Category Archives: Fix Apple Mac Errors

Contact Apple Technical Support Number Now:

03Jan/20
Fix Mac Error Code 8076

Fix Mac Error Code 8076 With Some Effective Steps

Mac Error Code 8076 is one of the error codes that usually occurs when the user tries to move certain files from the primary drive to another one. This error basically strikes with a complicated notice that says “Operation can’t be completed due to an unexpected error”. This error code when occurs, it blocks the user permission to access the remaining files which are annoying enough. Several users fail to crack this issue but finally, we have the grand solutions to solve this error code. So, if you want the effective solutions to fix the issue, then you have definitely come to the right spot. In this content, we will share all the probable causes and top-notch solutions to settle this issue as fast as possible.

Probable Causes Why Mac Error Code 8076 Occurs?

If you are a victim of Mac Error Code 8076 on your device, then there might be several reasons behind this error code. This error mainly arises if you mistakenly deleted an important file from the Mac device or the files go corrupted. Sometimes, if the Read/write operations go corrupted, then it will also cause error code -8076 in your system. Improper installation of the software which interfaces with each other is another prime suspect for this issue. However, you can easily terminate this issue by implementing some of the effective steps that we will discuss in the next segment.

Proven Methods to Fix Mac Error Code 8076:

We have arranged a few effective methods to eliminate Mac error code 8076 in no time. You can go through either one of these methods or all the solutions until you have the problem solved.

Method 1: Perform the Disk Utility Test on your Mac

Perform the Disk Utility Test on your Mac

Disk-Utility is an in-built feature that allows the computer to detect and eliminate all the issues automatically. You need to perform this method with the steps below to settle this error code.

  1. At first, turn on your Mac and navigate to the Disk Utility menu from the Search panel.
  2. Search for the First Aid button from the list and click on that option to open the action.
  3. Now, select the Run button and click on that to begin the Troubleshoot.
  4. After the scan gets completed, you can see all the affected files in the list. Select all the file and click on the Repair/Delete option on the bottom of the screen.
  5. Select the Delete key and tap on the Confirm button to erase the files permanently.

After successfully completing all the above steps, restart the device and check if the issue is fixed or not. If the method doesn’t work, try another solution below.

Method 2: Enter the Mac Recovery Mode to Fix this Issue

Enter the Mac Recovery Mode to Fix this Issue

Recovery mode is another way to detect and solve the issue which is also an in-built feature in Mac. Go through the steps below to accomplish the task.

  1. First of all, turn on the Mac device and when the Apple logo appears, enter the Recovery Mode.
  2. Next, choose the Utility option from the Search list. Then, you can see a Terminal option on the Menu Bar.
  3. Hit the button to open the action and simply type Reset Password in the command box.
  4. Tap the Enter key and you will be presented with Reset Password window on your screen.
  5. Select the OS Drive from the Drop-down and select the User Account that you want to reset the password for.
  6. Select the Startup Volume if it is not selected. Then, choose the Username under the Account Selection settings.
  7. Go to the Reset home directory option and tap on the Reset button to change the Password.

After completing all the steps, restart the Mac and see if the error code is resolved. If still, the issue continues, try another solution below.

Method 3: Do a Software Update on your Mac

Do a Software Update on your Mac

If your system software is going outdated with the software version, you might trigger the error code -8076 on your device. Hence, go through the steps below to update the software.

  1. At first, turn on your computer and navigate to the Apple menu from the left-top corner of the window.
  2. Select the Software Update option from the bottom of the results. Now, click on that to verify if there any available software to update for your device.
  3. Once the Mac detects any newer version to update, click on that application file and select Install.
  4. Install the software application manually on your Mac and watch the on-screen instructions to complete the process.
  5. Do the same process for all the application files and restart the device later the installation completes.

Now, check if the error code -8076 is resolved, then you easily access all of your files. If the issue still persists, try another solution below.

Conclusion

We have discussed all the possible methods to fix Mac error code 8076 in the easiest way. You can go through either one of these solutions or all the solutions until you have the problem fixed. Hope the above article was beneficial enough to guide you on how to handle this error code. In case, the error still persists and you are unable to access the files, positively you can take technical support for further assistance. Lastly, we recommend you to submit your valuable feedback below in the comment box and let us know about your experience.

27Dec/19

A Complete Guide for Mac Error Code 8058

The error code -8058 is one of the alerts which the system flashes to inform the Mac user regarding the problem. Yes, each error code indicates different problems in the system of different elements. The Mac devices, too, similar to the regular brands, are vulnerable to damage either with time or manhandling. This article attempts to focus on the indication of the Mac error code 8058 and the solutions to resolve it. However, make sure to stick through and note down the ways to remove the annoying problem with convenience.

Know More About the Error Code 8058 on Mac:

Apple devices define minimalism and therefore sophistication. Keeping the essentials intact, the devices maintain the status with premium features. But, even if they belong to a reputed brand, the devices are vulnerable to damage and malfunctioning. The problem lies in a certain section in the system. When you attempt to copy some files and then try to paste them directly on the desktop, the Mac error code 8058 arises. This message states that the operation is incomplete due to the presence of an unexpected error. Also, the users notice this error code while replicating files to the Download folder from the Store. This triggers the issue to manifest on the screen of the system and trouble the users. However, let us now discuss the various symptoms which the Mac error code 8058 gives off.

Symptoms of the Error Code 8058 on Mac:

All system errors tend to manifest some kind of symptoms which confuse the users and make them resort to solutions to fix them. The symptoms are the repercussions of the problems that arise due to certain malfunctions. However, underlying are some practical symptoms which the Mac error code 8058 triggers the system to manifest. Read along in order to determine the error so that you can identify it properly and treat it comprehensively.

  1. The Mac system turns slow and the behavior of the system is sluggish.
  2. The stored Mac file turns corrupt that too without any warning.
  3. The installed programs tend to crash due to this issue.
  4. For some time, the Mac freezes frequently.
  5. An error notification appears before the user on the screen stating “Unable to find the .dmg file”.
  6. The Mac screen also projects the error message saying “File not Found”.

These are the major symptoms which the Mac error code 8058 projects. And it is for the users to detect the error easily. However, the knowledge of such an error is not just limited to this. The users must know the causes regarding the issue. For that, proceed to read the following section which deals with that thoroughly.

Probable Causes for the Mac Error Code -8058 to Appear:

As you know, every error in a system does not manifest for no reason. There must be some cause behind it for the projection of such an annoying error. The error code -8058 in Mac can appear due to numerous reasons. Some of them are discussed below.

