Category Archives: Fix iPad Error

Contact Apple Technical Support Number Now:


How to Fix iPad Error 4013?

iPad error 4013 is one of the common errors that annoy its users. Users generally encounter this error while trying to restore their iPad with iTunes. Once you encounter this error, the restore operation cannot be carried out and thus you can’t use your iPad until you get this issue fixed. Thus, we have stressed upon this error specifically in this article. Those who are experiencing this error on their iPad can refer to this article. Hope, it is going to help you and provide a proper solution. 

Methods to Fix iPad Error 4013 Manually

Generally, the 4013 error is associated with a hardware issue. Still, we have sorted out some of the effective ways that can help you in this aspect. So, let’s talk about them and solve the issue. 

Method 1: Check the USB Connector and Port

A faulty USB cable or port is found to be causing this issue in most of the cases. Thus, make sure that the USB connector or the port isn’t faulty.

  1. To ensure this, connect your iPad to another USB port of your PC via the same USB cable. 
  2. Then launch iTunes on your PC and try to restore your device. 
  3. If the process fails, then change the USB cable and try out the restore process. 
  4. If the iPad restore error 4013 repeats itself, then none of the USB port or connector is faulty. 
  5. Hence you will need to go for some other solution. 

Though it is easy to apply the methods, it is difficult to figure out the actual cause of this error. Thus, you can consult with a tech expert to help you in this regard. 

Method 2: Configuration of iPad

Configuration of iPad

iPad error 4013 can occur due to an incorrect configuration of the iPad. Thus, reset your iPad settings in order to fix system malfunctions by the following steps:

  1. At first, restart the iPad and open the Settings app. 
  2. Navigate to the ‘General Settings’ section and tap the ‘Reset’ button.
  3. Then select the ‘Reset All Settings’ option and wait for the process to complete.

Method 3: Check the Internet Connection

  1. At first turn off the WiFi on both your iPad and computer. 
  2. After a few seconds, turn on the WiFi on your iPad as well as your computer. 
  3. Then launch iTunes on your PC and see whether you can restore your device or not. 
  4. If the process fails, then shift to another network that has good strength. 

Method 4: Enable the DFU Mode

Enable the DFU Mode

DFU Mode is also known as the Recovery Mode that is capable of fixing different iOS problems in no time. 

  1. Connect your iPad to your PC via a USB connector and open iTunes. 
  2. Press and hold the ‘Sleep/Wake’ and ‘Home’ buttons on your iPad until it enters the DFU mode. 
  3. Now release the buttons mentioned above and restore your iPad. 

Method 5: Update iTunes

Update iTunes

  1. Turn on both your iPad and computer and connect them to a wireless connection. 
  2. Now, launch iTunes on your PC and click the ‘iTunes’ menu on the iTunes window. 
  3. iTunes starts checking for the available updates and displays if any updates are pending. 
  4. Then click the ‘Install’ button next to the pending updates to get them on your PC.
  5. After installing the pending updates, see whether it is possible to restore your iPad or not. 

Method 6: Free Up Disk Space 

Free Up Disk Space 

Restoration of iPad with iTunes might fail if there isn’t enough space available on your device. Hence free up some space on your iOS device to check whether you can restore your device or not. 

  1. Turn on your iPad and open the Settings app. 
  2. Click the ‘General’ tab on the Settings window and select the ‘Storage and iCloud usage’ option. 
  3. Tap the ‘Manage Storage’ button and choose an app which you think is taking too much space on your device. 
  4. Tap and hold the app until an ‘Uninstall’ option appears. 
  5. Then, select the ‘Uninstall’ option to remove that app from your device. 
  6. Repeat the same process if it is essential, to uninstall more apps installed on your iPad. 
  7. Now, restore your device and if the process is successful, then you can re-download the uninstalled apps from the App Store. 

Method 7: Perform a Factory Reset

Perform a Factory Reset

It is the last method you can attempt if the above methods fail to fix the iPad error 4013. Note that it is a bit complicated method and can delete all data on your iPad. Thus, it is recommended to backup your device before applying the following steps:

  1. Turn on your iPad and make sure that it is connected to a network.
  2. Go to Settings and tap on ‘iCloud.’
  3.  Move to the ‘Backup’ tab and choose ‘iCloud Backup.’
  4. Tap the ‘Backup Now’ button and wait until the backup is complete. 
  5. Then go back to Settings and select ‘Manage Storage’ to ensure that you have backed up your iPad successfully. 
  6. Now open the Setting app once again and tap the ‘Reset’ button under the ‘General’ tab.
  7. Tap the ‘Erase All Content and Settings’ button and enter the passcode you have set for your device. You don’t have to worry if you haven’t set a passcode for your device beforehand. 
  8. When prompted, enter both your Apple ID and password to start the factory reset. 
  9. When the reset is over, you will come across a welcome screen which you need to swipe. 
  10. Hope, you won’t have any issues in restoring your device now. 

The methods discussed in this article are already tested and fixed iPad error 4013 successfully for a number of users. Therefore, hopefully, you will also find them useful and get rid of your problem without any hassles. For any additional information or queries, shoot your feedback in the comment section below. 


How to Fix the iPad Sync Error 54?

If you are an ardent user of Apple iPad and presently facing this particular iPad sync error 54, then do not panic. Because this is something you will totally be able to fix all by yourself. And therefore, this article here will help you do just that. Therefore, you don’t need to look for a professional service to fix this issue.

