Contact Apple Technical Support Number Now:

All posts by Christine Campbell

Contact Apple Technical Support Number Now:


How to Fix iPad Error 4013?

iPad error 4013 is one of the common errors that annoy its users. Users generally encounter this error while trying to restore their iPad with iTunes. Once you encounter this error, the restore operation cannot be carried out and thus you can’t use your iPad until you get this issue fixed. Thus, we have stressed upon this error specifically in this article. Those who are experiencing this error on their iPad can refer to this article. Hope, it is going to help you and provide a proper solution. 

Methods to Fix iPad Error 4013 Manually

Generally, the 4013 error is associated with a hardware issue. Still, we have sorted out some of the effective ways that can help you in this aspect. So, let’s talk about them and solve the issue. 

Method 1: Check the USB Connector and Port

A faulty USB cable or port is found to be causing this issue in most of the cases. Thus, make sure that the USB connector or the port isn’t faulty.

  1. To ensure this, connect your iPad to another USB port of your PC via the same USB cable. 
  2. Then launch iTunes on your PC and try to restore your device. 
  3. If the process fails, then change the USB cable and try out the restore process. 
  4. If the iPad restore error 4013 repeats itself, then none of the USB port or connector is faulty. 
  5. Hence you will need to go for some other solution. 

Though it is easy to apply the methods, it is difficult to figure out the actual cause of this error. Thus, you can consult with a tech expert to help you in this regard. 

Method 2: Configuration of iPad

Configuration of iPad

iPad error 4013 can occur due to an incorrect configuration of the iPad. Thus, reset your iPad settings in order to fix system malfunctions by the following steps:

  1. At first, restart the iPad and open the Settings app. 
  2. Navigate to the ‘General Settings’ section and tap the ‘Reset’ button.
  3. Then select the ‘Reset All Settings’ option and wait for the process to complete.

Method 3: Check the Internet Connection

  1. At first turn off the WiFi on both your iPad and computer. 
  2. After a few seconds, turn on the WiFi on your iPad as well as your computer. 
  3. Then launch iTunes on your PC and see whether you can restore your device or not. 
  4. If the process fails, then shift to another network that has good strength. 

Method 4: Enable the DFU Mode

Enable the DFU Mode

DFU Mode is also known as the Recovery Mode that is capable of fixing different iOS problems in no time. 

  1. Connect your iPad to your PC via a USB connector and open iTunes. 
  2. Press and hold the ‘Sleep/Wake’ and ‘Home’ buttons on your iPad until it enters the DFU mode. 
  3. Now release the buttons mentioned above and restore your iPad. 

Method 5: Update iTunes

Update iTunes

  1. Turn on both your iPad and computer and connect them to a wireless connection. 
  2. Now, launch iTunes on your PC and click the ‘iTunes’ menu on the iTunes window. 
  3. iTunes starts checking for the available updates and displays if any updates are pending. 
  4. Then click the ‘Install’ button next to the pending updates to get them on your PC.
  5. After installing the pending updates, see whether it is possible to restore your iPad or not. 

Method 6: Free Up Disk Space 

Free Up Disk Space 

Restoration of iPad with iTunes might fail if there isn’t enough space available on your device. Hence free up some space on your iOS device to check whether you can restore your device or not. 

  1. Turn on your iPad and open the Settings app. 
  2. Click the ‘General’ tab on the Settings window and select the ‘Storage and iCloud usage’ option. 
  3. Tap the ‘Manage Storage’ button and choose an app which you think is taking too much space on your device. 
  4. Tap and hold the app until an ‘Uninstall’ option appears. 
  5. Then, select the ‘Uninstall’ option to remove that app from your device. 
  6. Repeat the same process if it is essential, to uninstall more apps installed on your iPad. 
  7. Now, restore your device and if the process is successful, then you can re-download the uninstalled apps from the App Store. 

Method 7: Perform a Factory Reset

Perform a Factory Reset

It is the last method you can attempt if the above methods fail to fix the iPad error 4013. Note that it is a bit complicated method and can delete all data on your iPad. Thus, it is recommended to backup your device before applying the following steps:

  1. Turn on your iPad and make sure that it is connected to a network.
  2. Go to Settings and tap on ‘iCloud.’
  3.  Move to the ‘Backup’ tab and choose ‘iCloud Backup.’
  4. Tap the ‘Backup Now’ button and wait until the backup is complete. 
  5. Then go back to Settings and select ‘Manage Storage’ to ensure that you have backed up your iPad successfully. 
  6. Now open the Setting app once again and tap the ‘Reset’ button under the ‘General’ tab.
  7. Tap the ‘Erase All Content and Settings’ button and enter the passcode you have set for your device. You don’t have to worry if you haven’t set a passcode for your device beforehand. 
  8. When prompted, enter both your Apple ID and password to start the factory reset. 
  9. When the reset is over, you will come across a welcome screen which you need to swipe. 
  10. Hope, you won’t have any issues in restoring your device now. 

The methods discussed in this article are already tested and fixed iPad error 4013 successfully for a number of users. Therefore, hopefully, you will also find them useful and get rid of your problem without any hassles. For any additional information or queries, shoot your feedback in the comment section below. 


How to Backup iPhone on iTunes?

A lot of iPhone users utilize the backup to iCloud which is a common solution to use for backing up your device. However, the best way to transfer all your data is to make sure that you have your text messages is backed up on iTunes.

In this section, we will talk about how to backup iPhone on iTunes. This is useful in cases when you want to factory reset and restore your iPhone or you bought a new iPhone and want to transfer data from the old one to the new one. Sometimes, you just want to clear files to have some breathing space on your iPhone. Hence, let’s dive right into the method.

How to Backup iPhone on iTunes without any Glitch

If you back up the iPhone on iTunes, it will be easy for you to access the data anywhere and anytime using WiFi. But the backup process can be confusing sometimes. 

Hence, you need to know the exact procedure on how to backup iPhone on iTunes without any glitches. Here, we will discuss encrypted and unencrypted backups to your computer and their location as well.

The steps below are for the unencrypted backups to your computer.

Step 1

launch the iTunes application on your comput eror Mac

The first thing you want to do is to launch the iTunes application on your comput eror Mac and connect the iPhone using the lightning connector. You may need to follow on-screen instructions on your iPhone. Now, your iPhone will appear on iTunes. Now move to the left-hand corner and you will find a little iPhone icon in the top left corner, tap on that. 