  1. At times, the accidental deletion, as well as the formatting files, tend to trigger this error to appear.
  2. Also, the problem manifests when the user attempts to empty the Trash files that too without cross-checking them.
  3. The corruption or deletion of the Mac files can lead to the birth of the Mac error 8058.
  4. Malware invasion can also potentially lead to this annoying problem that flashes continuously before the user on-screen.
  5. At times, the header files go corrupt which lead to the problem and so does the improper installation of some programs.

So, sum up the probable causes for the contribution to the error code -8058 to surface. However, let us now proceed to the successive section which holds a dedicated discussion of the solutions to fix the error code.

Quick and Easy Steps to Fix the Mac Error Code -8058:

Quick and Easy Steps to Fix the Mac Error Code -8058:

The error code -8058 can easily be treated with simple steps. All of them are stated underneath. Make sure to go through the dedicated procedure in order to troubleshoot the error entirely. Besides, an error can create plenty of barriers which may lead to halting the regular tasks that the users undertake in order to complete their assignments. However, to avoid such frustrating hindrances, make sure to obey the following which aims to manifest the Mac error code 8058. Now, stick through and note down the essential steps by which you can troubleshoot the frustration hovering in your minds.

  1. To begin with, head to the Finder.
  2. Then, press down the Option button present on the keyboard.
  3. After that, proceed to tap on the Go menu.
  4. Then, move on to select the Library after which you must select the folder which says Preferences.
  5. There, head over in order to select the com.apple.finder.plist. File. Then, place this folder or file in the Trash.
  6. Finally, Sign out of the Mac device after which you must Log in once again.

Now, the users won’t receive the Mac error code 8058 present on the Mac device. This procedure is actually very effective in treating the complication. Also, users all over the world have found satisfaction in troubleshooting the error successfully.

In this way, the annoying and frustrating errors can find release and the problems tend to disappear only with effective solutions. However, in case, the issue persists, consult immediate expert service which can repair the entire problem seamlessly. But, it is a common recommendation to make an attempt to troubleshoot the Mac error code 8058 issue on your own. Therefore, hands-on experience is essential in order to know the functionality as well as the treatment of certain complications that the system tries to manifest. Now, you can enjoy the Mac device to the utmost without any potential hindrances. Thus, even the most sophisticated device, like the Mac tends to ‘stagger’.

03Jun/19

How to Fix App won’t Open on Mac?

App won’t open on Mac is one such issue that is a very common glitch for the Mac users. The device without any prior notice fails to execute the commands. The application on the Mac device won’t open even after following the accurate process. By any chance, if you are also encountering the same issue, then you have to resolve it at the earliest possible. Keeping that in mind, here, we are going to discuss the method that will surely help you to get rid of the error at the instant. Thus, try each and every process and check which one is perfect for you.

Reasons Responsible for App won’t Open on Mac

If you go through this article you will be able to know that there are multiple reasons that are responsible for this particular issue. If you want to experience an error-free device then know the causes and solve the issue as soon as possible. Have a look at the causes and know more about it.

  • If you are using an outdated version of the Operating System, then it may crash with the device and won’t allow opening any application as well.
  • Due to an unstable or poor internet connection, some application may not open on your Mac device as well.
  • In case, if that particular application gets outdated, then it also creates the same issue. So, it is highly recommended to use the latest version of the applications.
  • If your device contains too many applications, then it can restrict you from opening those on your device and leave you puzzled.

Additional Information

Before going to the methods you should remember some basic things in your mind. However, you have to perform the preliminary troubleshooting as well. So let’s start:

  • Do not forget to restart your Mac device more than once and check if the issue gets solved.
  • You may use another browser and check the faulty area.
  • Disabling all the extensions can sometimes solve the issue.
  • Check that you are using the latest version of the application and also verify whether the app is compatible with your Mac or not.

Reliable Methods to Fix App won’t Open on Mac

Do not get perplexed if you are encountering the same issue with your Mac. You can easily get rid of the error by following the solutions that we are going to provide in this segment. Have a look at the methods and execute them exactly the same as stated.

Solution 1: Clear Caches and Cookies

By any chance, if the browser gets overloaded with cookies and caches, then it is quite possible that you may face the same issue. So, as soon as possible you need to clear out the caches and cookies.

  1. The very first thing you have to do is to launch a Finder window from your device.
  2. After that, navigate to the “Go to Folder” option and click on it.
  3. Now, click on the search box and type “~/Library/Caches~” in it.
  4. Then, tap on the Enter button form the keyboard. It will help you to proceed with this folder.
  5. Now, check the small boxes of each folder and clean out everything.
  6. After that, you have to repeat the same method as stated above. But, change the subtitle as: /Library/Caches.
  7. Be sure that, when you complete the cleaning method, you can’t restore them as well.
  8. At the final step tap on the Empty icon and keep waiting for a while.
  9. Now, check if the application won’t open Mac issue gets resolved or still showing up on the screen.

Solution 2: Turn off all Extensions

By any case, if you are encountering the issue after performing the first method, then go through this one to fix the issue. Thus, you have to disable the option manually by executing the steps.

The first thing you have to do is to open the Chrome and go to the User Data folder by clicking on it. Then, select “File preferences” folder. You can find this option under the Text Editor tab. Next, scroll down to the line which is starting from the Settings blocks. You need to block all the extensions in the settings by clicking on the options one by one. At the final step, verify whether you are still confronting the App won’t open on Mac or not.

Solution 3: Rectify the Compatibility Issue

In case, if the above methods are not sufficient to fix the issue, then you can go with this one. You have to check the compatibility of the applications that are installed in your device. To do the same, the first and foremost thing you have to do is to navigate to the Apple menu and click on it. After that, move to the “About This Mac” option. You can see whether the applications are compatible with the device or not. You have to delete the applications that are incompatible with your device.

Moreover, you have to check for old 32-bit applications on your device too. First of all, you need to start the Apple Menu and then navigate to the “About this Mac” option. After that, choose the System Report and scroll down until you see the list of applications. Now, choose the Applications icon. You can find this option under the Software section. Keep waiting for a few seconds to see the list of downloaded apps. Mark tick on the applications you want to remove. After deletion of the applications, check if you are still encountering the same or not.

To Conclude

Expectedly, you can definitely fix the “application not opening Mac” issue completely. But, in case, if you find any sort of difficulties while performing the steps you can post about it in the comment box below. Else you can seek an expert’s help as well.