Prominent Reasons Behind the iPad Sync Error 54

Although it is true that this iPad sync error is something you can fix by yourself, you will need good technical instructions for that, something you will get here in this article. But, there is something much more useful which will make the process hassle-free.

And that is the sole reason for which you encounter this particular error code. And once you know the reasons for it, you will be able to better understand all the technicalities involved in resolving this annoying error. 

That is why, in this section, you will find out about the reasons why the iPad sync error 54 is occurring. 

The first among all the causes is that the system drivers did not get the latest updates. Since updates are a critical factor for the proper functioning of iPad, lack of which will cause these error message issues. The most prominent among them is error 54. 

But what makes this that much complicated is the fact that this error code creates a problem with the updates. So, the straightforward process of just downloading and installing the update may not be the best bet for you.

In case there is any glitch in the downloading process, the iPad will have an issue with examining the update. And as such, the error 54 is what you might come across. Thus, you will not be able to update the software.

If not this, then another obvious cause of this error code issue is a technical issue associated with the Apple Application Support. This is a rather important component of the updating process that causes this error. 

Last and final possible cause of this issue is if there be a contact failure with the server. Then, in that case, the occurrence of this particular error code is imperative. 

So, now that the possible reasons behind this error code are clear, go through the rest of the article to know “how to fix the iPad Sync error 54?” 

How to Fix the iPad Sync Error 54?

Now, in this section, let’s look at how we can fix this error using suitable hacks. Follow these solutions one by one and get to know which one works for you:

Get Updates for the Apple Software 

Since Apple Software Update app is the medium through which you can get all the necessary updates for iPad, you will have to update this to make it work right and thus, fix this error code. To do this, here are the steps – 

  • In order to begin, move to the Apple Software Update app from your computer system. 
  • Now, have a look for the available updates for that app. When you find it, click on the checkbox. 
  • Furthermore, click on the Install button in order to download and install the update. 
  • Now, look for the updates for the iPad app and then install that as well. 

With this, you can easily be able to fix this particular error code. And as you can see that you will be able to update it once again. 

Get the Latest iPad Update Manually

In case, if you are unable to get the iPad updates anyway, then this is what you can do to resolve such an error:

  • First and foremost thing is to uninstall the iPad application and every related component of it. 
  • After finishing the uninstallation, go to the official website of Apple and search for the latest version of the iPad.
  • When you find it, click on the download and then install that version. Then, follow all the instructions that you will find on the screen itself. 

Use of Troubleshooter

The troubleshooter is very useful that can come in very handy if you are facing error codes like this one.

All you have to do is find the troubleshooter with the help of the Control Panel of your computer. Then, once you find it, you have to first make the troubleshooter software Run As Administrator. Once you do this, you will be able to use it to fix this iPad error code. 

Final Remark

So, as the troubleshooter is ready, you can use it to examine and solve the problem which is causing this particular error. Now, you know all the effective ways to resolve the iPad Sync Error 54.

Moreover, you can refer to the user guide to get a quick glance. Apart from this, if you have any new idea, you can provide that in the comment section.


What are the Methods to Fix iPad Error 9006?

iPad error 9006 generally occurs with the iTunes application. When a user tries to download, restore or update an iPad, the whole process suddenly freezes and iTunes sends an error message showing  “There was a problem downloading software for the iPhone. An unknown error occurred (9006).”

If you are you dealing with the same error and looking for a perfect solution, then you can follow this article as an immediate troubleshooting guide. The methods provided in this article will help you to fix this error instantly.

6 Methods to Fix iPad Update Error 9006

Here are some excellent methods, which will help you to overcome this error on your own. Try to follow the fixes one by one, until you get your iPad fixed.

Method 1: Update your iTunes version 

It can happen that you are getting this typical error if you are using an older version of iTunes. As a result of which it is getting incompatible with your device. So, you need to update the iTunes version you are using to resolve this error. Follow these instructions to update your iTunes version:

  1. First of all, open iTunes and go to Help. 
  2. Now, tap on the Check for update option.
  3. Once you notice an update is available, agree to the update and then follow the on-screen instruction in order to install the latest version of iTunes on your device.

After completing these steps, try to check the status of the error. If it persists, try to follow the next method. 

Method 2: Check Network Connection

You can also encounter this error if you are connected with a glitched internet connection. If such is the case, you should check the internet connection, whether it is functioning properly or not. If you are using a WiFi, check if the router and modem is working correctly.

Most of the times, checking and correcting network glitches can be a tricky business. So, you can always connect with a reliable technician to check and apply corrective measures to resolve this error. 

Method 3: Reboot the iDevice

You can also reboot your iDevice, to resolve this error. Follow these steps:

  1. First, press the Power (sleep/wake) button of your iDevice.
  2. Once you notice the Power slider displayed on the screen, you need to use it to turn Off your iDevice.
  3. After that, you need to use the Power button again to reboot the device.

If due to some reason, you can’t turn Off your device, you need to restart it forcefully. So, follow these instructions:

  1. Firstly, press and hold the Power and Home key at the same time until you notice the screen goes black. 
  2. After that, you will find the Apple logo appearing on the screen. Leave the button and your device will restart automatically. 

If this 9006 error still persists on your device, try to follow the next method. 