Step 2

right-hand side section, you will find the backup settings option. If the selection is iCloud, then change it to This Computer

When you come to the right-hand side section, you will find the backup settings option. If the selection is iCloud, then change it to This Computer. Now, all your future backups will be backed up to this computer and not the iCloud.

Since these are the steps for the unencrypted backup, simply hit the Back up now option. You will find that the backup process has been started and the iPhone is being backed up to your computer.

This will backup everything on your iPhone to your computer but the Health and Activity Data. If you want to backup your Health and Activity Data to your computer, you need to encrypt it. To do that, follow the steps mentioned in the section below.

Step 1

At first, go and check the location if the backup on your computer. Open any folder on your computer. Now, using the folder tree, at the left-hand side, go to the C-drive. After that, on the right-hand side, go and select the Users option. Then, select the User Name and tap on the App Data option.

Step 2

Thereafter, select the Roaming option and choose Apple Computer from that section. After that, click on the MobileSync option. Finally, select the Backup option.

You will find the backup folder which has all your backup data when you do a backup in iTunes. You can copy it and save it to your external hard drive to avoid accidental damages such if your computer got corrupted for some reasons.

Hence, move ahead and check how to take an encrypted backup so that you can back up your Health and Activity Data as well.

Step 3

Now, in the same backup section of iTunes, you have to select the Encrypt iPhone Backup option. When you select that, it will ask you to create a password. It is better to write the password somewhere and store it safely because you can not restore your backup without the password. And there is no other way to recover the password.

Step 4

When you are done, type the Password two times and simply tap on the Set Password section. As soon as you tap on the button, your iTunes will start backing up your iPhone automatically. Next time when you connect your iPhone to iTunes, you just have to tap that Backup Now button and the backup will be encrypted automatically.

When you want to restore this backup, you will need the backup password. This backing up process is going to take a long time. When the backup process has been completed, check the latest date and time of the encrypted backup.

You can verify it by going to the Edit option. Click on that and a drop-down menu will appear on the system screen. Select the Preferences option. After that, select the Devices option and you will find the latest iTunes backup with encryption. 

You will find a small lock there which indicates that the backup is encrypted. And since it is encrypted, it has your Health and Activity Data as well. These are the steps that you can apply to backup your iPhone on iTunes.

Wrapping it Up

Therefore, these are the steps that you can apply to backup iPhone on iTunes. Simply go through the above steps carefully and apply them in order to do that. If you face any problem regarding this, simply post your queries in the comment section below. We will get back to you with accurate information and solutions.


Why there was an Error Connecting to Apple ID Server?

The error statement “Verification failed. There was an error connecting to the Apple ID server” is one of the most common and troublesome error notifications whenever attempting to authenticate to the ID server of Apple.

Moreover, a lot of iPhone and Mac users have confronted these types of issue on the system. You may encounter this annoying technical glitch due to poor internet connection, incorrect computer time setting, erroneous Keychain Access and improper certificate settings. 

However, if you are stuck with this same error notification and wondering how to fix it. Then, pat your back as you have dropped on the right page.

Here, in this informative post, we will walk you through some of the most effective and easiest troubleshooting hacks by which you can easily get rid of this annoying technical glitch on your own. 

Error Connecting to the Apple ID Server: Quick and Effective Fixes      

You can easily resolve this troublesome technical glitch by some easy troubleshooting fixes and you do not even require any extra technical knowledge or ideas to execute the troubleshooting ways and steps.

However, you will find several types of ways and steps to troubleshoot this common technical glitch. But, you need to perform some effective ways which can ensure the optimal solution in no time.

Here, in this passage, we have described some effective ways to diagnose this issue. Thus, without delaying too much. Let’s get into the solutions directly.  

Way 1: Update the Time and Date

Update the Time and Date

This is the most fundamental method that you should try to resolve this annoying technical glitch. Moreover, you need to make sure that the date and time of the system is set properly.

On this note, check the below-stated steps:

  1. At first, you need to go to the Settings of the system. 
  2. Tap on the General option in the Settings menu. 
  3. Choose the Date and Time option in the general menu.
  4. In this step, you need to turn on the toggle Set Automatically and ensure you have chosen the correct time zone.
  5. After completing all the above-mentioned steps, restart the system for good measure. 
  6. Now, check the system to verify that the error notification is resolved or not. 

Way 2: Sign Out from iTunes & App Store

Sign Out from iTunes & App Store

By performing this method, you can fix several minor technical bugs of the system. Moreover, this is not a troublesome task. You just require to follow some easy steps.

Therefore, take a look at the below-mentioned passage in detail to know the steps on how to sign out from the iTunes application and app store.

  1. At first, launch the Settings app. 
  2. After that, try to open the iTunes application & App Stores.
  3. Then, hit your Apple ID. you may find your ID at the top right corner. 
  4. Now, you will get a pop-up window which shows up on the screen. 
  5. Next, you need to select sign out from that pop-up window.
  6. Whenever it sings you out, sign back in with the help of your Apple ID.

Way 3: Log out and Log into Your Wi-Fi

Log out and Log into Your Wi-Fi

In case, the above-mentioned method did not work for you. Then, try this method in order to fix this frustrating technical glitch. You need to log out and log into your wifi network to fix such type of connectivity issues.

On this note, go through the following section:

  1. At first, you need to go to the Settings menu. 
  2. Choose the Wi-Fi option in the Settings menu. 
  3. Select the info button which is next to your Wi-Fi network
  4. Ta[p on the Forget This Network option.
  5. Choose the Forget button whenever prompted to verify your choice.
  6. Now, it’s time to turn off the network of your Wi-Fi. Now, you need to wait for a minute while and again turn on the Wi-Fi.
  7. Choose the same Wi-Fi network whenever the networks of the Wi-Fi show up.
  8. After that, you may require to write the password of the Wi-Fi network to choose the Wi-Fi network and log in.  

Way 4: Reset Network Settings

Reset Network Settings

Are you still facing the same technical glitch? You need to try to reset the network settings of the iPhone. Moreover, you need to keep in your mind that the procedure will not delete any data from the memory for the phone.

This process will only delete the network settings and passwords of the Wi-Fi network. To reset the settings of the network, check out the following steps:

  1. At first, you need to go to the Settings of the system. 
  2. Tap on the General option in the Settings menu.
  3. Now, scroll down to the bottom and choose the Reset section. 
  4. After that, select the Reset Network Settings option. You need to enter the password of the network if needed. 
  5. Now, a pop-up dialog box will show up on the screen. Choose the Reset network settings button in the pop-up dialog box to confirm your choice. 
  6. Tap on the Ok button.

