Contact Apple Technical Support Number Now:

03Jan/20
Fix Mac Error Code 8076

Fix Mac Error Code 8076 With Some Effective Steps

Mac Error Code 8076 is one of the error codes that usually occurs when the user tries to move certain files from the primary drive to another one. This error basically strikes with a complicated notice that says “Operation can’t be completed due to an unexpected error”. This error code when occurs, it blocks the user permission to access the remaining files which are annoying enough. Several users fail to crack this issue but finally, we have the grand solutions to solve this error code. So, if you want the effective solutions to fix the issue, then you have definitely come to the right spot. In this content, we will share all the probable causes and top-notch solutions to settle this issue as fast as possible.

Probable Causes Why Mac Error Code 8076 Occurs?

If you are a victim of Mac Error Code 8076 on your device, then there might be several reasons behind this error code. This error mainly arises if you mistakenly deleted an important file from the Mac device or the files go corrupted. Sometimes, if the Read/write operations go corrupted, then it will also cause error code -8076 in your system. Improper installation of the software which interfaces with each other is another prime suspect for this issue. However, you can easily terminate this issue by implementing some of the effective steps that we will discuss in the next segment.

Proven Methods to Fix Mac Error Code 8076:

We have arranged a few effective methods to eliminate Mac error code 8076 in no time. You can go through either one of these methods or all the solutions until you have the problem solved.

Method 1: Perform the Disk Utility Test on your Mac

Perform the Disk Utility Test on your Mac

Disk-Utility is an in-built feature that allows the computer to detect and eliminate all the issues automatically. You need to perform this method with the steps below to settle this error code.

  1. At first, turn on your Mac and navigate to the Disk Utility menu from the Search panel.
  2. Search for the First Aid button from the list and click on that option to open the action.
  3. Now, select the Run button and click on that to begin the Troubleshoot.
  4. After the scan gets completed, you can see all the affected files in the list. Select all the file and click on the Repair/Delete option on the bottom of the screen.
  5. Select the Delete key and tap on the Confirm button to erase the files permanently.

After successfully completing all the above steps, restart the device and check if the issue is fixed or not. If the method doesn’t work, try another solution below.

Method 2: Enter the Mac Recovery Mode to Fix this Issue

Enter the Mac Recovery Mode to Fix this Issue

Recovery mode is another way to detect and solve the issue which is also an in-built feature in Mac. Go through the steps below to accomplish the task.

  1. First of all, turn on the Mac device and when the Apple logo appears, enter the Recovery Mode.
  2. Next, choose the Utility option from the Search list. Then, you can see a Terminal option on the Menu Bar.
  3. Hit the button to open the action and simply type Reset Password in the command box.
  4. Tap the Enter key and you will be presented with Reset Password window on your screen.
  5. Select the OS Drive from the Drop-down and select the User Account that you want to reset the password for.
  6. Select the Startup Volume if it is not selected. Then, choose the Username under the Account Selection settings.
  7. Go to the Reset home directory option and tap on the Reset button to change the Password.

After completing all the steps, restart the Mac and see if the error code is resolved. If still, the issue continues, try another solution below.

Method 3: Do a Software Update on your Mac

Do a Software Update on your Mac

If your system software is going outdated with the software version, you might trigger the error code -8076 on your device. Hence, go through the steps below to update the software.

  1. At first, turn on your computer and navigate to the Apple menu from the left-top corner of the window.
  2. Select the Software Update option from the bottom of the results. Now, click on that to verify if there any available software to update for your device.
  3. Once the Mac detects any newer version to update, click on that application file and select Install.
  4. Install the software application manually on your Mac and watch the on-screen instructions to complete the process.
  5. Do the same process for all the application files and restart the device later the installation completes.

Now, check if the error code -8076 is resolved, then you easily access all of your files. If the issue still persists, try another solution below.

Conclusion

We have discussed all the possible methods to fix Mac error code 8076 in the easiest way. You can go through either one of these solutions or all the solutions until you have the problem fixed. Hope the above article was beneficial enough to guide you on how to handle this error code. In case, the error still persists and you are unable to access the files, positively you can take technical support for further assistance. Lastly, we recommend you to submit your valuable feedback below in the comment box and let us know about your experience.

27Dec/19

A Complete Guide for Mac Error Code 8058

The error code -8058 is one of the alerts which the system flashes to inform the Mac user regarding the problem. Yes, each error code indicates different problems in the system of different elements. The Mac devices, too, similar to the regular brands, are vulnerable to damage either with time or manhandling. This article attempts to focus on the indication of the Mac error code 8058 and the solutions to resolve it. However, make sure to stick through and note down the ways to remove the annoying problem with convenience.

Know More About the Error Code 8058 on Mac:

Apple devices define minimalism and therefore sophistication. Keeping the essentials intact, the devices maintain the status with premium features. But, even if they belong to a reputed brand, the devices are vulnerable to damage and malfunctioning. The problem lies in a certain section in the system. When you attempt to copy some files and then try to paste them directly on the desktop, the Mac error code 8058 arises. This message states that the operation is incomplete due to the presence of an unexpected error. Also, the users notice this error code while replicating files to the Download folder from the Store. This triggers the issue to manifest on the screen of the system and trouble the users. However, let us now discuss the various symptoms which the Mac error code 8058 gives off.

Symptoms of the Error Code 8058 on Mac:

All system errors tend to manifest some kind of symptoms which confuse the users and make them resort to solutions to fix them. The symptoms are the repercussions of the problems that arise due to certain malfunctions. However, underlying are some practical symptoms which the Mac error code 8058 triggers the system to manifest. Read along in order to determine the error so that you can identify it properly and treat it comprehensively.