Method 4: Download the IPSW File

If iTunes fails to download the IPSW file, then also you can get this iTunes error 9006 on your device. So, you can resolve this issue by manually downloading that file and then use it to update or restore the iDevice. Try to follow these instructions:

  1. Firstly, you need to download the IPSW file from the official site. Make sure that, the downloaded file is compatible with your iDevice.
  2. Once you complete this action, you need to open iTunes and go to the summary section. 
  3. Next, you need to tap and hold the Shift key and then tap on the Update or Restore option as per your choice. 
  4. Now, it will open the file browser which will ask you to select the IPSW file.
  5. Go to the folder where you have saved the downloaded file and choose it. 

After that, your device will start updating or restoring the iPad and hopefully, the error 9006 will be resolved.

 Method 5: Reset the TCP/IP (for Windows 10 systems)

This is generally an internet connection related error. Hence, running some commands specific to resetting the winsock and rebuilding the DNS cache might help in resolving this glitch.

  1. In the Command prompt, try to run these commands in the listed order. Hit Enter after each.
    1. netsh winsock reset 
    2. netsh int ip reset 
    3. ipconfig /release
    4. ipconfig /renew 
    5. ipconfig /flushdns 
  2. After running these commands, check if this issue persists or not. If the issue is not fixed by this method, try to follow the method discussed next. 

Method 6: Make Sure that the Firewall is Not Blocking iTunes

You need to be sure that iTunes is not blocked by the firewall. In order to check this, try out these steps:

  1. Firstly, press the Windows key on your keyboard. In case, you notice there is no Windows key, you need to press the Control (Ctrl) and Escape (Esc) keys at the same time. 
  2. Tap on the magnifying icon or search field. After that, in the search field, you need to enter firewall.cpl.
  3. After that, Tap on firewall.cpl which is present in the search result. Now, you will find that the Firewall window will open.
  4. Now, tap on the  “Allow an app or feature through Windows Firewall” (Windows 10 and 8) or “Allow a program or feature through Windows Firewall” (Windows 7) and then tap on  “Change settings.” option. 
  5. After that, make sure that iTunes has been selected for both private and public networks, and that Bonjour is selected for private networks only. 
  6. In case you notice, that iTunes or Bonjour isn’t listed, you can try to click on the  “Allow another app” (Windows 10 and 8) or “Allow another program” (Windows 7). 
  7. If iTunes is not listed, tap on the Browse option and then navigate to the iTunes program. 
  8. If the  Bonjour isn’t listed, tap on the Browse option and then navigate to the mDNSResponder, which is in C:\Program Files\Bonjour\.
  9. Once you select one of the programs, tap on the Open option.
  10. After that, tap on the Add in the Add an app window (Windows 10 and 8) or Add in the Add a Program window (Windows 7).
  11. Now, in the Allowed apps (Windows 10 and 8) or Allowed Programs (Windows 7) window, tap on the OK button. 
  12. After that, you need to close the Windows Firewall window.

After completing these steps, hopefully, this 9006 error will be fixed. 

To Conclude

You can utilize the hacks that we have provided here to fix iPad error 9006 quickly and easily. Try to follow each and every step carefully. If you need any further guidance to resolve this error, you can always contact an expert. If you are aware of any other fix, you can leave that in the comment section below. 


Effective Ways to Fix iPad Error 1671

Many iPhone or iPad users get iPad error 1671 in iTunes while trying to update or restore their device. A lot of reasons might be responsible for the appearance of this error code. For example, if you have not updated the Operating System for a long time or if you are using an old version of the iTunes, then you might encounter this error code on your system.

However, you can easily resolve this error code with some effective techniques that we are going to discuss here. Therefore, if you are facing this issue and want to resolve it immediately, then you should stay in this article as in the remaining part we have come up with some practical solutions to fix the issue on your own. 

Fix iPad Unknown Error 1671 with Some Amazing Techniques

Here are some solutions that you can try to resolve this iPad error. However, before going to apply these solutions we suggest you keep a back up of all your important data and files.

Solution 1- Fix Error 1671 through Hard Reset

We suggest you apply this solution before going to any other. So, to hard reset your iDevice, at first, you have to press the Power On/ Off buttons until you see the Apple logo on the screen. While holding the buttons, a ‘slide to power off’ text may pop up on the screen. Simply ignore it, and continue holding down the buttons until the Apple logo appears. This will reset the iPad and hopefully will fix this error code 1671.

However, if this method is unable to resolve the issue, then here is an alternative fix for you.

Solution 2- Resolve the Error Code by Editing the Host File

To resolve the iPad error 1671, you can also edit the ‘host’ files. In order to apply this solution on your device, here are the steps that you need to follow. First, you need to connect your iDevice to your Windows PC and then follow the steps mentioned below.

Step 1

First, you need to disable your security software which is running on your computer. Next, you need to search for the ‘hosts’ file. Navigate to ‘C: WindowsSystem.32driversetc’

Step 2

Now, you might need to click on the ‘All Files’ option. Now, you will be able to see the ‘host’ files. 

Step 3

Now, drag the host files on the desktop.  

Step 4

Next, open the iTunes application and proceed with the restore. Now, once the restore procedure completes, you need to put the host files back to its original location. 

Step 5

Once you are done with the steps mentioned above, switch the antivirus back on.