Way 5: Change Your Apple ID Password

Change Your Apple ID Password

In case, the password of your Apple ID is old, then it may not meet Apple’s recommendations for security purposes. Moreover, there is a high chance that this can be the cause of verification issues.

Fortunately, you can easily replace it on any device along with an internet connection. To change the password of your Apple ID, go through the following steps:

  1. At first, go to the Apple ID website. 
  2. After that, tap on the Manage your Apple ID option on the website. Now, you need to sign in with your Apple account by entering the correct ID and Password of the account. 
  3. After signing in to your Apple account, tap on the Password and Security option. You may get this option in the left menu of the screen.
  4. Now, you need to answer all the security type questions of your Apple account. This process will verify your identity. (Here, in this step, you can also enter the particular number or code that Apple sends to your mobile phone.)
  5. After that, tap on the Change Password option. Now, you will get a new page on the screen. 
  6. In the new screen, enter the current (old) password of your Apple account. 
  7. After that, write a new password for your Apple account. Write the password twice to confirm the new password for your Apple account.
  8. Tap on the Ok button to save the changes that you have made on the password screen. 
  9. Whenever the page allows it, you will require to update the new password on all your Apple Devices.
  10. Reboot the system after completing all the steps. 

Now, you should be capable to log into your iCloud account by utilizing any Apple Device. If the troublesome issue still persists, it is advised to move out to the below solutions. 

Way 6: Force Restart

Force Restart

In case, the above-mentioned methods did not work for you, then you can try to force restart your Apple device.

However, If you are not familiar with the forced restart process of your Apple device, then you will be able to know how to perform this action on your particular Apple device model in the below passage:

For iPhone 6S, 6S Plus or below iPhone Models/iPod Touches and iPads:

The below-described steps are for iPhone 6S, 6S Plus or below iPhone Models and iPad touches and iPads:

  1. At first, press and hold down the Power button and at the same time press down the Home button of your Apple device. Now, you will get an Apple logo on the screen of your device. 
  2. After completing the restart process, you need to try to sign into iClound to see that the issue is resolved or not. 

For iPhone 7 and iPhone 7 Plus Models 

The below-described steps are for iPhone 7 and iPhone 7 Plus models:

  1. At first, press and hold down the Power button and at the same time press down the Volume Down button of your Apple device. You need to keep the buttons pressed for at least 10 seconds. Now, you will get an Apple logo on the screen of your device. 
  2. After completing the restart process, you need to try to sign into iCloud to see that the issue is resolved or not. 

For iPhone X, iPhone 8 and iPhone 8 Plus Models

The below-described steps are for iPhone X, iPhone 8 and iPhone 8 Plus Models:

  1. For iPhone 8, iPhone 8 Plus and iPhone X the forced restarting process is quite different than other iPhone models. At first, press down the Volume Up button of the Apple device and quickly release it. After that, again, press down the Volume Down button of the Apple device and quickly release it. 
  2. Press down and hold the Power button of the Apple device. Now, you will get an Apple logo on the screen of your device. 
  3. After you successfully completed the above-mentioned steps, verify if the Apple device is back to normal as before.  

Summing it Up

That’s all! We hope that this informative article comes in helpful and assist you to eradicate this annoying issue of connecting to the Apple ID server. Try the above-stated effective and easy troubleshooting hacks and see which one is giving you the ultimate solution in no time.

In case, you face any confusion or trouble, then please let us know in the comment section below.


Why getting iPhone Error 18?

The iPhone Error 18 occurs while users are restoring their device. However, there can be other reasons why this error code occurs. Moreover, this iPhone error code can also be seen on the iTunes application. So if you are currently facing this issue with your iPhone then follow this article right now.

Here in this article, you will get to know the causes and the methods to fix the error code. Hence, without any further delay, proceed with the article.

Possible Causes that can Lead to iPhone error 18

The possible causes that can be held responsible for the issue can be as follows:

  1. In case the iTunes application is corrupt then the issue can occur.
  2. If the iTunes is out of date then also you can get the issue.
  3. If the system’s Operating System is not up to date then also the issue persists.
  4. An out of date iPhone can also be held responsible for the issue.
  5. An issue with Internet settings can also lead to the issue.

Therefore, these were some of the causes that can lead to the issue. However, in your case, there can be other causes that can lead to the issue. Hence, we will proceed to the solution part of the article below.

Walkthrough these Methods to fix Error 18 on iPhone

For fixing the issue in an easier way, you need to follow each and every step that we have provided for you. By doing this, things won’t become complicated for you. Hence, you can now proceed to the following section in order to perform the methods:

Methods 1: Flush the DNS Cache of the System

Flushing the DNS cache of the system will ensure that the internet connection becomes smooth. Hence, you can try to perform this method in order to fix the error code. We have divided this method into two parts, let us have a look at it:

Part 1: Flushing the DNS cache on Mac

Flushing the DNS cache on Mac

  • On your Mac system, open the Applications section and then click on the Utilities option.
  • After that, choose the Terminal option.
  • At the Terminal window, enter dscacheutil -flushcache and then hit the Return key.
  • As the command executes, the DNS cache will be flushed.

This method works on Mac OS X 10.5 or later. However, for the Windows users, you can proceed to the next part below.

Part 2: Flush the DNS cache on Windows

Flush the DNS cache on Windows

  • Open the Start menu and the type Command Prompt in the search box.
  • As you choose the Command Prompt option from the results, the black Command Prompt window will open.
  • Now type ipconfig /flushdns and then press the Enter key.
  • Wait for the command to execute and then close the Command Prompt window.
  • Now check if you still get the error code.

We expect that this method will help you to fix the issue easily. However, if the issue still shows up then follow the next method.

Method 2: Reset the Lockdown Folder

By deleting or resetting the Lockdown folder on your system, iTunes will create a new directory. Hence, it will help you to fix the issue easily. Therefore, you need to try this method as soon as possible. For simplicity we have divided this method into two parts:

Part 1: Reset the Lockdown Folder on Windows System

Reset the Lockdown Folder on Windows System

  • On Windows, open the Run box using the Windows logo key and the R key at the same time.
  • Once the Run box opens, enter %ProgramData% and then click on the OK button.
  • Next, locate and double-click on the Apple folder.
  • Now, find and then delete the Lockdown folder and then restart your system.
  • Once done, check for the issue.