  1. The Mac system turns slow and the behavior of the system is sluggish.
  2. The stored Mac file turns corrupt that too without any warning.
  3. The installed programs tend to crash due to this issue.
  4. For some time, the Mac freezes frequently.
  5. An error notification appears before the user on the screen stating “Unable to find the .dmg file”.
  6. The Mac screen also projects the error message saying “File not Found”.

These are the major symptoms which the Mac error code 8058 projects. And it is for the users to detect the error easily. However, the knowledge of such an error is not just limited to this. The users must know the causes regarding the issue. For that, proceed to read the following section which deals with that thoroughly.

Probable Causes for the Mac Error Code -8058 to Appear:

As you know, every error in a system does not manifest for no reason. There must be some cause behind it for the projection of such an annoying error. The error code -8058 in Mac can appear due to numerous reasons. Some of them are discussed below.

  1. At times, the accidental deletion, as well as the formatting files, tend to trigger this error to appear.
  2. Also, the problem manifests when the user attempts to empty the Trash files that too without cross-checking them.
  3. The corruption or deletion of the Mac files can lead to the birth of the Mac error 8058.
  4. Malware invasion can also potentially lead to this annoying problem that flashes continuously before the user on-screen.
  5. At times, the header files go corrupt which lead to the problem and so does the improper installation of some programs.

So, sum up the probable causes for the contribution to the error code -8058 to surface. However, let us now proceed to the successive section which holds a dedicated discussion of the solutions to fix the error code.

Quick and Easy Steps to Fix the Mac Error Code -8058:

Quick and Easy Steps to Fix the Mac Error Code -8058:

The error code -8058 can easily be treated with simple steps. All of them are stated underneath. Make sure to go through the dedicated procedure in order to troubleshoot the error entirely. Besides, an error can create plenty of barriers which may lead to halting the regular tasks that the users undertake in order to complete their assignments. However, to avoid such frustrating hindrances, make sure to obey the following which aims to manifest the Mac error code 8058. Now, stick through and note down the essential steps by which you can troubleshoot the frustration hovering in your minds.

  1. To begin with, head to the Finder.
  2. Then, press down the Option button present on the keyboard.
  3. After that, proceed to tap on the Go menu.
  4. Then, move on to select the Library after which you must select the folder which says Preferences.
  5. There, head over in order to select the com.apple.finder.plist. File. Then, place this folder or file in the Trash.
  6. Finally, Sign out of the Mac device after which you must Log in once again.

Now, the users won’t receive the Mac error code 8058 present on the Mac device. This procedure is actually very effective in treating the complication. Also, users all over the world have found satisfaction in troubleshooting the error successfully.

In this way, the annoying and frustrating errors can find release and the problems tend to disappear only with effective solutions. However, in case, the issue persists, consult immediate expert service which can repair the entire problem seamlessly. But, it is a common recommendation to make an attempt to troubleshoot the Mac error code 8058 issue on your own. Therefore, hands-on experience is essential in order to know the functionality as well as the treatment of certain complications that the system tries to manifest. Now, you can enjoy the Mac device to the utmost without any potential hindrances. Thus, even the most sophisticated device, like the Mac tends to ‘stagger’.

25Dec/19

How to Fix iPad Error 4013?

iPad error 4013 is one of the common errors that annoy its users. Users generally encounter this error while trying to restore their iPad with iTunes. Once you encounter this error, the restore operation cannot be carried out and thus you can’t use your iPad until you get this issue fixed. Thus, we have stressed upon this error specifically in this article. Those who are experiencing this error on their iPad can refer to this article. Hope, it is going to help you and provide a proper solution. 

Methods to Fix iPad Error 4013 Manually

Generally, the 4013 error is associated with a hardware issue. Still, we have sorted out some of the effective ways that can help you in this aspect. So, let’s talk about them and solve the issue. 

Method 1: Check the USB Connector and Port

A faulty USB cable or port is found to be causing this issue in most of the cases. Thus, make sure that the USB connector or the port isn’t faulty.

  1. To ensure this, connect your iPad to another USB port of your PC via the same USB cable. 
  2. Then launch iTunes on your PC and try to restore your device. 
  3. If the process fails, then change the USB cable and try out the restore process. 
  4. If the iPad restore error 4013 repeats itself, then none of the USB port or connector is faulty. 
  5. Hence you will need to go for some other solution. 

Though it is easy to apply the methods, it is difficult to figure out the actual cause of this error. Thus, you can consult with a tech expert to help you in this regard. 

Method 2: Configuration of iPad

Configuration of iPad

iPad error 4013 can occur due to an incorrect configuration of the iPad. Thus, reset your iPad settings in order to fix system malfunctions by the following steps:

  1. At first, restart the iPad and open the Settings app. 
  2. Navigate to the ‘General Settings’ section and tap the ‘Reset’ button.
  3. Then select the ‘Reset All Settings’ option and wait for the process to complete.

Method 3: Check the Internet Connection

  1. At first turn off the WiFi on both your iPad and computer. 
  2. After a few seconds, turn on the WiFi on your iPad as well as your computer. 
  3. Then launch iTunes on your PC and see whether you can restore your device or not. 
  4. If the process fails, then shift to another network that has good strength. 

Method 4: Enable the DFU Mode

Enable the DFU Mode

DFU Mode is also known as the Recovery Mode that is capable of fixing different iOS problems in no time. 

  1. Connect your iPad to your PC via a USB connector and open iTunes. 
  2. Press and hold the ‘Sleep/Wake’ and ‘Home’ buttons on your iPad until it enters the DFU mode. 
  3. Now release the buttons mentioned above and restore your iPad. 