27Apr/19

What to do when your Apple Music not Working on Mac?

The issue of Apple music not working on Mac is usually experienced by those users who sign up their Apple music using their iPad or iPhone and are surprised to notice Apple Music not opening in iTunes on their Mac device. And, this issue mostly occurs due to some checkboxes not being checked in iTunes preferences Menu on Mac. Besides, such kind of issue can also occur due to minor software glitches on Mac. Apart from these, there can be certain iTunes glitch that might prevent Apple Music from working on Mac. However, whatever be the causes, resolving such Apple Music related issue is always a great challenge for the users.

Well, if you are facing the same problem, then you have hit the right page to locate your answer. As this post will cover the aspects that required to overcome this Apple Music not working issue. There are eight extremely effective and reliable methods mentioned below that can leads you towards a quick fix.

Apple Music not Working on iTunes Mac: Steps and Procedure

Apple music not working on Mac is a quite annoying issue for the Mac users, but all the fixes for this issue are pretty simple to perform. You just ensure that you perform them in the same order as we have given and do not skip any step. So, let us begin:

Method 1: Restart iOS Device

Before performing any critical way, you can restart your iOS device (iPhone, iPad). As it is the most reliable way to fix such kind of Apple Music related issues. Hence, simply restart your iOS device and the Music application. Once you are done, simply swipe up on the Music application to close it. After performing this action, re-launch the Music app again and check whether the issue still remains or not.

Method 2: Reset Network

In order to resolve such kind of Apple music not working on Mac, you can reset the network. To do so, you need to follow the below steps:

  1. Firstly, you require to go to Settings.
  2. Then, click on the General.
  3. Next, hit the Reset button.
  4. Now, navigate to the Reset Network Settings option.
  5. This action will reset your network settings.

Once it is done, simply reboot your device and check whether the problem gets eliminated or not.

Method 3: Force Restart your Device

You can also resolve the Apple music not working on Mac by simply performing a force restart. And, you can do this by pressing and holding the Wake/Sleep + Home button, at the same time, until the Apple Logo comes up on the display screen.

Method 4: Sign Out and In iCloud Account

This can be another effective way that can resolve the Apple music not working on Mac. You can perform this by following the below steps:

At first, you have to turn to show off the Apple Music by tapping on the Settings button. After that, go to Music. Now, navigate to the Settings and then, sign out iCloud and sign in again.

Method 5: Update the iTunes to the Latest Version

After following all the above methods, if you are still stuck with the same issue, then you need to make sure that you are using the latest version of iTunes. If not, then you need to update the iTunes to the latest version.

Firstly, you have to open iTunes. Then, select the Help option that is at the top of the iTunes window. After that, hit the Check For Updates button. Now, follow the further on-screen prompts in order to install the latest version of iTunes.

If in the Help menu, you didn’t find the Check For Updates button, then you can download the iTunes from the Microsoft Store.

Method 6: Update the iDevice to the latest Version

To update your iDevice to the latest version, you need to plug your device into the power and then, connect it to the strong and stable internet connection. Once your device is connected to a strong and stable internet connection, simply go to the Settings and click on the General. Then, hit the Software Update button. Now, click on the ‘Download and Install’ button that pops up on the display screen. In case, if you find a message that asks you to remove certain applications from your device because your device requires more space to install the update. In such situations, hit the Cancel or Continue button. Next, press the Install button to update now. Here, you might be asked for the password. Now, follow the further guidelines in order to finish the process.

Method 7: Enable iCloud Music Library

With your subscription to Apple Music, you can access your music library on all of your devices which you have signed into with the similar Apple ID by turning on iCloud Music Library. Here, you require to ensure that you have signed in to your iDevice with the similar App ID that you use for Apple Music. After that, navigate to the Settings and then, select the Music. Lastly, click on the iCloud Music Library in order to toggle it On.

Method 8: Reset the Country/Region of iTunes & App Store

If you receive a prompts that says your Apple ID is only valid to us in the Country’s store, however, you are using the App/Tunes Store of another country, then all you need to do is reset the App/iTunes Store country to the one that your Apple ID is valid to use it. To do so, follow the below instructions:

  1. Primarily, go to the Settings and then, select the ‘iTunes & Apps’ Store.
  2. Now, click on the Apple ID and hit the View Apple ID option.
  3. Then, enter your Apple ID password (If prompted).
  4. Now, select the Country/Region.
  5. Next, click on the Country Or Region button.
  6. Here, you have to choose the Region or Country that your Apple ID is valid for use and hit Next and press the Agree button.
  7. Once you are done, follow the on-screen instructions in order to complete the further procedure.

Lastly

We sincerely hope this post will help you out in resolving the Apple music not working on Mac in a simple manner by following the above instructions. Let us know via your feedback about your experience with the above-mentioned methods, so that we can work towards improving them. Well, on the other hand, you always have the option to look up to the help provided by a professional.

27Apr/19

How to Fix the Problem of Airplay not Working on Mac

Airplay is a wireless communication technology introduced by Apple. If you need to mirror your Mac, iPhone or iPad to your TV or a wireless speaker, then you will need to access AirPlay. If you are facing any kinds of problem while streaming music and videos through AirPlay, then this guide is for you. Here in this article, we are going to discuss some of the efficient methods that can help you to fix your problem with AirPlay not working on Mac. Keep following the entire article to know the details on it.

Effective Solutions to Fix Apple AirPlay Not Working on Mac

Here, in this part of the article, we are going to discuss some easy fixes that can help you to resolve your problem with Apple AirPlay not working on Mac. Go through the part below to know the detailed solutions.

Solution 1: Check if your Apple TV is Awake or Not

To avoid the issue of AirPlay not working on Mac you should follow the steps which are discussed below.

Step 1

At first, you will need to be sure about that if your Apple TV is awakened or not. Then, restart your MacOS device. Here, are the steps that can help you to restart your Mac device.

  1. At first, you will need to press and hold the Power button or you can press the Control + Eject button from keyboard.
  2. Thereafter, a dialog box will appear on your device screen. Now, click on the Restart button.
  3. Then, select the Apple key and click to Restart.
  4. After that, press the Control+Command+Eject keys or you can press the Control+Command+Power button at the same time from your keyboard.

Step 2

Now, verify if your Mac iOS device supports the AirPlay or not. To check, follow these steps:

  1. At first, move to the Apple menu.
  2. Then, click on the System Preference option and click on the Display option.
  3. Now, the “Show mirroring options in the menu bar when available” option will appear on your screen. If this option is shown on your device screen, then this means your Mac device supports AirPlay.