In case you are a Mac user then follow the next section:

Part 2: Reset the Lockdown Folder on Mac

Reset the Lockdown Folder on Mac

  • Go to the Finder section and then click on the Go option.
  • After that, click on the Go to Folder section and then type /var /db /lockdown.
  • Once you have entered that, press the Return key.
  • As the Lockdown folder opens, select all the items there and then delete them.
  • Now check if the issue persists or not.

So, this is how you can fix the error code by resetting the Lockdown folder on your system.

Method 3: Update the iTunes Application to its Latest Version

Normally this error code can occur if the iTunes application is out of date. Hence, you have to update the iTunes application to its latest version. We have provided the solution in two parts for a better understanding of the procedure. Now let us have a look at it:

Part 1: Update the iTunes Application on the Windows System

Update the iTunes Application on the Windows System

  • Open the iTunes application by double-clicking on its symbol.
  • Once the iTunes application opens, click on the Help tab on the top menu bar.
  • After that, click on the Check for Updates option from the drop-down list.
  • Now, on a new window, wait for the scanning process to finish and then click on the Download iTunes button.
  • Again you have to wait till the iTunes downloads and installs its latest version automatically.
  • You can follow any on-screen prompts if they pop up.
  • Finally, when it is done, restart your system. After that, check if the error code persists or not.

We hope that this method will get the issue fixed. However, for Mac users, you can proceed to the second part below.

Part 2: Update the iTunes Application on Mac

Update the iTunes Application on Mac

  • First, click on the Apple icon at the top left corner of the screen.
  • After that, choose the App Store option from the drop-down list.
  • Now click on the More button which is associated with Software Update.
  • In the next step, click on the Update button beside the iTunes section.
  • Now, wait for the process to complete and once done, you have to restart your Mac system.
  • As the Mac restarts, you can check if the iTunes/iPhone error code is still there or not.

Therefore, this is how you can update the iTunes application to its latest version. For other methods, you can proceed to the next section.

Method 4: Delete all the Files Ending with the .ipsw Extension


Some of the users have reported that deleting the .ipsw file extension helps to resolve the error code. Hence, you can follow the steps that are given below:

  • First, you have to open the file location depending on your Operating System: Delete-all-the-Files-Ending-with-the-.ipsw-Extension-For-Windows 
    • For Windows: \Users\USERNAME\AppData\Roaming\Apple Computer\iTunes\iPhone Software UpdatesDelete-all-the-Files-Ending-with-the-.ipsw-Extension-For-Mac
    • For Mac: ~/Library/iTunes/iPhone Software Updates
  • On reaching the file location, you have to find and delete all the available .ipsw files.
  • Now close the window and restart your system.
  • Finally, check if the iPhone error (-18) during restore issue is still there or not.

So this is how deleting the .ipsw files will help you to fix the issue easily. 

Method 5: Reinstall the iTunes Application on your System

In case the iTunes application is corrupt then you have to reinstall the iTunes application. The steps that will help you to perform the method are again divided into parts. Now let’s have a look at it:

Part 1: On Windows platform

Install the iTunes Application on your System On Windows platform

  • Open the Run box and then type appwiz.cpl. After that, click on the Ok button in order to continue.
  • Once the Programs and Features window opens, click on the Publisher button.
  • Now locate and right-click on the iTunes application.
  • After that, click on the Uninstall option and then follow all the on-screen instructions to complete the uninstallation process.
  • Once done, restart the system and then download and install the latest version of iTunes from its official website.
  • After doing that, check if the error code is still there to trouble you or not.

So this is how you can proceed with the method. However, for the Mac users, you can have a look at the part below.

Part 2: On Mac platform

Install the iTunes Application on your System On Mac platform

  • At first, go to the Finder section and then open the Applications option. After that, click on the Utilities option and then click on the Terminal option.
  • As the Terminal window opens, type cd/ Applications and then hit the Return key.
  • Next, enter sudo rm -rf and again hit the Return key.
  • This will uninstall the iTunes application.
  • Once done, proceed to the Mac App Store and then download the latest version of the iTunes application on your Mac.
  • Finally, check if the issue still occurs or not.

Hopefully, now you will be able to resolve the issue easily.

The Bottom Line

So these are the methods that will help you to fix the iPhone error 18 easily. We expect you will not face any problem with the methods. However, if you need help then you can connect with reliable experts for better guidance.


Troubleshoot And Fix iTunes Won’t Open Issue With These Troubleshooting Methods

Basically, iTunes won’t open issue occurs after updating the latest version of iTunes. In such a case, iTunes may freeze up every time when you are going to launch it. This application might malfunction due to many reasons. The users got puzzled and look for the perfect methods that can be helpful for them.

Due to the outdated iTunes application, this issue occurs the most. Apart from that, if you turned off the iCloud Music Library, then it is also quite possible that you can face the same problem. If the country or the region is not set properly, then there is also a possibility of getting the same issue on your Windows 10 device. 

Unfortunately, if you are also encountering the same issue, then this article is the right choice for you as it can help you anyway. So it is highly recommended to follow the steps exactly in the same manner as described here and get rid of this issue on your own.

Effective Methods to Fix the iTunes Won’t Open Windows 10 Issue:

Here in this section, we are going to present some potential methods that can help you to resolve the iTunes won’t open on PC issue efficaciously. Thus, read out the simplified tricks and fix the problem without any sort of trouble.

But we suggest that before going to the main part, restart your device once more. Because a simple restart can even resolve the issue in many instances.

Solution 1: Launch iTunes in Safe Mode

Launch iTunes in Safe Mode

This is the most reliable solution to get rid of the iTunes not opening issue. Launching iTunes in safe mode is as effective to fix other iTunes related issues as well. To do so, the first and foremost thing that you have to do is to tap on the Ctrl and Shift key at the same time and tap on the iTunes software.

  • A pop-up box will launch on the screen with a few preferences.
  • After that, just hit on Access and as well as start the option in Safe Mode.
  • In case the method is workable for you, then review the installed plugins.
  • After that, you need to exit from the iTunes application.
  • To find the plugins, you need to tap on the Apple Computer option.
  • Now, navigate to the “C:\Users\<username>\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins”.
  • Here you have to move the plugins to another place and then copy them one after another.
  • At the final step, start the iTunes application and check if it is working or not.