Method 5: Update iTunes

Update iTunes

  1. Turn on both your iPad and computer and connect them to a wireless connection. 
  2. Now, launch iTunes on your PC and click the ‘iTunes’ menu on the iTunes window. 
  3. iTunes starts checking for the available updates and displays if any updates are pending. 
  4. Then click the ‘Install’ button next to the pending updates to get them on your PC.
  5. After installing the pending updates, see whether it is possible to restore your iPad or not. 

Method 6: Free Up Disk Space 

Free Up Disk Space 

Restoration of iPad with iTunes might fail if there isn’t enough space available on your device. Hence free up some space on your iOS device to check whether you can restore your device or not. 

  1. Turn on your iPad and open the Settings app. 
  2. Click the ‘General’ tab on the Settings window and select the ‘Storage and iCloud usage’ option. 
  3. Tap the ‘Manage Storage’ button and choose an app which you think is taking too much space on your device. 
  4. Tap and hold the app until an ‘Uninstall’ option appears. 
  5. Then, select the ‘Uninstall’ option to remove that app from your device. 
  6. Repeat the same process if it is essential, to uninstall more apps installed on your iPad. 
  7. Now, restore your device and if the process is successful, then you can re-download the uninstalled apps from the App Store. 

Method 7: Perform a Factory Reset

Perform a Factory Reset

It is the last method you can attempt if the above methods fail to fix the iPad error 4013. Note that it is a bit complicated method and can delete all data on your iPad. Thus, it is recommended to backup your device before applying the following steps:

  1. Turn on your iPad and make sure that it is connected to a network.
  2. Go to Settings and tap on ‘iCloud.’
  3.  Move to the ‘Backup’ tab and choose ‘iCloud Backup.’
  4. Tap the ‘Backup Now’ button and wait until the backup is complete. 
  5. Then go back to Settings and select ‘Manage Storage’ to ensure that you have backed up your iPad successfully. 
  6. Now open the Setting app once again and tap the ‘Reset’ button under the ‘General’ tab.
  7. Tap the ‘Erase All Content and Settings’ button and enter the passcode you have set for your device. You don’t have to worry if you haven’t set a passcode for your device beforehand. 
  8. When prompted, enter both your Apple ID and password to start the factory reset. 
  9. When the reset is over, you will come across a welcome screen which you need to swipe. 
  10. Hope, you won’t have any issues in restoring your device now. 

The methods discussed in this article are already tested and fixed iPad error 4013 successfully for a number of users. Therefore, hopefully, you will also find them useful and get rid of your problem without any hassles. For any additional information or queries, shoot your feedback in the comment section below. 

22Dec/19

How to Fix Apple iPhone Error 1035?

Apple iPhone Error 1035 is a visual voicemail error. You may encounter the error message “Visual Voicemail is currently unavailable” due to a network problem. This is not generally a knotty problem and you can fix Apple I Phone Error 1035 easily without panicking. Apple I Phone was the first cell phone to come up with this feature in which one can randomly access voicemail with the help of a visual interface.

Get Smart Tricks and Tips to Resolve Apple iPhone Error 1035| Ultimate Solutions At your Fingertips

In recent years, Apple has become one of the leading companies that manufacture high-end smartphones and other advanced gadgets. With its user-friendly features, Apple has grabbed user attention to a great extent. It introduced the iPhone which has created a miracle worldwide. Thus, Apple has become one of the tech giants in the technology sector.

Besides powerful performance and high back up, the iPhone provides you with other facilities as well. With time, it is obvious to encounter tech glitches with your device. One of the common errors is Apple iPhone error 1035. Go through the following write-up and find excellent solutions suitable for you.

Fix Apple iPhone Error 1035

What is Apple iPhone error 1035?

The error 1035 is basically a voicemail error that occurs due to a network problem. A message pop-ups on your screen stating “Voicemail is currently unavailable”. It is generally a software related issue which arises due to a poor mobile network. Usually, the problem is minor and can be fixed very easily. Do not feel lost or devastated, and check out the awesome hacks in the following section.

How to fix iPhone error 1035? Easy Hacks

Unlike any other device, Apple products can cause a lot of trouble. Either the device stops functioning or won’t start up at all. Is your iPhone malfunctioning? Then your worry is over as here are some troubleshooting hacks to resolve Apple iPhone error 1035 quickly.

Solution 1: Setup iPhone Voicemail

Setup iPhone Voicemail

  • First, turn off the wifi from your iPhone
  • Now, tap the Dialer icon
  • Long Press the key ‘1’
  • Next, enter the password and try to access the voicemail
  • Press “*” key
  • Now, tap “3” to access the Greeting Menu
  • Set your Password
  • Then, restart your phone
  • The error will be resolved

Solution 2: Change or Reset Network Settings

Change or Reset Network Settings

iPhone Error 1035 voicemail related error is most likely to happen due to the bad network. Resetting the network settings will restore the network connectivity to its correct state availing more exposure to the cellular network.

Check the following guidelines to reset the setting of the network.

  • Go to Settings
  • Click on to  General
  • Now, go to Reset
  • Click on Reset Network Settings
  • After doing so, reboot iPhone
  • Check whether it is working fine or not

Solution 3: Fix the Airplane Mode

Fix the Airplane Mode

Airplane Mode is an option that connects you with the cellular signal which helps you make calls. Most of the time, we keep the Airplane Mode on to avail cellular signal and connectivity.  If there is a problem with the connectivity, go to “Settings” and turn the “Airplane Mode” “On”. After waiting for a few seconds, turn the “Airplane Mode” “Off” again. Now go back to Voicemail and see is the error has resolved or not.

The Apple I Phone Error 1035 is not a big deal and can be fixed by setting up voicemail and resetting network settings.

