS X but it is not necessary, that it is safe from all level of cyber threats. There are few things that can affect its speed and performance or create some other technical problems.

Mac OS X has been upgraded many times with new features but still your Mac could have risk. Actually, third-party software you install increases the risk for Mac laptops. But few tips given below can help you to secure your Mac computers from risk that can affect its performance.

Update and Install Mac OS Software

Apple technicians keep updating the Mac OS X operating system used in MacBook computers. When you get notification to update the existing version, then take MacBook Technical Support and update your Mac OS for better user-interface and security. Updating software or operating system helps to fix bugs and advances security settings.    

Separate User Account for Daily Use

To make your Mac secure, you should create two user account, one for administrator use and another for daily use. Storing files and installing applications through a single account increase the risk of data as well as important software setup. If you need any assistance to create user account, call to Mac Tech Support for instant online help.


Activate Firewall of Mac OS X

Mac OS X has its own firewall that should be enabled which is usually not activated by default. A firewall setting is used to control the Mac network connections that help to block unwelcomed programs to access into your computer system. The settings of Firewall depend on the version of Mac OS X which should be adjusted only with the help of experts.

Disable Auto Open of Downloaded Files

Most of the Mac user’s browser internet through safari browser, which has by default setting of open every file automatically after downloading from the web. Disable this feature to avoid risk of downloading the infected files or adware. Go to Safari preferences and open general to uncheck the box given next to “Open safe files after downloading the files.


Top Five Tips and Tricks for MacBook

Your MacBook is more than what you think. There are many actions which you can do with few tricks that will bring help you to perform various activities quickly or without too much efforts. Apple Mac OS X is loaded with cognitive features to make certain process easier and interesting. Below we have shared few useful tips and tricks for Mac users.

Customize Screenshot with Specific Size

Using Cmd + Shift + 4 simultaneously you can take screen shot of a specific area on your Mac screen. Or you can click and drag out a box over the part of your computer screen you want to take shot. Your captured image will be saved on desktop screen.

Run Windows on Your Apple MacBook

It’s unbelievable, that you run Microsoft windows on your Mac. Though, to enjoy this OS you need to get help from MacBook technical support. You can part your hard drive between Mac OS and Windows OS but they will be not accessible through other OS. Once, you install windows on your Mac, you have to choose one OS at a time and restart everything for other.        


Rename Large Number of Files at Once Click 

Renaming large number of similar files is a very time taking process, but if your Mac has OS X Yosemite, you can do that easily. Just select all files you want to rename and right-click on rename to give the similar names with increasing numerical value renamed at the last name of each file. To perform this action successfully you can take MacBook help.

Upload Signature to Documents on Mac

You can add digital signature to the documents saved in your Mac computers. Just click the pen icon appearing top right corner of the screen and select create signature through Built-in iSight. You have to sign your signature on plain paper and hold it in front of computer camera well-aligned as per the screen and camera position to accept it in right manner.

Unit/Measurement Conversion at One Click

You can convert units on Mac at one click by putting the value with the wide options to convert in various measurement or units. From distance, to currency you can find list of all usable units to convert from various forms. If your conversion app is not working on your Mac, just get Mac OS X Tech Support and update the version for using this application uninterruptedly.

Top Reasons Your MacBook Not Turning On

Top Reasons Your MacBook Not Turning On

If your Apple MacBook is not turning on there could be multiple levels of issues that can affect its booting process. You just need to find out the prime cause to diagnosis the possible breakdown and for that you can also take help of Apple Technical Support at your desk. Check below the top reasons that can stop your MacBook from turning on or affect booting process.

RAM Related Problems

Insufficient or faulty RAM also creates problem while turning on your MacBook. If your MacBook beeps three times it means there is RAM issue, check either you have low RAM or there is technical fault in the RAM slot which need be checked by accessing chip. If you have two RAM chips, pull out each one by one and watch which one affects its booting process.

Dead Battery or Bad DC Adapter  

If your MacBook battery is dead you cannot turn it on, and you can check it by connecting to the power and turn on. If it starts, it confirms the battery is dead and not charging to give power backup. And dead battery could be due to bad DC charger you are using for charging your MacBook. You can use another adapter to check the charging, and if problem  persists, it means there is another issue that could be detected only with the help of MacBook Technical Support.