[Note:- This is a complicated process and if you are trying it for the first time, you should take extra care]

Finally, reboot your system and check if the error code still persists or not. If yes, then move to the next solution.

As mentioned, this method is a bit complicated and if you are not too sure about trying this fix on your own, then you can always connect with a tech expert for professional guidance.

Solution 3- Put iPad in the DFU Mode

So you have already applied the above two solutions and none of them worked for you, right? Do not worry, here we are with another effective solution for you. Several users reported that they face the issue and once they put the iPad in the DFU mode, they can fix the issue on their own. So, if none of the above two fixes worked for you, we suggest you apply this solution.

In order to put your iPad in the DFU mode, first, you need to connect the iPad with a computer via a USB cable and launch the iTunes.

Next, you should press and hold the Sleep button along with the Power button.

Next, release the Sleep button. After that, a message ‘iTunes has detected an iPad in recovery mode’ will appear on the screen.

Now, the iPad will enter into the DFU mode. Now, iTunes will guide you through the restoration of your iDevice. Just follow the instructions appearing on your iTunes, and restore the iPad in the DFU mode.

As you are restoring your iPad in DFU mode, the error 1671 will hopefully not irritate you anymore.

That’s it! We hope with the help of the above solutions you can fix the iPad error 1671 on your own. However, if any of the solutions appear too complicated or you want to avoid the hassles of resolving a tech issue by yourself, then you can consult with an expert to get the permanent solution for this error.


How to Fix iPad Error 9?

Despite having all good features, still you can encounter many errors. One such unique problem about which there will be a discussion in this article is the “iPad error 9”. Basically, this error can come up when you attempt to restore or update the iTunes software. The error message that can come up, when this issue occurs is ‘The iPad “iPad” could not be restored. An unknown error occurred (9).”

There can be various reasons for the occurence of this issue. Some of the most common reasons are that if the iTunes application is up to date, then there is a possibility for you to encounter this problem.

Also, if the USB cable or port has any damage of any sort, then you can get this problem. Further, if the security software blocks the communication with the update server, then this issue can crop up and etc.

Possible Effective Methods to Rectify iPad Error 9

This article will provide you with various methods that will certainly help you to remove this problem in an easy way.

Procedure to Update the iTunes Application

If the iTunes application is not up to date, then there is a possibility for you to encounter this problem. Now, the best and simple answer to resolve this problem is to perform an update for the iTunes software. In order to do so, follow the below steps:

  • First, open the computer and then double-tap on the ‘iTunes’ application logo.
  • When a new window opens up, with the name ‘iTunes’, then go to the menu bar, located at the top of the window.
  • After that, from the menu bar, choose the ‘Help’ item. As soon as you click on that option, then a drop-down list will appear.
  • Now, from that list, locate and then, select the ‘Check for Updates’ option.
  • At this moment, the iTunes application will begin to search for updates. Next, follow the information on the application window and update the iTunes software accordingly.
  • Once the update of the iTunes application is complete, then close and start the software once again.
  • Lastly, attempt to update the iPad device and see if this error comes up or not.

Set Up the iPad Device Once Again

When you get the error 9 on the iPad device, then it can be due to some kind of internal glitch. Now, to solve this issue from ever occurring, all you need is to reset the iPad device. Here are the steps on how to perform it:

  • First, unlock the iPad, then locate and tap on the ‘Settings’ application.
  • Once the ‘Settings’ application opens up, then navigate and choose the ‘General’ option.
  • When a new page that has a name ‘General’ comes up, then find and then select the ‘Reset’ option.
  • Now, when another new page within the ‘Settings’ application, that has a name ‘Reset’ comes up. At this moment, choose the ‘Erase All Content and Settings’ option.
  • Next, there will be a prompt to enter the pass code. When the passcode is provided, then a Warning box will appear at the bottom of the screen, that says ‘Erase iPad’ written in red color. To remove all the contents of the iPad, choose that red button. 
  • Now, there will be a prompt to input the ‘Apple ID password’, once this is done, then the iPad will clean all its data from the storage.
  • After the cleaning process is complete, then the iPad will start up with the initial setup screen.
  • Finally, when the iPad device is set up according to your preference, then see if this error comes up or not.

Inspect the Security Application 

When the security software present within the iPad device is unable to communicate properly with the update server of Apple, then there is a possibility for you to encounter this issue. The best way to resolve this problem from occurring is in the following:

  • First, check if the iPad device can be identified by the iTunes application or not.
  • Then, examine the settings of the security software and after that, be sure to see that the connection to the Apple Server is active.
  • Next, check the time, date and the location of the computer, where the iPad is connected to. If they are not properly set then be sure to do that correctly.
  • Perform an update of the security software on the computer
  • Also, update the Windows Operating System and the iTunes software.

Examine the USB Port and Cable

Sometimes, due to a faulty USB cable and the ports, you might face the error 9 for the iPad 2 tablet. The best way to get rid of this problem is to perform a proper inspection of the USB cable and the port. To do that, follow the steps underneath:

  • First, take the USB cable that came with the iPad device and then, look for any physical damage on the outer casing.
  • Now, if there is any kind of puncture or slashing on the cable. Then, do replace that wire with a new one.
  • If there is no physical damage on the cable and still, this error pops up, then inspect the USB port of the computer. Upon checking the port if there is some dust or foreign particles present inside it, then clean them using a lint-free cloth.
  • Next, after cleaning of dust is complete, then connect the iPad on that USB port, if it works then OK. But, if the device cannot be connected, then try to insert the iPad on other USB ports present on the computer.
  • Sometimes, if the lightning connector pin gets bent or has any scratches on it, then this error can come up. So, to get a  permanent fix you need to replace the lightning cable or the port.
  • If the USB connector is not so snugly inserted on the computer’s USB port. Then, also you can get this error. Now, the easy solution to eradicate this issue is to connect the USB cable to the port very securely.