Find the Below Mentioned Solutions to Troubleshoot Apple iPhone Error 1035:

Go through the depth solution below to rectify the voicemail problem on your own.

Solution 1: Fix Airplane Mode

Airplane Mode is an option that connects you with the cellular signal which helps you make calls. Most of the time, we keep the Airplane Mode on to avail cellular signal and connectivity.  If there is a problem with the connectivity, go to “Settings” and turn the “Airplane Mode” “On”. After waiting for few seconds, turn the “Airplane Mode” “Off” again. Now go back to Voicemail. Things will start work normally as before. It is done to avail better quality network connectivity to allow voicemail to perform normally.

If this does not work, step to the next solution.

Related Blog: How To Fix iPhone Error Code 53 ?

Solution 2: Resetting of Network Setting

I phone Error 1035 voicemail related error is most likely to happen due to bad network. Resetting the network setting restores the network connectivity to its healthy state availing more exposure to a cellular network. To reset network setting go to Settings -> General -> Reset -> Reset Network Settings.  After doing so, reboot I phone and check whether it is working fine or not.

Solution 3: Resetting of Voicemail Password

If you call our expert technicians at Apple Technical Support Phone Number, the more basic they will provide you is to resetting of you Voicemail Password. And trust me it works. To reset your voicemail password, go to Settings -> Phone -> Change Voicemail Password.

These three solutions will surely help you to fix the Apple I phone Error 1035. If you still face the error, it is advisable to go to a place where the network connectivity is strong.

Support-for-iPhone

Call us at iPhone Technical Support Number for More Assistance:

Even after connecting to a stronger network or WIFI the issue remains the same, call us at iPhone Support Phone Number to get your issue resolved right away. They will understand what kind of issue you are getting in your I Phone set and help you to resolve it in no time. Other than that, they will also assist you with an expert recommendation to keep your Apple I phone away from such errors in the future.

Still struggling with Apple iPhone error 1035? We know how important your iPhone is to you. If you want instant support, call us directly at our Apple Support. We ensure you that your problem will be resolved in no time. Our technicians are well experienced and will handle your device with proper care. Also, we guarantee you 100% customer satisfaction.

Reach us at our toll-free number +1-855-242-5902 and report the problem. We will guide you with the best possible solutions. Apart from calling, you can also list the problems you are encountering with your Apple product and send it on our email ID. We will get back to you shortly with excellent solutions in your budget.

Apart from that, you can also avail our Live Chat support. Get stepwise direction to resolve your problems from our expert technicians and fix the errors at the earliest.  You will find our service useful and productive.

04Jul/19

How to Backup iPhone on iTunes?

A lot of iPhone users utilize the backup to iCloud which is a common solution to use for backing up your device. However, the best way to transfer all your data is to make sure that you have your text messages is backed up on iTunes.

In this section, we will talk about how to backup iPhone on iTunes. This is useful in cases when you want to factory reset and restore your iPhone or you bought a new iPhone and want to transfer data from the old one to the new one. Sometimes, you just want to clear files to have some breathing space on your iPhone. Hence, let’s dive right into the method.

How to Backup iPhone on iTunes without any Glitch

If you back up the iPhone on iTunes, it will be easy for you to access the data anywhere and anytime using WiFi. But the backup process can be confusing sometimes. 

Hence, you need to know the exact procedure on how to backup iPhone on iTunes without any glitches. Here, we will discuss encrypted and unencrypted backups to your computer and their location as well.

The steps below are for the unencrypted backups to your computer.

Step 1

launch the iTunes application on your comput eror Mac

The first thing you want to do is to launch the iTunes application on your comput eror Mac and connect the iPhone using the lightning connector. You may need to follow on-screen instructions on your iPhone. Now, your iPhone will appear on iTunes. Now move to the left-hand corner and you will find a little iPhone icon in the top left corner, tap on that. 

Step 2

right-hand side section, you will find the backup settings option. If the selection is iCloud, then change it to This Computer

When you come to the right-hand side section, you will find the backup settings option. If the selection is iCloud, then change it to This Computer. Now, all your future backups will be backed up to this computer and not the iCloud.

Since these are the steps for the unencrypted backup, simply hit the Back up now option. You will find that the backup process has been started and the iPhone is being backed up to your computer.

This will backup everything on your iPhone to your computer but the Health and Activity Data. If you want to backup your Health and Activity Data to your computer, you need to encrypt it. To do that, follow the steps mentioned in the section below.

Step 1

At first, go and check the location if the backup on your computer. Open any folder on your computer. Now, using the folder tree, at the left-hand side, go to the C-drive. After that, on the right-hand side, go and select the Users option. Then, select the User Name and tap on the App Data option.

Step 2

Thereafter, select the Roaming option and choose Apple Computer from that section. After that, click on the MobileSync option. Finally, select the Backup option.

You will find the backup folder which has all your backup data when you do a backup in iTunes. You can copy it and save it to your external hard drive to avoid accidental damages such if your computer got corrupted for some reasons.

Hence, move ahead and check how to take an encrypted backup so that you can back up your Health and Activity Data as well.

Step 3

Now, in the same backup section of iTunes, you have to select the Encrypt iPhone Backup option. When you select that, it will ask you to create a password. It is better to write the password somewhere and store it safely because you can not restore your backup without the password. And there is no other way to recover the password.

Step 4

When you are done, type the Password two times and simply tap on the Set Password section. As soon as you tap on the button, your iTunes will start backing up your iPhone automatically. Next time when you connect your iPhone to iTunes, you just have to tap that Backup Now button and the backup will be encrypted automatically.

When you want to restore this backup, you will need the backup password. This backing up process is going to take a long time. When the backup process has been completed, check the latest date and time of the encrypted backup.