Top Reasons Your MacBook Not Turning On

Hard Drive Related Issue

If hard disk of your MacBook got damaged, corrupted or erased you will face booting problem. If your hard drive got damaged you need to replace it with the new one as per compatibility. Corrupted hard drive often gradually start showing booting related issues that can be solved by replacing the hard disk with new one. If despite of replacing hard drive your problem persists, just get the Apple mac support to find the issues and troubleshoot the error with best solution.

Operating System Related Issues

Not turning on your MacBook means there could be operating system related issues. To check that, try booting off an OS CD and run the apple disk utility to repair the disk or you can also try other applications to repair that. If you fail to repair, then reinstall the operating system. But before that get Apple Mac Help to keep the backup of your hard disk and erase all the data.

Enhance MacBook Battery Life

Useful tips to Enhance MacBook Battery Life

Every laptop runs on rechargeable batteries that give power backup up to hours as per its capacity and type of use.  Apple MacBook series are known for better battery life and high performance but if you not use it or not charge in right manner, the battery life and battery lifespan would be gradually reduced.

Battery Life, called to the number of hours your device runs on a single full charge. While Battery Lifespan is known as the number of years or time your battery lasts until you need to replace it with new one. However, you can maximize the Life and Lifespan of your MacBook battery through following tips.

Keep Update Your OS with Latest Version

Every time when apple releases the new version of its operating system (OS) it helps to improve the performance of MacBook and remove the bugs. And each new version of Apple OS includes advance energy-saving technologies to enhance the performance and life of MacBook battery. Hence, always check your MacBook OS and make sure to use latest version to keep it updated. If you don’t know how to update latest OS, take help of Apple Technical Support Services 1-800-281-3707 technicians to carry out this process.   

Take out Battery Cases during Charging 

Covering your device with cases while charging can generate heat, that will also affect its power capacity. Though, it helps to protect your device from dust and external atmosphere but at the time of changing you should remove it, especially when it becomes hot to maintain its temperature.

Charge Fully Every time You Plug in the Socket 

Many users plug their MacBook into socket to recharge it, but never charge it fully that affects Lifespan of Battery. Hence, you should always recharge your battery fully to enhance the Battery Lifespan of your MacBook device. It also helps to save electricity and efforts to recharge your battery again-and-again.

Charge Half When Store for Long Time Period

If your MacBook is not in use or you wanted to keep it for long time period keep it half­-charge. Because, keeping a fully discharge battery could fall into a deep discharge state and on the other hand, keeping battery fully charged for longer period without use also affects the capacity and lifespan of battery. And you should also keep your battery at cool and moister-free environment at around 30 degree Celsius. However, depending on your time period of keeping your MacBook for long period the performance and life span of battery get affected. However, for battery related issues call to Macbook technical support.

connect your Apple MacBook to TV

How to connect your Apple MacBook to TV?

MacBook computers are built with many amazing features, one of them is connect it with TV and watch your favorite music videos on a bigger screen. The process depends on the Mac series you have and type of connection port in your laptop. Below you can find the right process to connect your MacBook with TV and enjoy a theatrical viewing experience at your home.

Actually, there two main different ways to connect your Apple laptop with your TV, and to establish right connection, contact to MacBook Technical Support and you will get online assistance to carry out this process successfully. But before that you can try the process given below.

Connect Through Display Port Adaptor and HDMI Cable

This is one of the cheapest ways to connect your Mac with TV at low cost. Use a Mini DisplayPort Adaptor and a HDMI cable to connect your television with your Apple laptop that will directly connect your MacBook with large display screen TV.

Put the plug into the socket of thunderbolt socket on the side of MacBook port and MiniDisplay port with HDMI adopter that enables you to plug a HDMI cable at the other end. To compete this connection process you need to have HDMI cable that you have to connect to HDMI adaptor and with MiniDisplayPort to the thunderbolt connection on your Apple MacBook and now plug HDMI cable adaptor with HDMI and then with your television.

The whole process seems complicated for you so you can take help of mac technical support to understand appropriately which plug you have to put in which port. Now, once your laptop in connected with your TV, then you can see the same window of your MacBook displayed on the screen of your TV. And now you can adjust the display resolution through system preferences where you will find two options one for your Mac and another for TV.

Connect your Apple Mac Using a Set-top box

This process is quite easier as even if you don’t any idea of how to connect mac to TV, then also you can easily attach using set top box called apple TV. Using an apple TV device you can connect your mac laptop with your TV and view all the display on the bigger screen. This device is more convenient and practically functional to enjoy the apple OS on the bigger screen with round-the-clock Apple Mac Tech Support for users to solve any type of issue with Mac.