If you are still getting the same issue, then copy the rest plug-ins and then strive to download that one which is the main culprit for the issue.

Solution 2: Change the Region of iTunes

Change the Region of iTunes

If the first method is not enough to solve the iTunes not responding issue, then you have to change the region of iTunes.

The first and foremost thing you have to do is to navigate to the Settings app and scroll down until you see the “iTunes & App store”. Now, tap on this option to get the login page. After that, click on your Apple ID and move to choose the ‘View Apple ID’ option.

  • In this page, you need to provide your Apple ID and password, in case required.
  • Thereafter, choose the ‘Country/Region’ option by clicking on it and navigate to the ‘Change country or region’ option as well.
  • Hit the ‘Next’ icon and then press ‘Agree’ too.
  • At the final step, review the instructions that are shown on the screen and complete the entire process.
  • Reboot your Windows 10 device once more and check if iTunes is working properly or still showing the issues.

Solution 3: Recreate and Restore iTunes Library

For Creating a New Library:

Creating a New iTunes Library

If the Library gets missing or corrupted, then you might not be able to open the iTunes on your Windows device. But there is an effective way to get rid of the problem. If you recreate the iTunes library, then it can solve the issue as well. Here’s how you can create and restore the iTunes library.

  • First of all, tap on the Shift key and choose iTunes from the list of options.
  • Now, you will be prompted to choose either an existing library or create a new one.
  • You have to hit on Create Library and be prepared to give it a random name.
  • After that, tap on the Save option.
  • Launch iTunes, and see if it’s working fine or still creating trouble. If yes, then it seems that the library is corrupted.
  • Now, exit from iTunes and try to restore it.

For Restoring the Previous Version:

Restoring the iTunes Library

First, move to the Library option and click on it. After that, navigate to choose the following path that isC:\Users\ashis\Music\iTunes\Previous iTunes Libraries”. Copy this and you have to replace it with the name of “iTunes Library”. Now, set the library as default one and then click on it.

Here, we have already shortlisted the probable reasons and the potential solutions to fix iTunes won’t open in Windows 10 issue. So, follow the methods accordingly to get fruitful results. 

But in case, if you find any sort of difficulties, then do not think twice to get in touch with us. Leave your valuable words in the comment section and let us know the exact problem you are facing now. If you have more tech-related queries, then follow our website.


Why iPhone wont Update?

iPhone won’t update is one of the fairly common issues that is faced by a number of users nowadays. If you are also facing the same you should know the reasons and the potential methods on how you can fix the issue.

Due to insufficient storage space on your system, the iPhone won’t update the issue may occur. By any case, if the updating process gets incomplete due to network failure then also you might encounter the same as well. 

So, if you are unable to reach the update server then there is also has a possibility of facing the same issue. So, whatever may be the reason, you have to solve it at the earliest possible. Keep your eyes on the entire article and follow each and every method carefully and solve the issue on your own.

How to get rid of iPhone won’t Update Issue Permanently?

Read this section thoroughly and solve it by performing the methods carefully. A simple restart can solve the issue without any hassle. So first start with this.

Solution 1: Reboot the iPhone

Reboot the iPhone

For restarting your iPhone, the first and foremost thing that you have to do is to press and hold down the power key on your iPhone. You can find it at the edges of your iPhone. Press down the button until the display becomes black. After that, wait until the Apple logo appears. Now, it’s time to connect your iPhone to the internet connection and check if you are still facing the problem or not. In case the error is still not resolved, try out the next step.

Solution 2: Check the Storage Space

Check the Storage Space

We have already said that due to lack of space you might face the iPhone not updating issue. In such a case, you have to remove some applications from your iPhone and try to update it.

To do so, first of all, make sure that your iPhone is turned on. Then, navigate to the Settings option and click on it. After that, select, General tab and then move to choose the Storage option. Here, you can see the storage capacity and check how much free space is there. If needed remove some application and then try to update your iPhone and check if the same issue is still persisting or not.

Solution 3: Remove and Download iOS Update for once more

Remove and Download iOS Update for once more

When the above two methods failed to solve your issue then move to this one. Here, you have to delete the iOS update and then try to redownload it. 

To do so, first, you have to navigate to the  Settings option. After that, tap on the General tab and from the list choose Storage by clicking on it.

Next, search for the iOS update in the list of applications.

Now, click on the iOS update icon and next hit the Delete Update icon.

Keep waiting while the uninstallation process is going on.

For re-downloading it you have to tap on the Settings option and then choose the General tab as well. Now, navigate to choose the Software Update icon and allow the download method as well. Make sure to download the latest update and also check the compatibility too.

Solution 4: Check the Charge Percentage

Check the Charge Percentage

The most important thing you need to do before updating your iPhone is to check the charge level of your iPhone. Make sure that your device has sufficient power that is over 50% charge level. If the battery is low then it can restrict you from updating your device properly. This is because the backups take too much time and I hope you don’t want your device’s battery to run out during the update process.


We expect that by executing the methods you can definitely get rid of the issue permanently. By if you still have any doubts regarding any step then lets us know that.

Else you can contact experts to more get more tricks about the updating related issues. Hopefully, they can investigate the issue and help you with the most effective methods to fix it.

If the article is beneficial for you then leave your valuable words in the feedback box. Follow our websites for more tech-related queries.


Troubleshooting Steps for iTunes Error 3194

iTunes error 3194 is one of the annoying issues which users encounter while upgrading their iPhone or other iOS devices.

The upgrade session is a seamless process. But, at times, the sudden appearance of the error code can stir a sense of frustration in the users’ minds.

During this time, you cannot upgrade nor proceed to restore the iPad or iPhone. On noticing this alert message, the next immediate measure that users take is to seek solutions. Mostly, without knowing the basic indication that the message renders.

It is necessary for all to bear some idea of the issue and its probable causes. This can quicken the pace of the troubleshooting procedure.

Therefore, adhere to the article’s instructions and the information that it aims to deliver.

More About the Error 3194 of iTunes: The Indications and Causes

The alert message flashing the error code denotes a complication in the upgrade procedure. At times, the session halts halfway through its operations.

Furthermore, when one attempts to initiate the iOS update, the application crashes both on smartphone and computer. But, all this happens due to some reason.

Due to some malfunction somewhere in the system, the problem transfers like a ripple. And before troubleshooting it, one must note the probable causes which induce the problem.