You can verify it by going to the Edit option. Click on that and a drop-down menu will appear on the system screen. Select the Preferences option. After that, select the Devices option and you will find the latest iTunes backup with encryption. 

You will find a small lock there which indicates that the backup is encrypted. And since it is encrypted, it has your Health and Activity Data as well. These are the steps that you can apply to backup your iPhone on iTunes.

Wrapping it Up

Therefore, these are the steps that you can apply to backup iPhone on iTunes. Simply go through the above steps carefully and apply them in order to do that. If you face any problem regarding this, simply post your queries in the comment section below. We will get back to you with accurate information and solutions.

03Jul/19

Why there was an Error Connecting to Apple ID Server?

The error statement “Verification failed. There was an error connecting to the Apple ID server” is one of the most common and troublesome error notifications whenever attempting to authenticate to the ID server of Apple.

Moreover, a lot of iPhone and Mac users have confronted these types of issue on the system. You may encounter this annoying technical glitch due to poor internet connection, incorrect computer time setting, erroneous Keychain Access and improper certificate settings. 

However, if you are stuck with this same error notification and wondering how to fix it. Then, pat your back as you have dropped on the right page.

Here, in this informative post, we will walk you through some of the most effective and easiest troubleshooting hacks by which you can easily get rid of this annoying technical glitch on your own. 

Error Connecting to the Apple ID Server: Quick and Effective Fixes      

You can easily resolve this troublesome technical glitch by some easy troubleshooting fixes and you do not even require any extra technical knowledge or ideas to execute the troubleshooting ways and steps.

However, you will find several types of ways and steps to troubleshoot this common technical glitch. But, you need to perform some effective ways which can ensure the optimal solution in no time.

Here, in this passage, we have described some effective ways to diagnose this issue. Thus, without delaying too much. Let’s get into the solutions directly.  

Way 1: Update the Time and Date

Update the Time and Date

This is the most fundamental method that you should try to resolve this annoying technical glitch. Moreover, you need to make sure that the date and time of the system is set properly.

On this note, check the below-stated steps:

  1. At first, you need to go to the Settings of the system. 
  2. Tap on the General option in the Settings menu. 
  3. Choose the Date and Time option in the general menu.
  4. In this step, you need to turn on the toggle Set Automatically and ensure you have chosen the correct time zone.
  5. After completing all the above-mentioned steps, restart the system for good measure. 
  6. Now, check the system to verify that the error notification is resolved or not. 

Way 2: Sign Out from iTunes & App Store

Sign Out from iTunes & App Store

By performing this method, you can fix several minor technical bugs of the system. Moreover, this is not a troublesome task. You just require to follow some easy steps.

Therefore, take a look at the below-mentioned passage in detail to know the steps on how to sign out from the iTunes application and app store.

  1. At first, launch the Settings app. 
  2. After that, try to open the iTunes application & App Stores.
  3. Then, hit your Apple ID. you may find your ID at the top right corner. 
  4. Now, you will get a pop-up window which shows up on the screen. 
  5. Next, you need to select sign out from that pop-up window.
  6. Whenever it sings you out, sign back in with the help of your Apple ID.

Way 3: Log out and Log into Your Wi-Fi

Log out and Log into Your Wi-Fi

In case, the above-mentioned method did not work for you. Then, try this method in order to fix this frustrating technical glitch. You need to log out and log into your wifi network to fix such type of connectivity issues.

On this note, go through the following section:

  1. At first, you need to go to the Settings menu. 
  2. Choose the Wi-Fi option in the Settings menu. 
  3. Select the info button which is next to your Wi-Fi network
  4. Ta[p on the Forget This Network option.
  5. Choose the Forget button whenever prompted to verify your choice.
  6. Now, it’s time to turn off the network of your Wi-Fi. Now, you need to wait for a minute while and again turn on the Wi-Fi.
  7. Choose the same Wi-Fi network whenever the networks of the Wi-Fi show up.
  8. After that, you may require to write the password of the Wi-Fi network to choose the Wi-Fi network and log in.  

Way 4: Reset Network Settings

Reset Network Settings

Are you still facing the same technical glitch? You need to try to reset the network settings of the iPhone. Moreover, you need to keep in your mind that the procedure will not delete any data from the memory for the phone.

This process will only delete the network settings and passwords of the Wi-Fi network. To reset the settings of the network, check out the following steps:

  1. At first, you need to go to the Settings of the system. 
  2. Tap on the General option in the Settings menu.
  3. Now, scroll down to the bottom and choose the Reset section. 
  4. After that, select the Reset Network Settings option. You need to enter the password of the network if needed. 
  5. Now, a pop-up dialog box will show up on the screen. Choose the Reset network settings button in the pop-up dialog box to confirm your choice. 
  6. Tap on the Ok button.

Way 5: Change Your Apple ID Password

Change Your Apple ID Password

In case, the password of your Apple ID is old, then it may not meet Apple’s recommendations for security purposes. Moreover, there is a high chance that this can be the cause of verification issues.

Fortunately, you can easily replace it on any device along with an internet connection. To change the password of your Apple ID, go through the following steps:

  1. At first, go to the Apple ID website. 
  2. After that, tap on the Manage your Apple ID option on the website. Now, you need to sign in with your Apple account by entering the correct ID and Password of the account. 
  3. After signing in to your Apple account, tap on the Password and Security option. You may get this option in the left menu of the screen.
  4. Now, you need to answer all the security type questions of your Apple account. This process will verify your identity. (Here, in this step, you can also enter the particular number or code that Apple sends to your mobile phone.)
  5. After that, tap on the Change Password option. Now, you will get a new page on the screen. 
  6. In the new screen, enter the current (old) password of your Apple account. 
  7. After that, write a new password for your Apple account. Write the password twice to confirm the new password for your Apple account.
  8. Tap on the Ok button to save the changes that you have made on the password screen. 
  9. Whenever the page allows it, you will require to update the new password on all your Apple Devices.
  10. Reboot the system after completing all the steps. 