Step 3

Once you are done with the above steps, now check if your Mac device is connected with the same network as the Apple TV or not. To check it, you will need to follow the steps below.

  1. At first, go to the settings option on your Mac device and select the Network option.
  2. Thereafter, move on to the menu bar and click on the Wi-Fi icon.
  3. Now, check if your network settings are exact or not.

Step 4

Now, this is the time to update your Apple TV.  If the steps are unknown to you then you may follow the steps below.

  1. First, go to the Settings menu and click on the System option.
  2. After that, click on the Software update option.
  3. Then, click on Update Software.
  4. Now, wait for a few minutes to complete the updating procedure.

After completing the updating procedure, you will need to check the firewall settings of your Mac device.

Step 5

Here are the steps that can help you to check the firewall settings of your Mac device. Go through the steps that are described below.

  1. At first, go to the Apple menu and click on the System Preference option.
  2. Then, go to the Security and Privacy option and select the Firewall tab.
  3. After that, click on the lock icon. This will help you change the settings in your iOS device.
  4. Now, enter your provided password and click on the Firewall option to uncheck the “Block all incoming connections”
  5. Thereafter, check the “Automatically allow signed software to receive incoming connections” and click on the OK option.  

Step 6

Now, if you find out that the quality of the video is low, then, you will need to adjust the display settings of your HDTV. After that, restart the Apple TV and you will also need to restart your router. Furthermore, you have to update your router and check its documentation. After that, install the software updates on your provided MacOS device. Then, launch the App store from your device and click on the Update option and disable the Wi-Fi and reenable it. Now, check if the problem is resolved or not.

Solution 2: Troubleshoot the AirPlay Issues  

If the above method does not work in resolving this glitch, then you can follow the upcoming steps to get rid of the situation.

Step 1

At first, move to the Apple menu and click on the System Preferences option. Then, click on Displays. After that, locate the AirPlay Display option and also search for the “Show mirroring options in the menu bar when available” option. If you did not find out this option, then you need to know that MacOS device doesn’t support AirPlay.  

Step 2

At first, check if your Apple TV is not in the Sleep mode. If your device is in sleep mode, then immediately wake up your Apple TV with the help of remote or with any other iDevice that supports Apple TV Remote application. After that, try to update iTunes with its latest version. Or you can reinstall the iTunes. Here are the steps that can help you to do so.

  1. At first, you have to open the iTunes application.
  2. Then, go to the menu bar which is located at the top of the iTunes window and click on the Help option.
  3. After that, you need to check if any Updates are available or not. If you find any updates, then click on the Update option.
  4. Thereafter, follow the prompts as per instructed. This will help you install the newest version of iTunes.
  5. After that, wait for a few minutes to complete the installation procedure.

Step 3

Now enable the Bluetooth device on your Mac device and also of your Apple TV. After that, you have to check for the software updates for your Mac or your Apple TV/AirPlay device. The AirPlay device needs to connect to the same Wi-Fi network as the Mac device. You should always try to connect the Apple TV with the router through an Ethernet cable connection instead of Wi-Fi network. Disable the Wi-Fi network and wait for a few seconds, and then enable it again.

Step 4

You should always avoid the applications which are unused in your MacOS device. And disable those applications that required a lot of RAM. Then, select AirPlay icon which is located at the menu bar under the Match Desktop Size To option. Click on Apple TV.

Step 5

If the AirPlay connection gets lost or faces any interruptions, then this happens due to the following situation.

  1. If you certainly locked your device and place it to the sleep mode. Or this may happen when you suddenly switch to a different application in your iOS device.
  2. The problem may also appear if you have Restarted your Apple TV or your MacOS device.
  3. The problem may also appear while Restarting or Updating the Router.

Solution 3: Change the Mac Firewall Settings

The problem might be resolved by changing the firewall settings of your MacOS device. The undermentioned steps will help you to do so.

Step 1

At first, click on the Apple menu, then select the System Preferences option. After that, click on the Security and Privacy option. Then, click on the lock icon if it is needed. Thereafter, you need to enter the administrator name and password this will help you unlock the Settings. After that, proceed with the steps which are mentioned below.

Step 2

Now, click on the FireWall Tab and select the Firewall options. After that, you have to enter the System Credentials if it is needed. Then, untick the Block All Incoming Connections from the next screen. And now, you will need to set the settings to enable the incoming attachments. Then you have to checkmark the “Automatically allow downloaded signed software to receive incoming connections”.

Step 3

Now, you have to be sure that you have enabled the exact settings on the Display settings this will help you to display the Airplay icon on your Mac. to open the mirroring option click on the Apple menu first and from there select the System Preference option. After that, as the new dialog box appears on the screen, select the Display tab and proceed further with the following steps.

Step 4

After you set it up, the AirPlay icon will appear on the top of the screen of your Mac. It will only help you when it will be available from the list of options.

Step 5

From the list of options, you need to select the first one from the Resolution section and check the Adjust Brightness option to automatic. You can do so by checking the box that appears in Resolution section in the Display tab.

Step 6

Once you are done with all the steps, close down the window and check if the error exists in the system or not.

Solution 3: Switch to AirPlay Mirroring Mode

If the methods mentioned above did not help you to resolve your problem with Apple AirPlay not working on Mac, then you should switch to AirPlay mirroring mode in your MacOS device. Here, are the steps that can help you to fix the problem.

Step 1

At first, you will need to click on the AirPlay icon which is located at the top right of your MacOS menubar. Then, click on the Mirror Built-In Display option. This will help you to mirror Mac’s native resolution in the Apple TV.

Step 2

Now, enter your provided password.

Step 3

If you need to stop the mirroring or using the Apple TV with another display, then you need to click on the AirPlay icon which you can find on the menu bar. Thereafter, click on the Turn AirPlay Off option. Now, reboot your Modem and Router and check if the problem is resolved or not.

Parting Words

The purpose of writing this article was to give you detailed information on the issue with AirPlay not working on Mac. Hope, this article has helped you to resolve your problem. If you have any more question regarding this topic, then you can leave a remark in the comment section.

27Apr/19

Why Bluetooth Device not Showing Up Mac?