This error code generally appears when iTunes fails to establish a connection with Apple’s software update servers that are employed to activate iOS while upgrading or restoring.

If there is an issue with the iOS on the device, then also the error code tends to appear and annoy the users. Now, the reason may be the possible modification of the iOS or the expiry of the current version of the iOS.

However, now that you hold some idea about the error as well as its potential causes, you can proceed to the next section which holds the troubleshooting procedure in details.

4 Quick and Effective Ways to Resolve the iTunes Error 3194

In order to fix the frustrating error, one must adhere to the underlying procedures.

Each method holds dedicated steps which you must adhere to and implement with care. Therefore, without further delay, let us proceed to the necessary and effective solutions.

Method 1: Update iTunes

Since the error code is related to the update issues directly, the primary step which you must take is this.

You must proceed to update the iTunes just when you see the message. At times, the outdated version of iTunes tends to clash with the Operating System. Therefore, updating iTunes can lead to treat the issue comprehensively.

The older version of the iTunes hinders in the establishment of the connection that you require. That is why you must update it and then check if the issue lingers.

For troubleshooting the error 3194 in iTunes, follow the underlying steps.

  • Firstly, launch the iTunes application.
  • Then, when the window appears, head to the section of Help which fetches a number of options.
  • From those, locate the option for Check for Updates.

Finally, leave the application to do the job on its own. Wait for some time and allow the session to complete.

Then, check if the issue is resolved and if not, proceed to the next method which is sure to fight it off.

Method 2: Inspect the Host Files

In this procedure, we suggest that the users check the host files. To do this, follow the instructions that follow underneath.

Step 1: Quit iTunes in your MAC/Windows system.

Step 2: Launch the host file which possesses administrative rights.

For Windows, head to the path that follows: “c:\windows\system32\drivers\etc\hosts”

For MAC, the path: “/ect/hosts” is what you must proceed to.

Step 3: Locate the entry. Now, this redirects the procedure of signature verification to the Cydia servers.

It is the lack of this redirection or the presence of it that induces the error 3194 in iTunes.

  • In case you have present at the file’s bottom, then add a “#” to the front.
  • Now, in case you don’t find the line, make sure to add at the bottom of the host file.

Finally, proceed to save the host file and after that try to update iPhone via the iTunes. Most probably, the error will refrain from appearing again.

Method 3: Change the Host Files

In case the last methods weren’t as productive in bringing about the desired results, make sure to try the current procedure.

Now, we would like to give you a heads up! This method is slightly critical. So, while implementing the steps, be extra cautious and alert.

The error 3194 of iTunes takes place when it cannot connect to the Apple servers. The host files present in your system is associated with the way the computer accesses the internet. Now, a file misconfiguration can induce the problem.

And simply editing the file can resolve the issue. For that, the underlying steps will guide you.

  • Firstly, quit iTunes. After that, proceed to launch the host file. On Mac, open the Terminal and then type “ sudo nano /private/etc/hosts” and then hit the Return button. And on Windows, browse to system32\drivers\etc and then double-click on the host file.
  • If the system demands a password, type it. Then, locate the host file entry for the However, if you don’t find it, simply skip to the next procedure.
  • If you did, continue to add “#” and after that hit the spacebar at the beginning of the “” line.
  • Next, Save the file. Simultaneously, press the Control as well as the O button.
  • Then, proceed to Close the Terminal program or the file.
  • Restart the computer system.
  • Finally, try updating the iOS device once again.

This procedure is sure to bring favorable results. But, if it doesn’t, the next procedure surely will produce the change that you desire to notice.

However, if you find the entire procedure hectic or too complex, you can simply employ the expert assistance of a technical expert. That option is always open to you.

Method 4: Inspect the Network Connection & Security Software

The common complaint that the iPhone could not be restored for error 3194 is related to a networking issue. And because of that, you must make sure that the network is fine.

Moreover, you have to ensure if the network configuration isn’t causing it. And for that, you must adhere to the following steps.

  • Firstly, confirm that the internet connection that your system is connected to is working as normal. This is primary since if you aren’t online, you fail to reach the servers of Apple.
  • Then, proceed to disable or uninstall antivirus or security programs like Firewall. They have the tendency to block the flow of connections to some servers. However, enable or reinstall them once you are done.
  • Next, Restart the system and the modem as well.
  • Now, if you are using a Wi-Fi connection, make an attempt to connect directly to the modem through the Ethernet. This would confirm that the Wi-Fi isn’t causing the issue.

In this way, you can resolve your queries and complaints stating that the iPhone could not be restored for error 3194. Simply stick to the instructions and make sure to not skip a single step.

Some of the methods are slightly critical but are 98% effective in troubleshooting the issue.

Wrapping Up

The sight of any error tends to annoy the users. Such issues cease the otherwise normal workflow and hinder the basic functions that they need to run.

And that is why this article aims to provide thorough information for the users to rely on fix the issue completely. From the basic data regarding the problem, the potential causes which induce it, to the thorough solutions.

With the above-mentioned procedures, you can troubleshoot the issue. And you no longer have to complain that your iPhone could not be restored for error 3194. Therefore, make sure to implement them with caution.


Why getting iTunes Error 0xe8000015?

iTunes error 0xe8000015 is one of the common problems encountered by users when they try to connect their iPhone to their system by using iTunes. This error code comes up with an error message reading “iTunes could not connect to this iPhone because an unknown error occurred ( 0xe8000015).”

Generally, if the USB device drivers are damaged or corrupted then you can come across this error code. Another reason for the appearance of this error code is if the iTunes application has not been updated. Sometimes, if the iPhone configurations are missing or damaged then also this error code appears on the device.

If you are also currently facing this problem then you are in the right place. Here, in this article, we will look at all the possible workarounds which can help you to get rid of this particular problem. 

Different Methods to Resolve iTunes Error 0xe8000015

In this section, we are going to discuss all the solutions for the iTunes error code 0xe8000015. It will be best if you know what exactly is causing the error in the first place because then you’ll also know which fix to apply. However, if you’re not aware of the reason, then do not panic. Following the methods given below, one by one will definitely help you resolve the issue on your device. 

Method 1 – Checking the SIM card

If the SIM card is not inserted correctly or damaged, then the iPhone will decline to connect it properly and result in this error code on the screen. So, at first, you have to disconnect or take out the SIM card from iPhone and then insert it again, correctly. Ensure that the SIM card is perfectly inserted on the SIM card slot. After doing this, start the iPhone and then check if the error code still appears or not. 