To Conclude

The iPad 2 error 9 can be resolved easily if you follow all the methods on the previous section carefully and minutely. But, even after following all the steps in the last section, still, if you cannot able to resolve this issue at all. Then, do not worry a bit.

Just, provide all the details of your query on the comment section below this article. Then, get an easy fix from an expert.


How To Perform A Factory Reset iPad: Get Effective Hacks On Your Fingertips

Over time, due to certain situations, users require to factory reset their iPad. However, there are other circumstances where you need to factory reset the iPad which includes when the iDevice freeze up or if it doesn’t work as it should. Besides, if the iPad restarts frequently without a specific reason, then there is also a requirement to reset the device. Apart from these, when users want to eliminate all the personal data present on the iPad, you can perform this task.

So, if you have also come across this above situations and wondering “How to factory reset iPad?” then you have hit the right page. Here, in this article, we will be going to discuss all the necessary steps that you need to perform for resetting your iDevice.

How to Factory Reset iPad?

Before performing the factory reset, it is essential to back up all the important data and files present within your iDevice. To do so, follow the steps underneath:

Steps to Backup Data and Important Files:

  • At first, connect the iPad to the USB port to your computer. Now, check whether the iTunes application automatically comes up or not. If the iTunes application doesn’t pop up automatically, then you have to tap on the icon of the iTunes on the device to launch it.
  • Once the iTunes application opens, click on the icon Device that located just beneath the menu bar section. Now, you need to navigate to the Settings section and tap on the “Summary” button which is present on the Settings window.
  • After that, select the option “Backups” and confirm the process by tapping on the OK button twice. Then, choose the option My Computer that is present on the same window. Next, go to the right side and locate the option “Back Up Now.” Once you locate this option, click on it to starts the backup process.

In this way, you can easily backup all the important data and files. Now let’s have a look at the next section, where you get to know how to reset the iPad.

Steps to Perform Factory Reset of iPad:

  • Primarily, press the “Volume Down” button and “Home” button altogether and keep pressing those buttons for a few sections unless the Apple logo appears on the screen.
  • This indicates that the iPad’s reset process ie over. Finally, when your iDevice boots up, you will find that all the setting have been modified to factory specifications. But, you need to keep in mind that all the data will remain unchanged.

This is the most basic way to factory reset the iPad. But there are some other ways as well. So, if you are no able to perform the above process, then you can do the following:

Use the Third Part Program to Reset the iPad

Here, in this section, you will get to know the complete steps of how to reset the iPad using a third-party program. To do this process, follow the under mentioned steps:

Step 1: At first, launch a web browser and look for a reliable third-party program which will assist you t do a hard reset on iPad. After that, from the output of this search, select a particular program and then download it.

Step 2: Once you download the third party program, execute the setup file of the program that you have downloaded recently. Now, follow the further guidelines on the setup screen and install the program accordingly into your device. Then, tap on the icon of this program to invoke it.

Step 3: Now, on the first windows of this program, select the “Erase” option from the menu list. At this moment, the program will search for the iDevice. When it locates the iDevice, you will find another page where you see five options “Erase Deleted Files”, “Erase All Data”, “Erase Private Data” “iOS Optimizer” and “Space Saver”

Step 4: Out of these options, choose the single option “Erase All Data.” Once you perform this action, a confirmation window will pop up. In this page, have a look at the provided information and hit the Erase option. 

Step 5: Now, you will find a confirmation window that appears on the screen. Next, select the “Erase Now” button from the resultant menu list to eliminate everything from the iPad. Once the process is over, reboot the iPad.

Use the iTunes to Factory Reset iPad

To perform a factory reset of the iPad with the help of the iTunes application, you can follow the under mentioned steps:

Step 1: At the beginning, launch the iTunes application. Then, connect your iPad to the USB port of the computer and press and hold the “Volume Down” button along with the “Home” button simultaneously.

Step 2: Next you require to press these two buttons for a few seconds until you will find the iPad boost up in Recovery Mode. Now, in the iTunes application window, you will notice an option “Restore Or Update”  that appears on the screen. Simply hit the Restore button. 

This process will take a few minutes to finish. So, be patient and don’t interrupt the process until it is completed. iTunes will install the current version of iOS on your iPad. Moreover, it also installs the required software on the device.

Use the iCloud Application to Factory Reset the iPad

This is another effective way by which you can reset your iPad device. To perform this action, you can go through the steps below:

Step 1: First of all, invoke a web browser on your device and go to the official website of iCloud. Here, enter all the necessary credentials within the web site to get into your account. Next, you require to enter the “Apple ID” and “Passcode” on the specific space and log into it.

Step 2: When your account displays up, locate and choose the feature known as “Find My iPad.” Next, look for the option “All Devices.” After that, click on your iPad that is located on the right corner of the website. Then, find and select the option “Erase iPad” from the resultant menu list. Once you perform all the above steps, the resetting process of the iPad will start.