Bluetooth device not showing up Mac is one of the most important errors that can halt the Bluetooth sharing trends. You can share any kind of media files while using Bluetooth but certain technical glitch appears while using this application. If you are dealing with the issue, then don’t panic. Here, in this article, we are going to present some effective solutions that can help you to fix the problem with your Bluetooth device. Go through the entire article and resolve the problem on your own.

Effective Solutions on Bluetooth Device not Showing up Mac

In this part of the article, we are going to present some effective solutions that can help you to fix the issue. So, let’s have a look at the upcoming part of the article to know the details.

Solution 1: Turn Off and Turn On the Bluetooth  

You can get rid of the issue by just turning On and again turning Off the Bluetooth device. Here, are the steps that can help you to do this:

  1. At first click on the Bluetooth icon which is located on the Menu bar, at the top of your computer screen.                                                                                                     
  2. Thereafter, click on the Turn Off option.
  3. Then, click on the Turn On option.

Otherwise, you can use the System Preference option, that can also help you to do this. Here, are the steps that can help you to do so.

  1. Use the System Preference Utility, which is located at the bottom of the computer screen.
  2. After that, click on the ‘System preference’ option
  3. Now, click on the Bluetooth icon from the appearing menu.
  4. Thereafter, click on the Turn Off option and disable the Bluetooth device.
  5. After that, click on the Turn Off option and enable the Bluetooth device. And, check if the problem is resolved or not. If this was not enough to help you to fix your problem, then you should try the next step.

Solution 2: Remove the Bluetooth Device

You should remove the Bluetooth device to get rid of the issue. If the procedure is unknown to you, then the steps which are mentioned here will help you.

  1. At first, go to the ‘System Preferences’ option and follow the steps mentioned above.
  2. Thereafter, click on the Bluetooth icon.
  3. After that, if you detect the device which is causing the problem, then click on “X” which is located just beside it. This will help you to remove the issue.
  4. Once you are done with the steps which are mentioned before, now click on the Restart option.
  5. Now, wait a few minutes to Restart your device.
  6. At the next step, you need to reconnect the USB device. And, check if the problem is resolved or not.

Solution 3: Verify the Interference

If the procedure which is mentioned in the earlier part of the article is unable to fix your problem, then you should verify if there is interference. If you are operating through 2.4 GHz band, then sometimes it may interfere with the Bluetooth device. Sometimes, metal objects might be the causes behind the issue with your Bluetooth device. So, check if there are any metal objects around your devices.

Solution 4: Remove and Restore “Bluetooth.plist” file

There are two methods that can help you to remove the “plist files” from the Mac device. The methods are hereby:

  • Using Terminal
  • Using Finder

Now, here we are going to discuss the steps that can help you to do so. Go through the steps mentioned below:

Use the Terminal

Here are the steps that can help you run the Terminal method. Go through the steps, under mentioned.

  1. At first, you will need to launch the Terminal from your device. To open it at first click on the Finder icon. After that, as the Finder opens select the Go Menu, and then go to the Utilities. In Utilities, you will find the Terminal.
  2. Thereafter, type “sudo rm -R /Library/Preferences/com.apple.Bluetooth.plist”
  3. After that, hit the Enter button.
  4. Then, type your login password in the appearing space. And, again hit the Enter button.
  5. After that, you will need to restart your Mac device.
  6. Go to System Preferences and click on the Bluetooth icon.
  7. Then, click on the Turn On Bluetooth option.
  8. After that, you will need to pair your devices.

Use the Finder

You can also use the Finder option to get rid of the trouble. Here, are the steps that can help you to do it.

  1. At first, you have to launch the Finder option from your Mac iOS device.
  2. Thereafter, click on the Go option. Then, move on to the Folder
  3. And type  “/Library/Preferences” in the appearing dialog box and click Go.
  4. At the next step, you will need to find out the “com.apple.Bluetooth.plist file”. After, finding that move it to the Trash.
  5. Then, again click on the Go option, and then select the ‘Go to Folder’ and type “/Library/Preferences/ByHost” and again click on the Go option.
  6. Now, you need to search for the “com.apple.Bluetooth.XXX.plist”  file and move it to the Trash files.
  7. Furthermore, you will need to proceed with restarting the Mac device. This will help you to generate the “Bluetooth plist files” automatically.
  8. Then, again turn On and turn Off the Bluetooth and check if the problem is resolved or not.

Solution 5: Re-configure and Reset the Bluetooth device

If all the steps from the previous part of the article was unable to fix your problem, then this step can resolve your problem easily. Go through the part which is mentioned below and get rid of the issue.

  1. At first, press and hold the shift + Option/Alt both at the same time from your keyboard.
  2. Then, click on the Bluetooth icon from the Menu bar.
  3. Thereafter, click on the Debug option and remove all the devices.
  4. After that, again launch the menu and click on the Debug option again.

Now, reset the Bluetooth modules and re-pair the Bluetooth device. Then, check if the problem still persists or not.
Hope, this article has helped you to fix the problem with Bluetooth device not showing up Mac. If you have any queries, then you can comment below.

25Apr/19

Solve If your Mac Screen Keeps Going Black?

Mac screen keeps going black is one of the general issues that most of the Mac users face and it is indeed quite frustrating. This issue appears when the system battery is running out. If you are a Mac user and facing a similar issue, then this article will help you. Here, you will get all the possible procedures to get rid of this particular problem. After performing all the procedures you can quickly resolve this issue on the Mac system.

Possible Reasons Behind the Mac Screen keeps going Black

Now, we have listed some of the common reasons for the Mac screen keeps going black problem.

Battery Drain

Battery drain is one of the common causes of this issue. If your Mac device is connected but the battery is not charging, then it could be due to a fault in the battery cord. This will subsequently result in Mac showcasing a black screen and freezing unexpectedly.

Display Problem

Most of the cases, the MacBook becomes black at startup. However, the activity indicator, fan, or startup sound will continue to function, indicating that the computer is on. So, it looks like a Mac screen difficulty.

Wrong Disk Permissions

Sometimes, this issue appears when the disk permissions are inaccurate. Because, if you set incorrect permissions, then you can see that the Mac pro screen goes black.

Glitches in any Third-Party Apps

The glitch in any third-party apps can cause this issue on the Mac system. If you are using any third-party apps or recently installed an app on the system, then this problem may occur on your Mac device.

Now, let us proceed to the methods for solving Mac screen keeps going black problem.