Now, you should be capable to log into your iCloud account by utilizing any Apple Device. If the troublesome issue still persists, it is advised to move out to the below solutions. 

Way 6: Force Restart

Force Restart

In case, the above-mentioned methods did not work for you, then you can try to force restart your Apple device.

However, If you are not familiar with the forced restart process of your Apple device, then you will be able to know how to perform this action on your particular Apple device model in the below passage:

For iPhone 6S, 6S Plus or below iPhone Models/iPod Touches and iPads:

The below-described steps are for iPhone 6S, 6S Plus or below iPhone Models and iPad touches and iPads:

  1. At first, press and hold down the Power button and at the same time press down the Home button of your Apple device. Now, you will get an Apple logo on the screen of your device. 
  2. After completing the restart process, you need to try to sign into iClound to see that the issue is resolved or not. 

For iPhone 7 and iPhone 7 Plus Models 

The below-described steps are for iPhone 7 and iPhone 7 Plus models:

  1. At first, press and hold down the Power button and at the same time press down the Volume Down button of your Apple device. You need to keep the buttons pressed for at least 10 seconds. Now, you will get an Apple logo on the screen of your device. 
  2. After completing the restart process, you need to try to sign into iCloud to see that the issue is resolved or not. 

For iPhone X, iPhone 8 and iPhone 8 Plus Models

The below-described steps are for iPhone X, iPhone 8 and iPhone 8 Plus Models:

  1. For iPhone 8, iPhone 8 Plus and iPhone X the forced restarting process is quite different than other iPhone models. At first, press down the Volume Up button of the Apple device and quickly release it. After that, again, press down the Volume Down button of the Apple device and quickly release it. 
  2. Press down and hold the Power button of the Apple device. Now, you will get an Apple logo on the screen of your device. 
  3. After you successfully completed the above-mentioned steps, verify if the Apple device is back to normal as before.  

Summing it Up

That’s all! We hope that this informative article comes in helpful and assist you to eradicate this annoying issue of connecting to the Apple ID server. Try the above-stated effective and easy troubleshooting hacks and see which one is giving you the ultimate solution in no time.

In case, you face any confusion or trouble, then please let us know in the comment section below.

02Jul/19

Why getting iPhone Error 18?

The iPhone Error 18 occurs while users are restoring their device. However, there can be other reasons why this error code occurs. Moreover, this iPhone error code can also be seen on the iTunes application. So if you are currently facing this issue with your iPhone then follow this article right now.

Here in this article, you will get to know the causes and the methods to fix the error code. Hence, without any further delay, proceed with the article.

Possible Causes that can Lead to iPhone error 18

The possible causes that can be held responsible for the issue can be as follows:

  1. In case the iTunes application is corrupt then the issue can occur.
  2. If the iTunes is out of date then also you can get the issue.
  3. If the system’s Operating System is not up to date then also the issue persists.
  4. An out of date iPhone can also be held responsible for the issue.
  5. An issue with Internet settings can also lead to the issue.

Therefore, these were some of the causes that can lead to the issue. However, in your case, there can be other causes that can lead to the issue. Hence, we will proceed to the solution part of the article below.

Walkthrough these Methods to fix Error 18 on iPhone

For fixing the issue in an easier way, you need to follow each and every step that we have provided for you. By doing this, things won’t become complicated for you. Hence, you can now proceed to the following section in order to perform the methods:

Methods 1: Flush the DNS Cache of the System

Flushing the DNS cache of the system will ensure that the internet connection becomes smooth. Hence, you can try to perform this method in order to fix the error code. We have divided this method into two parts, let us have a look at it:

Part 1: Flushing the DNS cache on Mac

Flushing the DNS cache on Mac

  • On your Mac system, open the Applications section and then click on the Utilities option.
  • After that, choose the Terminal option.
  • At the Terminal window, enter dscacheutil -flushcache and then hit the Return key.
  • As the command executes, the DNS cache will be flushed.

This method works on Mac OS X 10.5 or later. However, for the Windows users, you can proceed to the next part below.

Part 2: Flush the DNS cache on Windows

Flush the DNS cache on Windows

  • Open the Start menu and the type Command Prompt in the search box.
  • As you choose the Command Prompt option from the results, the black Command Prompt window will open.
  • Now type ipconfig /flushdns and then press the Enter key.
  • Wait for the command to execute and then close the Command Prompt window.
  • Now check if you still get the error code.

We expect that this method will help you to fix the issue easily. However, if the issue still shows up then follow the next method.

Method 2: Reset the Lockdown Folder

By deleting or resetting the Lockdown folder on your system, iTunes will create a new directory. Hence, it will help you to fix the issue easily. Therefore, you need to try this method as soon as possible. For simplicity we have divided this method into two parts:

Part 1: Reset the Lockdown Folder on Windows System

Reset the Lockdown Folder on Windows System

  • On Windows, open the Run box using the Windows logo key and the R key at the same time.
  • Once the Run box opens, enter %ProgramData% and then click on the OK button.
  • Next, locate and double-click on the Apple folder.
  • Now, find and then delete the Lockdown folder and then restart your system.
  • Once done, check for the issue.

In case you are a Mac user then follow the next section:

Part 2: Reset the Lockdown Folder on Mac

Reset the Lockdown Folder on Mac

  • Go to the Finder section and then click on the Go option.
  • After that, click on the Go to Folder section and then type /var /db /lockdown.
  • Once you have entered that, press the Return key.
  • As the Lockdown folder opens, select all the items there and then delete them.
  • Now check if the issue persists or not.