Method 2 – Uninstall the USB Drivers and Install It Again

If the SIM card works properly but the issue still shows up, then it might be a problem with the USB drivers on the system. When you try to connect the iPhone to iTunes, the system’s USB drivers perform the principal role in connecting the two. If somehow the iPhone drivers are corrupted, damaged or not properly installed then you might get this error message on the system. So, you need uninstall the USB drivers and reinstall it. To do so, follow the steps below carefully:

Step 1 

At first, hold the Windows Home button and R key together to launch the Run dialog box. Type devmgmt.msc and then hit the Enter key or select the OK option. 

Step 2

When the Device Manager window opens, go to the left panel and locate the Universal Serial Bus Controllers(USB). Select it to expand. 

Step 3

In that section, right click on the Driver that you are using and then click on the Uninstall button to remove it. 

Step 4

After removing the driver, you should install it again. To do so, go to the Device Manager window, right click on any blank space and then select the ‘Scan for hardware changes’ button. Now, the system will start scanning to find the default driver and then properly install it. 

Step 5 

Once you are done with these steps, reboot the system and then try to connect it. After doing this, check if the problem has been eliminated or not. If you find this issue again reappearing, then you need to move to the next fix. 

Method 3 – Update the iTunes 

If you are using an older version of iTunes, then you may receive the iTunes error code 0xe8000015. Sometimes, updating iTunes can solve several issues that you face on the system. So, you must update iTunes in order to fix this problem. The following steps will help you:

Step 1

Firstly, open the iTunes application by double-clicking on the iTunes icon on the screen. If you do not find the iTunes icon on the screen, then go to the Search Panel, type iTunes and then hit the Enter button.

Step 2

When the iTunes window opens, go to the Help section to open the menu list and then click on the Check for Updates button to check whether any updates are available or not. 

Step 3 

If yes, then select the Download iTunes button to start the downloading process. After completing the downloading process, install it and then check if the error code still appears or not. 

Method 4 – Restore the iPhone

Restoring the iPhone is a feasible way to can fix the iTunes error 0xe8000015 on the device. If you do not know how you can you do this, then follow the steps which are instructed below:

Step 1

First of all, press and hold the Power key and use the sliding bar to switch Off the iPhone. After switching Off, connect the iPhone to your PC and then launch iTunes on the system.

Step 2

Next, press and hold the Power key and Home button on the iPhone and then you will see the iTunes restoration message will appear on the system. Now, select the Restore button. You need to follow the onscreen instructions carefully to finish the restoration process. 

Step 3

Once the restore process is complete, try to connect your iPhone to your PC and check if it connects correctly without any hassle.  

Method 5 – Turn Off or Deactivate Restriction on iPhone

If you have a restriction on the iPhone, then you can face this problem on the device. Sometimes, if it is turned On then the iPhone cannot access to the iTunes. So, you need to turn it Off. To disable it, follow these instructions:

Step 1

Firstly, open the Settings window. From that window, tap on the General tab. In the General section, scroll down the page and find the Restrictions, tap on it.

Step 2

When the Restrictions section opens, tap on the Disable Restrictions button to turn it Off. After turning it off, check whether the problem still shows up or not. 

Method 6 – Remove the Lockdown Folder

It is a secure and hidden folder which is created at the same time when iTunes is placed on the system. In this folder, the iTunes reserves the temporary information which it collects from updating and syncing the device. So, you need to remove the lockdown folder. Go through these steps:

Step 1

Launch the Run box by pressing the Win + R keys. Type %ProgramData% and then hit the Enter button or click on the OK option.

Step 2

When the Program Files window opens, find Apple, double click on it. In the Apple folder, scroll down the page and locate the Lockdown file, right click on it. After that, click on the Delete button to remove it. 
We hope that the above-mentioned methods are helpful to eliminate the iTunes error 0xe8000015. Go through the article and execute the methods exactly as mentioned to get the best results. If however, the methods seem to too complicated to apply by yourself, or the methods do not work, then it implies some more serious problem with your device. In such cases, you can get in touch a technical expert to overcome the situation.


How to Fix the iPad Sync Error 54?

If you are an ardent user of Apple iPad and presently facing this particular iPad sync error 54, then do not panic. Because this is something you will totally be able to fix all by yourself. And therefore, this article here will help you do just that. Therefore, you don’t need to look for a professional service to fix this issue.

Prominent Reasons Behind the iPad Sync Error 54

Although it is true that this iPad sync error is something you can fix by yourself, you will need good technical instructions for that, something you will get here in this article. But, there is something much more useful which will make the process hassle-free.

And that is the sole reason for which you encounter this particular error code. And once you know the reasons for it, you will be able to better understand all the technicalities involved in resolving this annoying error. 

That is why, in this section, you will find out about the reasons why the iPad sync error 54 is occurring. 

The first among all the causes is that the system drivers did not get the latest updates. Since updates are a critical factor for the proper functioning of iPad, lack of which will cause these error message issues. The most prominent among them is error 54. 

But what makes this that much complicated is the fact that this error code creates a problem with the updates. So, the straightforward process of just downloading and installing the update may not be the best bet for you.

In case there is any glitch in the downloading process, the iPad will have an issue with examining the update. And as such, the error 54 is what you might come across. Thus, you will not be able to update the software.

If not this, then another obvious cause of this error code issue is a technical issue associated with the Apple Application Support. This is a rather important component of the updating process that causes this error. 

Last and final possible cause of this issue is if there be a contact failure with the server. Then, in that case, the occurrence of this particular error code is imperative. 

So, now that the possible reasons behind this error code are clear, go through the rest of the article to know “how to fix the iPad Sync error 54?” 

How to Fix the iPad Sync Error 54?

Now, in this section, let’s look at how we can fix this error using suitable hacks. Follow these solutions one by one and get to know which one works for you:

Get Updates for the Apple Software 

Since Apple Software Update app is the medium through which you can get all the necessary updates for iPad, you will have to update this to make it work right and thus, fix this error code. To do this, here are the steps – 

  • In order to begin, move to the Apple Software Update app from your computer system. 
  • Now, have a look for the available updates for that app. When you find it, click on the checkbox. 
  • Furthermore, click on the Install button in order to download and install the update. 
  • Now, look for the updates for the iPad app and then install that as well. 

With this, you can easily be able to fix this particular error code. And as you can see that you will be able to update it once again. 