Procedures to get rid of Mac Screen keeps going Black Problem

We are going to share different and effective procedures that can help you to eliminate the Mac screen keeps going black issue. Let’s have a look at the given below:

Procedure 1 – Turn Off the Energy Server

This is one of the most reliable procedures to resolve the problem when the Mac pro screen goes black. If the energy server is turned On, then you may see this issue on the system. So, you need to disable the energy server. To do so follow the steps mentioned below:

Step 1

At first, you have to go to the Apple logo which is present at the top left side corner. From that menu list, you will get an option ‘System Preferences’ select it.

Step 2

In the System Preferences window, you can see the Energy Server tab, select it. From the Energy Server section, you need to navigate to the Power Adapter section.

Step 3

In the Power Adapter window, unmark everything. Then, set the ‘Computer and Display sleep’ to  ‘Never’. After doing this again follow the same procedure for the Battery section.

Procedure 2 – Force Restart

When you see this issue on your Mac device, you need to force restart the device. So, at first, you have to hold and click on the Power key at least 5 seconds, until the Mac system shut down perfectly.  After shutting down the system, you need to wait for at least 10 seconds and again turn it On by pressing the Power button. After doing this you can check whether the Mac system perfectly works without any issue.

Procedure 3 – Check the Mac’s Battery

This is another easy procedure that can help you to fix the Mac screen keeps going black issue. When this issue appears you must check whether Mac’s battery is in working condition or not. To complete this procedure follow the steps given below:

Step 1

At first, you have to click on the Apple icon to open the Menu list. From that list, you can see an option ‘About this Mac’, select it.

Step 2

In the ‘About Mac’ window, you need to click on the System Report, and then select the Power from the left side panel.

Step 3

On the left side panel, you have to check whether the battery status. Verify your Mac’s battery Cycle count and condition. If the status report is negative, then you need to replace it with a new battery.

Procedure 4 – Reset NVRAM Settings

If the above-mentioned procedures do not help you, then you need to try this procedure to eliminate this issue on the Mac system. NVRAM is the full form is Non-Volatile RAM. This is the functionality that helps in memory improvements for displays, startup disk, speakers, etc. Reset the NVRAM and it will turn the device to the factory position. If you do not know how you can do that, then follow the under mentioned steps:

Step 1

Firstly, you need to switch Off the Mac system by pressing the Power button for at least five seconds. When it is turned Off, then again keep pressing the Power button to boot up your device.

Step 2

When you hear the first startup sound, hold and press the COMMAND + OPTION + P + R buttons on the keyboard. Continue holding these buttons till you listen to another startup sound. After doing this release all these buttons and check if the Mac system opens without any problem.

Procedure 5 – Update the Mac Operating System

If you have not updated the Mac OS, then you may face Mac screen keeps going black issue. So, you must keep the system is updated. To do this:

Step 1

Firstly, you have to open the Apple menu list by pressing the Apple logo. In that list, you will get an option System Preferences tab, click on it.

Step 2

From the System Preferences section, you should click on the Software Update tab, to check for the updates. If any updates show on the screen, then click on the Update button. Now, you should see the update process has begun. Once it is done, restart the system, and then check whether the issue is resolved or not.

Procedure 6 – Reset the System Management Controller

With the help of the System Management Controller, you can easily solve the display problem on your Mac device. Follow the steps cited below:

Step 1

In the beginning, you need to launch the Apple menu list by pressing the Apple logo. Under the menu list, select the Shut Down option to switch Off your Mac device.

Step 2

When your device is Off, you need to hold and press the Shift + Control + Option buttons and at the same time, you need to press the Power button from the keyboard. Press these buttons at least 12 seconds.

Step 3

After 12 seconds, you need to release all these buttons and press the Power button to turn it On, and then check whether the issue should be fixed.

Procedure 7 – Restart the Mac with the Specific Buttons

You need to restart the Mac system with the specific buttons. Follow the steps here under:

Step 1

At first, you need to press the Power button to open the Shutdown page. Even if the system screen appears black, but still you can see it.

Step 2

After that, you have to press the S button to put your Mac device into Sleep mode. Next, you need to press the Power button for 5 seconds. Then, release it.

Step 3

Wait for the 10 seconds, and then again press the Power button to restart the system. And, then check whether the Mac system works or not.  

We hope, in this article, you will get all the solving process for the issue, Mac screen keeps going black. Carefully read these procedures and choose any one procedure which is suitable for your Mac device. After performing all the procedures, if the issue is still occurring, then there is a problem in the hardware. So, you need to replace it to get rid of this issue.

25Apr/19

How to Resolve Mac Screen Sharing Not Working?

Mac screen sharing not working is one of the most prominent errors that different Mac users face. There might be a lot of aspects responsible for the occurrence of the error. Among them, bad internet connection or any internal glitch of the system can lead to these situations. No matter how bothering the issue is, there are certain fixes you can try. Here, in this article, we are going to discuss all the troubleshooting techniques which will make your task easier. Have a look at them:

Solutions to Troubleshoot Mac Screen Sharing not Working Issue

In the rest of the content, we have provided some practical methods that will surely help you to fix the Mac screen sharing not working issue. Check them out:

Solution 1- Use iMessage

This is the first thing that you should do to fix this issue. You can use  Apple’s iMessage chat to troubleshoot this issue. Through the messaging app, you can quickly share the Mac screen with another party.

While sharing the screen, the other party can control your computer by requesting access, for this, you need to grant permission. Here are the steps that you should apply to fix the problem.

  1. In the beginning, you have to install the Message application and from there you have to click on the ‘Preference’ tab.
  2. After that, a new window will appear on the screen and after that, you have to log in with your Apple ID
  3. Then, you have to start a new chat with the person with whom you want to share the screen.
  4. On the top right of that window, you can see a lot of options, from there you have to click on the Details option.
  5. After that, you have to click on the Screen Sharing button. It will lead you to a new page.
  6. From the new page, you have to select the ‘Invite to share my screen’ option.
  7. Now, the third party has to accept the request. Once you confirm the request, then a face-time audio call will begin in front of the screen. Now, you can chat with the other party.

You can also use the app icon, which is located on the menu bar. So, you should look at the top right corner of the Mac screen. Once you find it, then click on the Allow button.

Then, exit from the page and reboot your machine, and then check whether the Mac screen sharing not working issue still irritates you or not. If not, then move to the next solution.

Solution 2- Use “Back to My Mac” Tool

If the above solution does not work for you, then we suggest you use “Back to My Mac” Tool. This is a very easy process if you use more than one Mac device. iCloud has an inbuilt tool which is known as “Back to My Mac” Tool. So, if you want to overcome Mac screen sharing not working issue, then you have to enable this feature. To use this tool, look at the steps which are given below.