So, this is how you can fix the error code by resetting the Lockdown folder on your system.

Method 3: Update the iTunes Application to its Latest Version

Normally this error code can occur if the iTunes application is out of date. Hence, you have to update the iTunes application to its latest version. We have provided the solution in two parts for a better understanding of the procedure. Now let us have a look at it:

Part 1: Update the iTunes Application on the Windows System

Update the iTunes Application on the Windows System

  • Open the iTunes application by double-clicking on its symbol.
  • Once the iTunes application opens, click on the Help tab on the top menu bar.
  • After that, click on the Check for Updates option from the drop-down list.
  • Now, on a new window, wait for the scanning process to finish and then click on the Download iTunes button.
  • Again you have to wait till the iTunes downloads and installs its latest version automatically.
  • You can follow any on-screen prompts if they pop up.
  • Finally, when it is done, restart your system. After that, check if the error code persists or not.

We hope that this method will get the issue fixed. However, for Mac users, you can proceed to the second part below.

Part 2: Update the iTunes Application on Mac

Update the iTunes Application on Mac

  • First, click on the Apple icon at the top left corner of the screen.
  • After that, choose the App Store option from the drop-down list.
  • Now click on the More button which is associated with Software Update.
  • In the next step, click on the Update button beside the iTunes section.
  • Now, wait for the process to complete and once done, you have to restart your Mac system.
  • As the Mac restarts, you can check if the iTunes/iPhone error code is still there or not.

Therefore, this is how you can update the iTunes application to its latest version. For other methods, you can proceed to the next section.

Method 4: Delete all the Files Ending with the .ipsw Extension

 

Some of the users have reported that deleting the .ipsw file extension helps to resolve the error code. Hence, you can follow the steps that are given below:

  • First, you have to open the file location depending on your Operating System: Delete-all-the-Files-Ending-with-the-.ipsw-Extension-For-Windows 
    • For Windows: \Users\USERNAME\AppData\Roaming\Apple Computer\iTunes\iPhone Software UpdatesDelete-all-the-Files-Ending-with-the-.ipsw-Extension-For-Mac
    • For Mac: ~/Library/iTunes/iPhone Software Updates
  • On reaching the file location, you have to find and delete all the available .ipsw files.
  • Now close the window and restart your system.
  • Finally, check if the iPhone error (-18) during restore issue is still there or not.

So this is how deleting the .ipsw files will help you to fix the issue easily. 

Method 5: Reinstall the iTunes Application on your System

In case the iTunes application is corrupt then you have to reinstall the iTunes application. The steps that will help you to perform the method are again divided into parts. Now let’s have a look at it:

Part 1: On Windows platform

Install the iTunes Application on your System On Windows platform

  • Open the Run box and then type appwiz.cpl. After that, click on the Ok button in order to continue.
  • Once the Programs and Features window opens, click on the Publisher button.
  • Now locate and right-click on the iTunes application.
  • After that, click on the Uninstall option and then follow all the on-screen instructions to complete the uninstallation process.
  • Once done, restart the system and then download and install the latest version of iTunes from its official website.
  • After doing that, check if the error code is still there to trouble you or not.

So this is how you can proceed with the method. However, for the Mac users, you can have a look at the part below.

Part 2: On Mac platform

Install the iTunes Application on your System On Mac platform

  • At first, go to the Finder section and then open the Applications option. After that, click on the Utilities option and then click on the Terminal option.
  • As the Terminal window opens, type cd/ Applications and then hit the Return key.
  • Next, enter sudo rm -rf iTunes.app/ and again hit the Return key.
  • This will uninstall the iTunes application.
  • Once done, proceed to the Mac App Store and then download the latest version of the iTunes application on your Mac.
  • Finally, check if the issue still occurs or not.

Hopefully, now you will be able to resolve the issue easily.

The Bottom Line

So these are the methods that will help you to fix the iPhone error 18 easily. We expect you will not face any problem with the methods. However, if you need help then you can connect with reliable experts for better guidance.

02Jul/19

Troubleshoot And Fix iTunes Won’t Open Issue With These Troubleshooting Methods

Basically, iTunes won’t open issue occurs after updating the latest version of iTunes. In such a case, iTunes may freeze up every time when you are going to launch it. This application might malfunction due to many reasons. The users got puzzled and look for the perfect methods that can be helpful for them.

Due to the outdated iTunes application, this issue occurs the most. Apart from that, if you turned off the iCloud Music Library, then it is also quite possible that you can face the same problem. If the country or the region is not set properly, then there is also a possibility of getting the same issue on your Windows 10 device. 

Unfortunately, if you are also encountering the same issue, then this article is the right choice for you as it can help you anyway. So it is highly recommended to follow the steps exactly in the same manner as described here and get rid of this issue on your own.

Effective Methods to Fix the iTunes Won’t Open Windows 10 Issue:

Here in this section, we are going to present some potential methods that can help you to resolve the iTunes won’t open on PC issue efficaciously. Thus, read out the simplified tricks and fix the problem without any sort of trouble.

But we suggest that before going to the main part, restart your device once more. Because a simple restart can even resolve the issue in many instances.

Solution 1: Launch iTunes in Safe Mode

Launch iTunes in Safe Mode

This is the most reliable solution to get rid of the iTunes not opening issue. Launching iTunes in safe mode is as effective to fix other iTunes related issues as well. To do so, the first and foremost thing that you have to do is to tap on the Ctrl and Shift key at the same time and tap on the iTunes software.