By using the above methods, you will be able to perform the factory reset process of iPad. But, if you face any difficulties, then nothing to get worried. Simply write up details of the problems that you are facing while performing the methods on the comment section below. On the other hand, you can also get in touch with expert technicians for instant help.


Amazing Ways To Transfer Files From PC To iPad

iPad users generally want to transfer files from PC to iPad in order to secure them. In case, if the files are deleted accidentally, then the files cannot be retrieved. 

Sometimes, if the hard disc crashes then you may also lose all your data that have been stored in the PC. So, to prevent such a situation need to back up your files. Hence, transferring the data from your PC to iPad is the best option.

There are times when you may face up with a certain problem while transferring the files. But, there is nothing to worry about it as we are here to help you out. Go through the article to know the methods that will actually work out.

Simple Methods to Transfer Files from PC to iPad:

If you want to learn how to transfer files to iPad then here it is. We are going to provide some of the easy methods which can help you to transfer the files from the system to iPad. So, let’s have a look below:

Method 1 – By Using iTunes

This is one of the most effective methods that you can use to transfer the files to iPad. iTunes is an indispensable tool for backing up iOS devices and synchronizing data. By using iTunes you can quickly transfer the file to your iPad. Now follow the steps:

  1. At first, connect the iPad to the system by using the USB cable.
  2. Next, launch the iTunes application on the system.
  3. When the iTunes window opens, select the Device icon which is present at the upper left side corner. Now, you will find the File Sharing button, click on it. 
  4. Then, select the Apps that you want and then click on the Add file button. After that, go to the file folder location and choose the file that you want to add to the iPad.
  5. Next, select the Sync button which will make iTunes synchronize the files to iPad. Now, choose the category in which you want to transfer files. 
  6. Once the process is done, check if the files are transferred to the iPad.

Method 2 – By Using the iCloud Drive

With the help of the iCloud drive, you need to transfer files to iPad. If you do not know how can you do that follow the steps which are instructed below:

  1. Firstly, launch the iCloud Drive on the system. 
  2. Share the file to the iPad, drag the file that you want to transfer to the iCloud Driver folder. Now, you can easily access the file on your iPad. 
  3. Install the iCloud Drive on the iPad and then log in to your iCloud account. Now, you can open the file that you need.

Method 3 – Using Email to Share Files

An alternative method that you can try out is by using an Email. You can also transfer the files to the iPad by sending yourself an email. To do that follow the steps:

  1. Open your Email account on the system.
  2. Then, go to the Compose icon and type your email id. After that, select the Attach button. 
  3. Next, choose the file that you want to transfer. 
  4. Then, select the Send button. After doing this, open your Email account on the iPad and download the attached files. Now, you can easily access that file on your iPad.

Method 4 – By using the Dropbox

By using the Dropbox you can also transfer the files from PC to iPad. If you do not know how you can you do that then follow the steps:

  1. Open the Dropbox on your computer.
  2. Next, drag the file that you want to transfer to the Dropbox folder. 
  3. Once you are done, install the Dropbox application on the iPad and then open it.
  4. In the Dropbox, you will get the file that you have transferred from the PC. Now, you will be able to access that file on your iPad.

Hope, this article will definitely help you to transfer files from PC to iPad. Follow the methods with the steps accurately on your iPad to transfer the file. With these methods, you can quickly transfer the file to the iPad. If you face any problem, then you can leave a comment in the comment section below. 


Troubleshoot iPad Activation Error

This article here is going to help you fix the iPad activation error. This error that we are discussing here in this article is one of those issues. And since this is one of the errors related to activation, this can be really problematic if it happens.

But the good news is that, with the instructions that we have given here in this article. You will be able to resolve this issue without any kind of problem whatsoever.

And you will not have to go and get tech support services right away.

So, let us go through this article and see how we can solve this problem in the most efficient manner.

Probable Causes of the iPad Activation Error 

Before we go ahead and take a look at how we will be able to fix the iPad 2 activation error. It is important to have a good and sound understanding of why this issue is occurring in the first place. This is because that is going to give you 2 very effective benefits in trying to resolve this issue.

The first among that is that you will be able to avoid a lot of the different technical glitches. The ones that might have come your way if you did not know what the issue is and why it is occurring.

And the other one is that if you have a good knowledge of the problem. Then, it is going to be very easy for you to understand all the technicalities of the instructions. And with that, you will be able to carry out the instructions in a much easier manner.

In this section of the article we are going to cover just that, so read carefully.

The first thing that comes to mind when talking of this particular activation error issue is the system overload issue. This is especially the case if you happen to have an older model of iPad which you have used quite a bit.

And because of that, you will get this particular problem for which you will not be able to activate the iPad.

Then, there is the issue of a poor internet connection, which is the case for the most part. And that also is going to cause this particular error by starting the iPad for you to use.

Apple has this thing called iCloud which is not only a very useful tool but is also very secure. A big reason for that security is the Activation lock feature. This plays a big part in making iCloud one of the most secure services.

So with this, we have covered all the possible reasons for the iPad activation error.

How to Fix the iPad Activation Error?

Now, in this section of the article, we are going to show you the different ways to solve this problem.

What we recommend is that you identify what the exact causes of this particular issue are in your case. That way, you will be able to go and apply the solution to this problem right away. As we have covered all the different solutions that are there.