Use Multi-Touch Gestures On Your MacBook

How to Use Multi-Touch Gestures On Your MacBook?

Apple MacBook known for many innovative features, trackpad gesture is one of them offers a very useful option to control various functions or perform useful task on your MacBook using your fingers only. You can quickly zoom in, or zoom out or can scroll and navigate the documents or multimedia applications.

Using the multi-touch trackpad you can swipe, pinch, tap and spread your fingers in different directions to perform various actions in just few seconds. Trackpad gesture works only with MacBook OS X Lion and above versions and below you can learn how to use trackpad gestures to navigate OS X.

How to Scroll: Scrolling is usually possible with mouse only, but Mac OS X makes it possible only using your two fingers by sliding to fingers up or down as per the page open on your website.

Zoom in & Out: You can zoom large or minimize any page or images on your Mac OS. Just pinch with two fingers to zoom in or out and double tap with two fingers to zoom in and out automatically.

Notification Center: You can open notification center using your fingers by swiping in fingers from the left to right edge. This is very helpful to open notification center within few seconds.

Rotation of Articles: Using trackpad gesture you can rotate images and other items on your MacBook. Move two fingers around each other to rotate such items, or you can also take Mac OS X support.

Launchpad Open: If you want to open Launchpad just pinch your thumb and three fingers together to display Launchpad. This application helps to view the installed your apps and launch them on one click.

Show Desktop: To show the desktop of your Mac computers you have to spread your thumb and three fingers separately. This action is just opposite the gesture act used to open Launchpad.

Mission Control View:  Use your four fingers together on trackpad and swipe upwards that will show you all the windows together. And for collapsing all windows just swipe back down using your four fingers.

Look Up: This action helps to find or search a word or synonyms. Just tap on particular word using three fingers to look up a word to find its definition or search synonyms etc.

Three Finger Drag: This gesture action on trackpad helps to drag the window around the screen. You have to use three fingers and drag an item on screen and if you are facing any problem while using these gestures just call- 1-800-281-3707 to online tech support for os x upgrade or problems with instant solution.

Understanding and Troubleshoot 5 Most Common Errors of MacBook OS

Understanding and Troubleshoot 5 Most Common Errors of MacBook OS

MacBook computers work on the most advance technology and there could be unexpected errors stopping you to move further. Though each error message is clearly defined to instruct the user and follow the next step accordingly but sometimes it’s hard to recognize. Hence, you need to know what each Mac error means so that you can take corrective measures or call to apple technical support to solve the issue.      

Error 1: The Application “Program Name” Quit Unexpectedly

This error is one of the most common error messages of Mac OS X. This message occurs once in a blue moon and not affects other programs or applications. To remove this you can restart the application and it will be most probably not visible there. You can also see the details of the error and re-launch the app.

fix Application “Program Name” Quit Unexpectedly

Error 2: When You Startup Disk Is Almost Full

As the message displays when your MacBook’s hard drive is full and there is no space left any more to store anymore data. You just need to free some space from your MacBook hard disk. To make a space you can take help of apple tech support or simply empty the trash folder as it can give you lots of space.

fix When You Startup Disk Is Almost Full

Error 3: You Cannot Open the Application As It Is Not Supported By This Type Mac

Your operating system will show this error message if you cannot run a particular application on your current version of Mac OS X. Hence, you need to update the affected program as recent versions may work only with other versions of Mac OS. Usually app developers release the latest versions to update with an Apple Mac OS X update sooner or later. If there is no such update you can get mac technical support to check the other possible measures and fix them to update your MacBook.

fix Cannot Open the Application

Error 4: A Folder with Question Mark

This error means that your Mac cannot find your hard disk, as Mac OS can start with multiple other drives including external connected derives and when it disconnected and system startup then this errors message appears. And this error message can also appear when there is something wrong with your Mac’s internal hard disk. And if it not works you can contact to mac support number for quick help.

A Folder with Question Mark

Error 5: Error Report

Sometimes while using a program crashes itself and displays a message called “Error Report”. This error report is a list of all information that the developer uses to fix the common issues. You can click OK to send the report to the developer but you will not get a personal response. The entire data is gathered and used to detect the general issues, instead of a specific problem. And if this message appears again-and-again you can remove it from program’s preferences from the library or dial to apple help number +1-855-242-5902.