  1. In the beginning, you need to make sure that you are logged into the iCloud. Then, navigate to the System Preference.
  2. On the same screen, you have to make sure that the “Back to My Mac” tool is enabled.
  3. Now, again go to the System Preference and after that, you need to navigate to the Sharing section.
  4. In the Sharing section, you can see a lot of options, from there you need to click on the  Screen Sharing option.

The machine that you want to access must be turned On, but not necessarily signed in. And, in case if you use the computer directly, then you can log in with the “Back to My Mac” tool.

To access the computer at first, you need to set the “Back to My Mac”, then launch the Finder. Then, go to the Shared heading.and under this look for the computer.

In case, you have already disabled the Finder sidebar, then you have to navigate to the View option. After that, click on the Show Sidebar to enable it. In case, you are unable to see the Shared section, then go to the Finder section. From there, click on the Preference option. Then, click on the  Sidebar option. After that, enable the “Back to My Mac” tool, under the Shared heading.

Once the computer appears in the Finder sidebar, you should click on it. Now, the Share Screen will appear at the top of the window, you should click on it and wait for sometimes.

Now, a new window will appear on the screen of your computer and when the connections get stable, then you can control the machine.

After that, you will successfully get rid of this Mac screen sharing not working issue.

Solution 3- Change Remote Management Setting

If you are not comfortable with the above two solutions, then here is another alternative for you. So, at first, go to the Apple menu, and then select the System Preference. Then, navigate to the Sharing option. In case, the remote management is selected, then you have to deselect it. As you cannot operate both the Screen Sharing and Remote Management at the same time. So, you have to mark the dialog box which is located beside the Screen Sharing tickbox. Now, you need to specify who can share your screen. So, you should choose any of the following.

  1. All User:- Anybody can share your screen, except the guest users and sharing only users. In case, the Mac is connected with a network account server, then anyone who is connected with the server can share the screen.
  2. Specific Users:- If you applied this condition, then only a specific person can see your post.

If you only select the Only these users, then you have to click on the Add button, then try any of the following.

  1. Choose a user from the Users & Groups
  2. Select a user from the Network Users

Now, to set an additional option for the screen sharing, you should click on the Computer Settings option, then choose any of the following:

  1. Anyone may request permission to control screen
  2. VNC viewers may control screen with password

After that, the Mac screen sharing not working issue should be resolved.

Conclusion

We believe with the help of the above solution you can quickly resolve this issue. However, if you think, you can not apply those on your own, then we suggest you not to waste your valuable time and rely on a professional to get the prominent solution on this.

25Apr/19

What to do when you Can’t Sign Into iCloud On Mac?

Can’t sign into iCloud on Mac is one of the common problems that can interrupt a seamless workflow. The system presents a message displaying that a connection to the iCloud cannot be established due to an issue with the email address. And then, it instructs the users to launch the iCloud preferences. Now, once inside the panel of Mac iCloud preference, some people may sign in to the iCloud successfully. But, a separate error appears stating that an unknown error has taken place whilst logging in. Also, at times, the preference panel of the iCloud tends to freeze and spin continuously.

Now, once both the errors show up, the Mac device tends to stick in an endless loop of the iCloud sign-in failures. Also, the error pops-up continuous messages which bar all the iCloud functionality encompassing FaceTime, Mail, Notes, Messages, Calender, Contacts and several other to the iCloud associated abilities. This article aims to help the concerned users through the solutions effectively. But, before that, it is necessary for Apple users to know the cause or reason for the manifestation of the problem.

Can’t Log into iCloud on Mac Issue: The Probable Causes

The Apple devices, like other electronic ones, too, are prone to several challenging issues. Regardless of the degree of sophistication that such branded devices provide, errors are common to all. And of those annoying complications, the users’ complaint that they can’t sign into iCloud on Mac is what this article emphasizes to resolve.

The common reason for the iCloud syncing and login failures is that the users, probably, are signed into a particular Apple ID on a particular device, as well as, a separate one on a different device. That is because Apple interprets them as separate devices, two separate accounts, two separate users for which the devices fail to sync. And now, this leads to the refusal to sync with so many other applications integrated into the device. Therefore, this confuses the users and makes them anxious for getting solutions to treat the problem, since the users can’t log into iCloud on Mac. So, read along to know the procedures by which you can eradicate the complication.

How to Resolve iCloud’s Failure to Connect to iCloud?

The problem such as this refusal to establish the connection poses as a hindrance to the smooth flow of the regular tasks. However, for that, it is essential to know the causes of the problem beforehand in order to quicken the troubleshooting process and make desirable changes. In this article, we present a series of troubleshooting procedures which aims to fix most iCloud connection problems on Mac. However, stay fixed and read along with the underlying procedures which discuss various steps on treating the can’t sign into iCloud on Mac problem comprehensively.

Procedure 1: Inspect if the iCloud is Down or Not

Whenever the question comes to troubleshooting a certain problem, it is recommended to begin from the basic inspections. Like if the cables and cords are connected properly or the internet connection is working. These prior measures ensure not to skip any essential action. In case of ignoring the basic checks, it makes the entire troubleshooting process full of hassles. For this, you must check if the iCloud on Mac is at an affirmative state. Head to the official website of Apple and navigate to the System Status in the Support section and confirm the availability of all the Apple online assistance. Now, the complaints that users can’t sign into iCloud on Mac can now be taken care of.

There may exist a perpetual issue with the connectivity, if the iCloud is down, because of caching. In that case, commence with the underlying procedures below which aims to resolve the difficulty.

Procedure 2: Quit all the iCloud Applications and Reboot Mac

In case the issue persists, this procedure may save the day. In this method, we encourage you to quit every application which is using iCloud. Now, this includes you to quit Messages, Calendar, Reminders, FaceTime, Notes, etc. Also, ensure to quit the System Preference application. And, in case the applications freeze up or get stuck midway, make sure to employ the Force Quit on the Applications in order to exit them. The problem that users can’t sign into iCloud on Mac can easily be resolved with this procedure.

Now, once the users have quit the applications, proceed to restart the Mac. For this, head to the Apple menu and opt for the option for Restart. In case the mac freezes, you can also command the system to perform a forced reboot. When the Mac starts again, make sure not to launch any iCloud associated application. Instead of that, head to the panel of the iCloud Preference. Then, attempt to sign in to the Apple ID or the iCloud account once again. Here, the login procedure must operate as normal which assures the functionality of the Messages and FaceTime.