  • A pop-up box will launch on the screen with a few preferences.
  • After that, just hit on Access and as well as start the option in Safe Mode.
  • In case the method is workable for you, then review the installed plugins.
  • After that, you need to exit from the iTunes application.
  • To find the plugins, you need to tap on the Apple Computer option.
  • Now, navigate to the “C:\Users\<username>\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins”.
  • Here you have to move the plugins to another place and then copy them one after another.
  • At the final step, start the iTunes application and check if it is working or not.

If you are still getting the same issue, then copy the rest plug-ins and then strive to download that one which is the main culprit for the issue.

Solution 2: Change the Region of iTunes

Change the Region of iTunes

If the first method is not enough to solve the iTunes not responding issue, then you have to change the region of iTunes.

The first and foremost thing you have to do is to navigate to the Settings app and scroll down until you see the “iTunes & App store”. Now, tap on this option to get the login page. After that, click on your Apple ID and move to choose the ‘View Apple ID’ option.

  • In this page, you need to provide your Apple ID and password, in case required.
  • Thereafter, choose the ‘Country/Region’ option by clicking on it and navigate to the ‘Change country or region’ option as well.
  • Hit the ‘Next’ icon and then press ‘Agree’ too.
  • At the final step, review the instructions that are shown on the screen and complete the entire process.
  • Reboot your Windows 10 device once more and check if iTunes is working properly or still showing the issues.

Solution 3: Recreate and Restore iTunes Library

For Creating a New Library:

Creating a New iTunes Library

If the Library gets missing or corrupted, then you might not be able to open the iTunes on your Windows device. But there is an effective way to get rid of the problem. If you recreate the iTunes library, then it can solve the issue as well. Here’s how you can create and restore the iTunes library.

  • First of all, tap on the Shift key and choose iTunes from the list of options.
  • Now, you will be prompted to choose either an existing library or create a new one.
  • You have to hit on Create Library and be prepared to give it a random name.
  • After that, tap on the Save option.
  • Launch iTunes, and see if it’s working fine or still creating trouble. If yes, then it seems that the library is corrupted.
  • Now, exit from iTunes and try to restore it.

For Restoring the Previous Version:

Restoring the iTunes Library

First, move to the Library option and click on it. After that, navigate to choose the following path that isC:\Users\ashis\Music\iTunes\Previous iTunes Libraries”. Copy this and you have to replace it with the name of “iTunes Library”. Now, set the library as default one and then click on it.

Here, we have already shortlisted the probable reasons and the potential solutions to fix iTunes won’t open in Windows 10 issue. So, follow the methods accordingly to get fruitful results. 

But in case, if you find any sort of difficulties, then do not think twice to get in touch with us. Leave your valuable words in the comment section and let us know the exact problem you are facing now. If you have more tech-related queries, then follow our website.

02Jul/19

Why iPhone wont Update?

iPhone won’t update is one of the fairly common issues that is faced by a number of users nowadays. If you are also facing the same you should know the reasons and the potential methods on how you can fix the issue.

Due to insufficient storage space on your system, the iPhone won’t update the issue may occur. By any case, if the updating process gets incomplete due to network failure then also you might encounter the same as well. 

So, if you are unable to reach the update server then there is also has a possibility of facing the same issue. So, whatever may be the reason, you have to solve it at the earliest possible. Keep your eyes on the entire article and follow each and every method carefully and solve the issue on your own.

How to get rid of iPhone won’t Update Issue Permanently?

Read this section thoroughly and solve it by performing the methods carefully. A simple restart can solve the issue without any hassle. So first start with this.

Solution 1: Reboot the iPhone

Reboot the iPhone

For restarting your iPhone, the first and foremost thing that you have to do is to press and hold down the power key on your iPhone. You can find it at the edges of your iPhone. Press down the button until the display becomes black. After that, wait until the Apple logo appears. Now, it’s time to connect your iPhone to the internet connection and check if you are still facing the problem or not. In case the error is still not resolved, try out the next step.

Solution 2: Check the Storage Space

Check the Storage Space

We have already said that due to lack of space you might face the iPhone not updating issue. In such a case, you have to remove some applications from your iPhone and try to update it.

To do so, first of all, make sure that your iPhone is turned on. Then, navigate to the Settings option and click on it. After that, select, General tab and then move to choose the Storage option. Here, you can see the storage capacity and check how much free space is there. If needed remove some application and then try to update your iPhone and check if the same issue is still persisting or not.

Solution 3: Remove and Download iOS Update for once more

Remove and Download iOS Update for once more

When the above two methods failed to solve your issue then move to this one. Here, you have to delete the iOS update and then try to redownload it. 

To do so, first, you have to navigate to the  Settings option. After that, tap on the General tab and from the list choose Storage by clicking on it.

Next, search for the iOS update in the list of applications.

Now, click on the iOS update icon and next hit the Delete Update icon.

Keep waiting while the uninstallation process is going on.

For re-downloading it you have to tap on the Settings option and then choose the General tab as well. Now, navigate to choose the Software Update icon and allow the download method as well. Make sure to download the latest update and also check the compatibility too.

Solution 4: Check the Charge Percentage

Check the Charge Percentage

The most important thing you need to do before updating your iPhone is to check the charge level of your iPhone. Make sure that your device has sufficient power that is over 50% charge level. If the battery is low then it can restrict you from updating your device properly. This is because the backups take too much time and I hope you don’t want your device’s battery to run out during the update process.

EndNote…

We expect that by executing the methods you can definitely get rid of the issue permanently. By if you still have any doubts regarding any step then lets us know that.

Else you can contact experts to more get more tricks about the updating related issues. Hopefully, they can investigate the issue and help you with the most effective methods to fix it.

If the article is beneficial for you then leave your valuable words in the feedback box. Follow our websites for more tech-related queries.