But, if you do not have that information at hand, then there is no problem. What you will have to do in that case is just keep applying these steps one after another. That is going to do the trick for you and is going to fix this problem once and for all.

Disable the iCloud Activation Lock 

The iCloud activation lock although a very useful tool can still cause problems for you and that is going to cause trouble.

So, to avoid that in your system for which you will not be able to start the iPad. You will have to deactivate the Activation lock feature if you want to solve this problem.

Here are the steps that you will have to take to make this happen:

  1. Switch off the iCloud account that you are currently using and after that, visit 
  2. When you are there on the website, use the Apple ID you have to sign into that account. 
  3. Now, go to the Find my iPhone option and after that, click on the Confirm your password option. 
  4. Then click on the Select all Devices option and then Select the device that can’t be activated
  5. Finally, look for the Choose Remove from Account option to remove the account activation lock. 
  6. After you have done all of that, just switch on your iPad and after that, start it all over again. 

This is going to remove the activation error that you were facing with your iPad.

Use iTunes to Enable the iPad all over Again 

For a problem like this, the iTunes software can be just the thing which you are going to need. In order to use iTunes to get your iPad working again. Here are all the steps that you will need to make use of:

  1. For the first step, you will have to reboot your iPad while you have connected it to the iTunes platform. You can use a USB cable to make that happen. 
  2. Now, from the list of devices that are going to come up on the screen, look for your device. 
  3. You are going to find the Activate your iPad option next to the device name. Click on it to start the process. 
  4. In the next window, you will have to log in and for that. You will have to enter your Apple ID. 
  5. Finally, look for the Continue button and click on it to finish this process. 

So, this is the process for using iTunes to solve this problem. This is going to solve the problem very likely, but if it does not, then do not worry. Go to the next step on this list.

Diagnose the Condition of the Internet Connection 

For proper activation of the iPad, one of the most vital things is a reliable internet connection. This is also the case for most other devices, but is very much the case for iPads.

This is because of the fact that iOS devices keep getting updates all the time. That is what makes them some of the best in the market. But if the internet connection is poor.

Then what happens is that the download does not happen in the proper way. As a result of that, a lot of corrupt files come about which can cause the iPad activation error.

Sometimes, that is going to be totally direct, and other times, it is going to come from problems elsewhere.

Then again, for the proper synchronization of the software, a solid internet connection is a very important thing. Without that, the connections are not going to work in the proper way.

So, you should check the status and the strength of the internet connection. And if you find that the condition of the signal is not good. Then, what you can do is to get in touch with your internet service provider.

They are going to make sure to fix the internet connection that you are using and with that. You will no longer face this particular activation error from your iPad.

Change the iOS Developer Versions 

The iOS platform is always in a state of evolution and because of that updates are always around the corner.

But the problem occurs when you get an update and that is not compatible. If that happens then you will face problems like this and thus will not be able to use your iPad.

Now, if you want to resolve the issue in this way, then you will have to roll back those updates. And when you do that, then that is going to fix this issue. 

A simple way of doing that is to start deleting all the update files one by one. When you do that, you will have to reboot your iPad in order to implement all the changes that you have made. 

Thus, that is going to fix your problem once and for all. 

Do a Hard Reset 

The last method you can go for if all else fails is a hard reset. If for any reason you can not pinpoint what the exact problem is in your case. 

Then a hard reset is going to help you work around that in a very easy fashion. But, one thing you will have to do is to have a proper backup of all the data that is there. 

And once you have that you can start with the process of performing a hard reset. 

The Conclusion 

This completes our list of solutions for the iPad activation error problem. 

If none of these methods here bring you any solution, then we recommend you get the help of expert professionals. 

Something that you are going to get once you call and sign up for tech support services. So, if that is what you need, do not hesitate from using it. 

As that is going to save you a lot of time and other resources which you might have lost out on otherwise.


Get the Solutions for iPad Error 3194

Normally, upgrading your iPad to the latest iOS version or restoring it from backup, is a pretty smooth process. Just by following a few steps your device will be up and running. But in some cases, you may encounter the iPad error 3194 in iTunes. 

As the error code occurs, you won’t be able to restore or update your iPad. However, you need to redo the process. In case the error code still occurs, then you need to fix it with our step by step guide. Moreover, this error is also seen in the iTunes application.

Therefore, you can follow this article to the end in order to know all the methods to fix the issue. Additionally, we will also study the causes that will lead to the occurrence of this issue. Hence, you can proceed to the next section of the article below.

General Causes that Lead to the Error Code 3194

Before you try to jump to the solution part of the article, it is important to know the causes of the issue. By doing this, you will be able to fix the issue in an efficient way. Therefore, you can now follow the causes that we are going to discuss below:

  1. In case the Apple servers are down, then you can be interrupted with this error code.
  2. Also, if the iTunes application is out of date, then also you can get this error code.
  3. In addition to that, if the iTunes application is somehow corrupted due to virus attack, then also the issue can occur.
  4. If the hosts file of the system is incorrect or corrupt, then also the issue can occur.
  5. Incorrect internet connection settings can also lead to the error code.
  6. Using the jailbroken device for updating or restoring can also lead to the issue.
  7. If the Windows Firewall restricts the iTunes to function then also the issue can occur.

Therefore, these are the causes that you must know in order to fix the issue easily. Henceforth, you can move to the solution part of the article.