Get the Latest iPad Update Manually

In case, if you are unable to get the iPad updates anyway, then this is what you can do to resolve such an error:

  • First and foremost thing is to uninstall the iPad application and every related component of it. 
  • After finishing the uninstallation, go to the official website of Apple and search for the latest version of the iPad.
  • When you find it, click on the download and then install that version. Then, follow all the instructions that you will find on the screen itself. 

Use of Troubleshooter

The troubleshooter is very useful that can come in very handy if you are facing error codes like this one.

All you have to do is find the troubleshooter with the help of the Control Panel of your computer. Then, once you find it, you have to first make the troubleshooter software Run As Administrator. Once you do this, you will be able to use it to fix this iPad error code. 

Final Remark

So, as the troubleshooter is ready, you can use it to examine and solve the problem which is causing this particular error. Now, you know all the effective ways to resolve the iPad Sync Error 54.

Moreover, you can refer to the user guide to get a quick glance. Apart from this, if you have any new idea, you can provide that in the comment section.


What are the Methods to Fix iPad Error 9006?

iPad error 9006 generally occurs with the iTunes application. When a user tries to download, restore or update an iPad, the whole process suddenly freezes and iTunes sends an error message showing  “There was a problem downloading software for the iPhone. An unknown error occurred (9006).”

If you are you dealing with the same error and looking for a perfect solution, then you can follow this article as an immediate troubleshooting guide. The methods provided in this article will help you to fix this error instantly.

6 Methods to Fix iPad Update Error 9006

Here are some excellent methods, which will help you to overcome this error on your own. Try to follow the fixes one by one, until you get your iPad fixed.

Method 1: Update your iTunes version 

It can happen that you are getting this typical error if you are using an older version of iTunes. As a result of which it is getting incompatible with your device. So, you need to update the iTunes version you are using to resolve this error. Follow these instructions to update your iTunes version:

  1. First of all, open iTunes and go to Help. 
  2. Now, tap on the Check for update option.
  3. Once you notice an update is available, agree to the update and then follow the on-screen instruction in order to install the latest version of iTunes on your device.

After completing these steps, try to check the status of the error. If it persists, try to follow the next method. 

Method 2: Check Network Connection

You can also encounter this error if you are connected with a glitched internet connection. If such is the case, you should check the internet connection, whether it is functioning properly or not. If you are using a WiFi, check if the router and modem is working correctly.

Most of the times, checking and correcting network glitches can be a tricky business. So, you can always connect with a reliable technician to check and apply corrective measures to resolve this error. 

Method 3: Reboot the iDevice

You can also reboot your iDevice, to resolve this error. Follow these steps:

  1. First, press the Power (sleep/wake) button of your iDevice.
  2. Once you notice the Power slider displayed on the screen, you need to use it to turn Off your iDevice.
  3. After that, you need to use the Power button again to reboot the device.

If due to some reason, you can’t turn Off your device, you need to restart it forcefully. So, follow these instructions:

  1. Firstly, press and hold the Power and Home key at the same time until you notice the screen goes black. 
  2. After that, you will find the Apple logo appearing on the screen. Leave the button and your device will restart automatically. 

If this 9006 error still persists on your device, try to follow the next method. 

Method 4: Download the IPSW File

If iTunes fails to download the IPSW file, then also you can get this iTunes error 9006 on your device. So, you can resolve this issue by manually downloading that file and then use it to update or restore the iDevice. Try to follow these instructions:

  1. Firstly, you need to download the IPSW file from the official site. Make sure that, the downloaded file is compatible with your iDevice.
  2. Once you complete this action, you need to open iTunes and go to the summary section. 
  3. Next, you need to tap and hold the Shift key and then tap on the Update or Restore option as per your choice. 
  4. Now, it will open the file browser which will ask you to select the IPSW file.
  5. Go to the folder where you have saved the downloaded file and choose it. 

After that, your device will start updating or restoring the iPad and hopefully, the error 9006 will be resolved.

 Method 5: Reset the TCP/IP (for Windows 10 systems)

This is generally an internet connection related error. Hence, running some commands specific to resetting the winsock and rebuilding the DNS cache might help in resolving this glitch.

  1. In the Command prompt, try to run these commands in the listed order. Hit Enter after each.
    1. netsh winsock reset 
    2. netsh int ip reset 
    3. ipconfig /release
    4. ipconfig /renew 
    5. ipconfig /flushdns 
  2. After running these commands, check if this issue persists or not. If the issue is not fixed by this method, try to follow the method discussed next. 

Method 6: Make Sure that the Firewall is Not Blocking iTunes

You need to be sure that iTunes is not blocked by the firewall. In order to check this, try out these steps:

  1. Firstly, press the Windows key on your keyboard. In case, you notice there is no Windows key, you need to press the Control (Ctrl) and Escape (Esc) keys at the same time. 
  2. Tap on the magnifying icon or search field. After that, in the search field, you need to enter firewall.cpl.
  3. After that, Tap on firewall.cpl which is present in the search result. Now, you will find that the Firewall window will open.
  4. Now, tap on the  “Allow an app or feature through Windows Firewall” (Windows 10 and 8) or “Allow a program or feature through Windows Firewall” (Windows 7) and then tap on  “Change settings.” option. 
  5. After that, make sure that iTunes has been selected for both private and public networks, and that Bonjour is selected for private networks only. 
  6. In case you notice, that iTunes or Bonjour isn’t listed, you can try to click on the  “Allow another app” (Windows 10 and 8) or “Allow another program” (Windows 7). 
  7. If iTunes is not listed, tap on the Browse option and then navigate to the iTunes program. 
  8. If the  Bonjour isn’t listed, tap on the Browse option and then navigate to the mDNSResponder, which is in C:\Program Files\Bonjour\.
  9. Once you select one of the programs, tap on the Open option.
  10. After that, tap on the Add in the Add an app window (Windows 10 and 8) or Add in the Add a Program window (Windows 7).
  11. Now, in the Allowed apps (Windows 10 and 8) or Allowed Programs (Windows 7) window, tap on the OK button. 
  12. After that, you need to close the Windows Firewall window.

After completing these steps, hopefully, this 9006 error will be fixed. 

To Conclude

You can utilize the hacks that we have provided here to fix iPad error 9006 quickly and easily. Try to follow each and every step carefully. If you need any further guidance to resolve this error, you can always contact an expert. If you are aware of any other fix, you can leave that in the comment section below.