Procedure 3: Eliminating iCloud Configuration Files

Before executing this method, make sure to back your Mac up. Or else, you tend to lose important files and documents. First, opt for the Go menu from the Finder. Then, type in the address or location: ~/Library/Application Support/iCloud/Accounts/. After that, copy the files which are found in the location, which can be conveniently recovered if desired. Next, remove the files from the location mentioned recently. Finally, proceed to reboot Mac. A re-login into the iCloud is needed. Also, users can log out, as well as, sign back into the iCloud, in case the can’t sign into iCloud on Mac issue persists in order to regenerate fresh Account data files.

Procedure 4: Sign Out and Sign Back into the iCloud

You are aware that iCloud is online, so make an attempt to quit all iCloud applications. But if you still encounter challenges, you’d desire to sign out of the iCloud, then reboot and then sign back in. Then, head to the Apple menu after which must launch the System Preferences. Opt for the iCloud after that. Select the Sign Out option. After it is done, proceed to ‘Reboot the Mac device normally’. Now, once the Mac boots up once again, revert back to the iCloud Preference and then log in to the Apple ID. This procedure is sure to solve the error easily. Hence, follow the steps and methods in order to fix and troubleshoot the problem which makes the users complain since they can’t sign into iCloud on Mac.

In this way, the complication, that the system generates due to certain probable reasons is sure to go away. But, for that, as said earlier, users must know the causes for which this problem takes shape. That is because it assists in treating the error quickly since it gets detected easily.

25Apr/19

What are the ways to Fix DNS Address Could Not be Found Mac?

DNS Address could not be found Mac is an error which arises due to DNS misconfiguration and usually getting displayed on Google Chrome. Most of the people encounter this issue while using Windows 8, Windows 8.1, as well as Windows 10 versions. Although, MacOS users should be aware of this issue. The main cause of this issue on Google Chrome can be unresponsive design, not being able to access DNS server, as well as, IP address change at the server level. The IP address of the website which you wish to access is basically used for the purpose of the packet to packet communication. This is done in order to transmit the information to the destination.

However, when the DNS server can’t extract the IP address of the website, Google Chrome puts up a DNS address could not be found Mac popup. Henceforth, go through this informative article patiently in order to know the effective fixes for the aforementioned issue.

How to Fix DNS Server not Responding Mac Error on Google Chrome?

People who face Google chrome error DNS error on Mac states that disabling add-ons, restarting the system, restarting Wi-Fi router, etc can’t fix this critical problem. This is owing to the fact that the bug generally occurs because of faulty DNS configuration. Henceforth, you should go through the under-mentioned methods. However, in rarest scenarios, Google Chrome might appear because of the unwanted programs which impede the action of the browser. Similarly, you must repair this DNS Error Mac by executing an entire system scan with a specialized system optimization tool.  Therefore go through this step by step tutorial guide to fix DNS Address could not be found Mac issue.

Fix 1: Clear-Host Cache

As mentioned earlier, Server DNS address issue is basically related to add-ons, plugins, as well as, extensions. Hence, you need to make an attempt to clear the host and DNS cache as mentioned below

  1. Firstly, you need to open the Google Chrome and press Menu icon.
  2. Then, you have to choose the New Incognito window.
  3. After that, you need to copy, as well as, paste ‘chrome://net-internals/#dns’ into the URL bar. Then, you need to tap Enter.
  4. Next, you need to detect the Clear-Host Cache button, and then press on it.
  5. When you complete this, you should right-click on Windows key. After that, you should choose Command Prompt (Admin).
  6. You need to copy, as well as, paste the below commands in the ‘cmd’ environment. Then, you need to provide the following commands:
  • netsh int ip reset
  • netsh Winsock reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns

After that, you have to shut down the Command Prompt and you need to reboot the Google Chrome.

Fix 2: Configure DNS Servers

According to the experts, misconfiguration of DNS settings are the major cause of DNS address could not be found Mac. Henceforth, you need to configure it properly and for that go through the below steps:

  1. First, you need to press the Windows key. Then, you need to type the word ‘Control Panel’.
  2. After that, you need to choose the Control Panel option. Next, you should tap the ‘Network and Sharing Center’ option.
  3. Then, you have to choose Change Adapter settings. Next, you need to press on the connection icon (Local Area Connection or Wireless Network Connection).
  4. You need to choose Properties, and Internet Protocol Version 4 should be marked.
  5. Furthermore, you need to choose Properties. Then, you need to open the General tab.
  6. After that, you need to choose Obtain DNS server address automatically, and then you need to press OK.
  7. If Obtain DNS server address automatically has been marked, you need to choose ‘Use the following DNS server address instead’ option.
  8. Now, you need to provide the following server addresses, and then you need to press OK after some time.
  • Preferred DNS server: 8.8.8.8
  • Alternate DNS server: 8.8.4.4

OR

  • Preferred DNS server: 208.67.222.222
  • Alternate DNS server: 208.67.220.220

Finally, you may want to re-open Google Chrome and examine whether the issue has been resolved or not.

Fix 3: Renew and Flush DNS

Follow the below steps to eradicate DNS Address could not be found Mac issue.

  1. First, you need to press the Windows key. Next, you need to choose Command Prompt.
  2. Furthermore, you have to copy, as well as, paste the following commands in the ‘cmd’ environment. Then, you need to press Enter.
  • ipconfig /flushdns
  • ipconfig /registerdns
  • ipconfig /release
  • ipconfig /renew
  • netsh winsock reset catalog
  • netsh int ipv4 reset reset.log
  • netsh int ipv6 reset reset.log
  • Exit

Eventually, you have to reboot the system. Then, you need to open Google Chrome in order to examine whether this method is suitable for fixing DNS server not responding Mac issue.

Fix 4: Restart DNS Client Service

  1. First, you need to press the Windows Start button and choose Run.
  2. Then, you need to enter ‘services.mac’ and click OK.
  3. Moreover, you need to get through with the DNS client.
  4. Finally, you should right-click, and then you need to choose Restart.

To Sum it up

DNS address could not be found Mac error is a major problem, mostly encountered by Mac users. However, you can easily resolve this annoying issue if you follow this user guide thoroughly. But, if the above methods fail to fix this issue, you should reinstall the browser or examine a PC to evade the attack of unwanted programs or viruses. Also, we encourage you to provide your valuable feedback in the comment section present at the bottom of the website.