Simple Methods to Fix the iTunes/iPad Restore Error 3194

In this section of the article, you will get all the error fixing methods to resolve the issue. Here, you want you to follow all the given steps of the method in order to get the issue resolved in the simplest way. Hence, proceed to the following section to get hold of the methods:

Method 1: Try to Check the Hosts File

Here, you can try to edit the hosts file. By doing this you will be able to fix the issue easily. However, this method is fairly a complicated one and requires your full attention. Hence, you are not tech savvy enough to perform this method, then follow the steps that we have provided for you.

For the users, we have explained this method into two parts. One for the Windows users and the other for Mac users:

Part 1: For Windows Users

  • First of all, close the iTunes application completely. 
  • Now, proceed to the following path: C:/ Windows/ System32/ drivers/ etc/.
  • On arriving here, double-click on the hosts file in order to open it in Notepad.
  • Next, you have to look for 208.105.171 at the bottom.
  • On finding it, enter # in front of the line.
  • In case you cannot find the address, then you have to enter #208.105.171
  • Then, click on the File menu and then click on the Save option from the list.
  • Close the Notepad and then, reconnect your iPad to the system to check if the issue occurs or not.

Part 2: For Mac users

  • In the Finder section, select the Applications option.
  • After that, click on the Utilities option. Then you have to open the Terminal.
  • Now, type the command “sudo nano /private/etc/hosts” and then, press the Return key.
  • If prompted, enter your Mac system password and then again hit the Return key.
  • Now the hosts file will be displayed on your screen. Next, look for “” entry.
  • On finding the entry, enter # with a space in front of the entry.
  • Finally, to save the changes, press the Control key and the O key at the same time.
  • After that, press the Return key and then press the Control key and the X key at the same time. This will close the Terminal.
  • Now, restart your Mac system and then connect your iPad to Mac in order to check for the issue.

We expect that you will resolve the issue on your own. In case the issue still persists, then proceed to the next section.

Method 2: Update the iTunes application to its latest version

Updating the iTunes application to its latest version can help you to fix the issue instantly. Hence, it is advisable to perform this method right away. Therefore, the steps of the procedure are mentioned as follows:

  • At first, open the iTunes applications on your system (both Windows and Mac users can follow these steps).
  • As the iTunes application opens, click on the Help tab on the top menu bar.
  • After that, click on the Check for updates option from the drop-down list.
  • Now, allow the iTunes application to check and automatically download the latest updates.
  • As the update downloads, iTunes will automatically install them. However, you have to wait as this process takes a lot of time.
  • Once done, restart the system. As the system reboots, check if the error code still occurs or not.

So, this is how updating the iTunes application will help you to fix the issue easily. For other fixing methods proceed to the next part.

Method 3: Allow the iTunes application through the Windows Firewall

Allowing the iTunes application through the Windows Firewall will help you to resolve the issue easily. Hence, you can perform the method with the help of the steps below:

  • First of all, open the Control Panel from the Start menu.
  • Inside the Control Panel window, navigate to System and Security section.
  • In the next step, search for the term Allow a Program through Windows Firewall.
  • After that, click on the Allow another program option.
  • Now, locate the iTunes application and then click on it to add on the whitelisted programs list.
  • Close all the windows and then check if the iTunes error code persists or not.

We hope you will fix the issue on your own with the steps above. However, follow the next part of the article in order to avail other methods.

Method 4: Disable the Windows Firewall

In case the previous method does not resolve the issue then you can disable the Windows Firewall. This will allow the iTunes application to run freely. Hence, the steps that you can follow are mentioned below:

  • Open the Run box by using the Windows logo key and the “R” keys simultaneously.
  • Now type “Control Panel” in the Run box and then hit the Enter key. This action will open up the Control Panel window.
  • Now locate and choose the System and Security section.
  • In the next step click on the Windows Defender Firewall option.
  • After that, navigate to the left pane and then click on the Turn Windows Defender Firewall on or off option.
  • In the next step, click on the Turn off Windows Defender Firewall (not recommended) check box. This checkbox will be available under both the Private network settings and Public network settings sections.
  • Finally, click on the OK button and then restart your system.
  • As the system reboots, you can proceed to check if the error code still shows up or not.

So, this is how you can disable the Windows Firewall in order to fix the error code. In case you want to follow other methods then move to the next section.

Method 5: Remotely Reset the iPad

In order to get rid of the issue, you can try to remotely reset the iPad device. Therefore, to learn the steps of the procedure, you can follow up on the following section:

  • Open any web browser on your system and the open the iCloud website.
  • After that, use your Apple ID and password to log into the iCloud website.
  • Now, open the Find My iPhone service in iCloud. Then click on the Al Device option and then select your iPad device.
  • In the next step, click on the Erase button in the iOS device’s card and then confirm the action.
  • Once done, the Ipad will start to reset.
  • Finally, connect the iPad to the system to check if the error code still occurs or not.

Hopefully, now you will be able to fix the iPad error code on your own.

Signing Off

So, these are the methods that you can try out in order to troubleshoot the iPad error 3194 instantly. Moreover, these methods which we have provided are best in class. Also, these methods deliver the solution right away. Hence, we expect that you will not face any issue with these methods, However, if the issue occurs, then you can get back to us through the comments section below. Thus, we will get the help of the professionals.